/* $Id: AbcSimplexPrimal.hpp 2385 2019-01-06 19:43:06Z unxusr $ */
// Copyright (C) 2002, International Business Machines
// Corporation and others, Copyright (C) 2012, FasterCoin. All Rights Reserved.
// This code is licensed under the terms of the Eclipse Public License (EPL).
/*
Authors
John Forrest
*/
#ifndef AbcSimplexPrimal_H
#define AbcSimplexPrimal_H
#include "AbcSimplex.hpp"
/** This solves LPs using the primal simplex method
It inherits from AbcSimplex. It has no data of its own and
is never created - only cast from a AbcSimplex object at algorithm time.
*/
class AbcSimplexPrimal : public AbcSimplex {
public:
/**@name Description of algorithm */
//@{
/** Primal algorithm
Method
It tries to be a single phase approach with a weight of 1.0 being
given to getting optimal and a weight of infeasibilityCost_ being
given to getting primal feasible. In this version I have tried to
be clever in a stupid way. The idea of fake bounds in dual
seems to work so the primal analogue would be that of getting
bounds on reduced costs (by a presolve approach) and using
these for being above or below feasible region. I decided to waste
memory and keep these explicitly. This allows for non-linear
costs! I have not tested non-linear costs but will be glad
to do something if a reasonable example is provided.
The code is designed to take advantage of sparsity so arrays are
seldom zeroed out from scratch or gone over in their entirety.
The only exception is a full scan to find incoming variable for
Dantzig row choice. For steepest edge we keep an updated list
of dual infeasibilities (actually squares).
On easy problems we don't need full scan - just
pick first reasonable. This method has not been coded.
One problem is how to tackle degeneracy and accuracy. At present
I am using the modification of costs which I put in OSL and which was
extended by Gill et al. I am still not sure whether we will also
need explicit perturbation.
The flow of primal is three while loops as follows:
while (not finished) {
while (not clean solution) {
Factorize and/or clean up solution by changing bounds so
primal feasible. If looks finished check fake primal bounds.
Repeat until status is iterating (-1) or finished (0,1,2)
}
while (status==-1) {
Iterate until no pivot in or out or time to re-factorize.
Flow is:
choose pivot column (incoming variable). if none then
we are primal feasible so looks as if done but we need to
break and check bounds etc.
Get pivot column in tableau
Choose outgoing row. If we don't find one then we look
primal unbounded so break and check bounds etc. (Also the
pivot tolerance is larger after any iterations so that may be
reason)
If we do find outgoing row, we may have to adjust costs to
keep going forwards (anti-degeneracy). Check pivot will be stable
and if unstable throw away iteration and break to re-factorize.
If minor error re-factorize after iteration.
Update everything (this may involve changing bounds on
variables to stay primal feasible.
}
}
TODO's (or maybe not)
At present we never check we are going forwards. I overdid that in
OSL so will try and make a last resort.
Needs partial scan pivot in option.
May need other anti-degeneracy measures, especially if we try and use
loose tolerances as a way to solve in fewer iterations.
I like idea of dynamic scaling. This gives opportunity to decouple
different implications of scaling for accuracy, iteration count and
feasibility tolerance.
for use of exotic parameter startFinishoptions see Clpsimplex.hpp
*/
int primal(int ifValuesPass = 0, int startFinishOptions = 0);
//@}
/**@name For advanced users */
//@{
/// Do not change infeasibility cost and always say optimal
void alwaysOptimal(bool onOff);
bool alwaysOptimal() const;
/** Normally outgoing variables can go out to slightly negative
values (but within tolerance) - this is to help stability and
and degeneracy. This can be switched off
*/
void exactOutgoing(bool onOff);
bool exactOutgoing() const;
//@}
/**@name Functions used in primal */
//@{
/** This has the flow between re-factorizations
Returns a code to say where decision to exit was made
Problem status set to:
-2 re-factorize
-4 Looks optimal/infeasible
-5 Looks unbounded
+3 max iterations
valuesOption has original value of valuesPass
*/
int whileIterating(int valuesOption);
/** Do last half of an iteration. This is split out so people can
force incoming variable. If solveType_ is 2 then this may
re-factorize while normally it would exit to re-factorize.
Return codes
Reasons to come out (normal mode/user mode):
-1 normal
-2 factorize now - good iteration/ NA
-3 slight inaccuracy - refactorize - iteration done/ same but factor done
-4 inaccuracy - refactorize - no iteration/ NA
-5 something flagged - go round again/ pivot not possible
+2 looks unbounded
+3 max iterations (iteration done)
With solveType_ ==2 this should
Pivot in a variable and choose an outgoing one. Assumes primal
feasible - will not go through a bound. Returns step length in theta
Returns ray in ray_
*/
int pivotResult(int ifValuesPass = 0);
int pivotResult4(int ifValuesPass = 0);
/** The primals are updated by the given array.
Returns number of infeasibilities.
After rowArray will have cost changes for use next iteration
*/
int updatePrimalsInPrimal(CoinIndexedVector *rowArray,
double theta,
double &objectiveChange,
int valuesPass);
/** The primals are updated by the given array.
costs are changed
*/
void updatePrimalsInPrimal(CoinIndexedVector &rowArray,
double theta, bool valuesPass);
/** After rowArray will have cost changes for use next iteration
*/
void createUpdateDuals(CoinIndexedVector &rowArray,
const double *originalCost,
const double extraCost[4],
double &objectiveChange,
int valuesPass);
/** Update minor candidate vector - new reduced cost returned
later try and get change in reduced cost (then may not need sequence in)*/
double updateMinorCandidate(const CoinIndexedVector &updateBy,
CoinIndexedVector &candidate,
int sequenceIn);
/// Update partial Ftran by R update
void updatePartialUpdate(CoinIndexedVector &partialUpdate);
/// Do FT update as separate function for minor iterations (nonzero return code on problems)
int doFTUpdate(CoinIndexedVector *vector[4]);
/**
Row array has pivot column
This chooses pivot row.
Rhs array is used for distance to next bound (for speed)
For speed, we may need to go to a bucket approach when many
variables go through bounds
If valuesPass non-zero then compute dj for direction
*/
void primalRow(CoinIndexedVector *rowArray,
CoinIndexedVector *rhsArray,
CoinIndexedVector *spareArray,
int valuesPass);
typedef struct {
double theta_;
double alpha_;
double saveDualIn_;
double dualIn_;
double lowerIn_;
double upperIn_;
double valueIn_;
int sequenceIn_;
int directionIn_;
double dualOut_;
double lowerOut_;
double upperOut_;
double valueOut_;
int sequenceOut_;
int directionOut_;
int pivotRow_;
int valuesPass_;
} pivotStruct;
void primalRow(CoinIndexedVector *rowArray,
CoinIndexedVector *rhsArray,
CoinIndexedVector *spareArray,
pivotStruct &stuff);
/**
Chooses primal pivot column
updateArray has cost updates (also use pivotRow_ from last iteration)
Would be faster with separate region to scan
and will have this (with square of infeasibility) when steepest
For easy problems we can just choose one of the first columns we look at
*/
void primalColumn(CoinPartitionedVector *updateArray,
CoinPartitionedVector *spareRow2,
CoinPartitionedVector *spareColumn1);
/** Checks if tentative optimal actually means unbounded in primal
Returns -3 if not, 2 if is unbounded */
int checkUnbounded(CoinIndexedVector *ray, CoinIndexedVector *spare,
double changeCost);
/** Refactorizes if necessary
Checks if finished. Updates status.
lastCleaned refers to iteration at which some objective/feasibility
cleaning too place.
type - 0 initial so set up save arrays etc
- 1 normal -if good update save
- 2 restoring from saved
*/
void statusOfProblemInPrimal(int type);
/// Perturbs problem (method depends on perturbation())
void perturb(int type);
/// Take off effect of perturbation and say whether to try dual
bool unPerturb();
/// Unflag all variables and return number unflagged
int unflag();
/** Get next superbasic -1 if none,
Normal type is 1
If type is 3 then initializes sorted list
if 2 uses list.
*/
int nextSuperBasic(int superBasicType, CoinIndexedVector *columnArray);
/// Create primal ray
void primalRay(CoinIndexedVector *rowArray);
/// Clears all bits and clears rowArray[1] etc
void clearAll();
/// Sort of lexicographic resolve
int lexSolve();
//@}
};
#endif
/* vi: softtabstop=2 shiftwidth=2 expandtab tabstop=2
*/