source: Alps/releases/1.4.6/Alps/Makefile.in

Last change on this file was 1816, checked in by tkr, 5 years ago

temporarily committing release candidate

File size: 32.4 KB
Line 
1# Makefile.in generated by automake 1.9.6 from Makefile.am.
2# @configure_input@
3
4# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
5# 2003, 2004, 2005  Free Software Foundation, Inc.
6# This Makefile.in is free software; the Free Software Foundation
7# gives unlimited permission to copy and/or distribute it,
8# with or without modifications, as long as this notice is preserved.
9
10# This program is distributed in the hope that it will be useful,
11# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
12# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
13# PARTICULAR PURPOSE.
14
15@SET_MAKE@
16
17#==========================================================================#
18# This file is part of the Abstract Library for Parallel Search (ALPS).    #
19#                                                                          #
20# ALPS is distributed under the Eclipse Public License as part of the      #
21# COIN-OR repository (http://www.coin-or.org).                             #
22#                                                                          #
23# Authors:                                                                 #
24#                                                                          #
25#          Yan Xu, Lehigh University                                       #
26#          Ted Ralphs, Lehigh University                                   #
27#                                                                          #
28# Conceptual Design:                                                       #
29#                                                                          #
30#          Yan Xu, Lehigh University                                       #
31#          Ted Ralphs, Lehigh University                                   #
32#          Laszlo Ladanyi, IBM T.J. Watson Research Center                 #
33#          Matthew Saltzman, Clemson University                            #
34#                                                                          #
35#                                                                          #
36# Copyright (C) 2001-2013, Lehigh University, Yan Xu, and Ted Ralphs.      #
37# All Rights Reserved.                                                     #
38#==========================================================================#
39
40# Copyright (C) 2006, 2007 International Business Machines and others.
41# All Rights Reserved.
42# This file is distributed under the Eclipse Public License.
43
44# Author:  Andreas Waechter           IBM    2006-04-13
45
46########################################################################
47#                    Documentation installation                        #
48########################################################################
49
50srcdir = @srcdir@
51top_srcdir = @top_srcdir@
52VPATH = @srcdir@
53pkgdatadir = $(datadir)/@PACKAGE@
54pkglibdir = $(libdir)/@PACKAGE@
55pkgincludedir = $(includedir)/@PACKAGE@
56top_builddir = .
57am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
58INSTALL = @INSTALL@
59install_sh_DATA = $(install_sh) -c -m 644
60install_sh_PROGRAM = $(install_sh) -c
61install_sh_SCRIPT = $(install_sh) -c
62INSTALL_HEADER = $(INSTALL_DATA)
63transform = $(program_transform_name)
64NORMAL_INSTALL = :
65PRE_INSTALL = :
66POST_INSTALL = :
67NORMAL_UNINSTALL = :
68PRE_UNINSTALL = :
69POST_UNINSTALL = :
70build_triplet = @build@
71host_triplet = @host@
72
73# We don't want to compile the test subdirectory, unless the test target is
74# specified.  But we need to list it as subdirectory to make sure that it is
75# included in the tarball
76@ALWAYS_FALSE@am__append_1 = test
77DIST_COMMON = README $(am__configure_deps) \
78        $(srcdir)/BuildTools/Makemain.inc $(srcdir)/Makefile.am \
79        $(srcdir)/Makefile.in $(srcdir)/alps-uninstalled.pc.in \
80        $(srcdir)/alps.pc.in $(top_srcdir)/configure \
81        $(top_srcdir)/examples/Abc/AbcBranchActual.cpp \
82        $(top_srcdir)/examples/Abc/AbcBranchActual.h \
83        $(top_srcdir)/examples/Abc/AbcBranchBase.cpp \
84        $(top_srcdir)/examples/Abc/AbcBranchBase.h \
85        $(top_srcdir)/examples/Abc/AbcCutGenerator.cpp \
86        $(top_srcdir)/examples/Abc/AbcCutGenerator.h \
87        $(top_srcdir)/examples/Abc/AbcHeuristic.cpp \
88        $(top_srcdir)/examples/Abc/AbcHeuristic.h \
89        $(top_srcdir)/examples/Abc/AbcMain.cpp \
90        $(top_srcdir)/examples/Abc/AbcMessage.cpp \
91        $(top_srcdir)/examples/Abc/AbcMessage.h \
92        $(top_srcdir)/examples/Abc/AbcModel.cpp \
93        $(top_srcdir)/examples/Abc/AbcModel.h \
94        $(top_srcdir)/examples/Abc/AbcNodeDesc.h \
95        $(top_srcdir)/examples/Abc/AbcParams.cpp \
96        $(top_srcdir)/examples/Abc/AbcParams.h \
97        $(top_srcdir)/examples/Abc/AbcSolution.cpp \
98        $(top_srcdir)/examples/Abc/AbcSolution.h \
99        $(top_srcdir)/examples/Abc/AbcTreeNode.cpp \
100        $(top_srcdir)/examples/Abc/AbcTreeNode.h \
101        $(top_srcdir)/examples/Abc/Makefile.in \
102        $(top_srcdir)/examples/Abc/abc.par.in \
103        $(top_srcdir)/examples/Knap/Makefile.in \
104        $(top_srcdir)/examples/Knap/knap.par.in AUTHORS TODO \
105        config.guess config.sub depcomp install-sh ltmain.sh missing
106@HAVE_EXTERNALS_TRUE@am__append_2 = Dependencies
107@HAVE_EXTERNALS_TRUE@am__append_3 = .Dependencies-stamp
108subdir = .
109ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
110am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \
111        $(top_srcdir)/configure.ac
112am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
113        $(ACLOCAL_M4)
114am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
115 configure.lineno configure.status.lineno
116mkinstalldirs = $(install_sh) -d
117CONFIG_HEADER = $(top_builddir)/src/config.h \
118        $(top_builddir)/src/config_alps.h
119CONFIG_CLEAN_FILES = examples/Abc/Makefile examples/Abc/abc.par \
120        examples/Knap/Makefile examples/Knap/knap.par alps.pc \
121        alps-uninstalled.pc
122SOURCES =
123DIST_SOURCES =
124RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
125        html-recursive info-recursive install-data-recursive \
126        install-exec-recursive install-info-recursive \
127        install-recursive installcheck-recursive installdirs-recursive \
128        pdf-recursive ps-recursive uninstall-info-recursive \
129        uninstall-recursive
130am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
131am__vpath_adj = case $$p in \
132    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
133    *) f=$$p;; \
134  esac;
135am__strip_dir = `echo $$p | sed -e 's|^.*/||'`;
136am__installdirs = "$(DESTDIR)$(pkgconfiglibdir)"
137pkgconfiglibDATA_INSTALL = $(INSTALL_DATA)
138DATA = $(pkgconfiglib_DATA)
139ETAGS = etags
140CTAGS = ctags
141DIST_SUBDIRS = src test
142DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
143distdir = $(PACKAGE)-$(VERSION)
144top_distdir = $(distdir)
145am__remove_distdir = \
146  { test ! -d $(distdir) \
147    || { find $(distdir) -type d ! -perm -200 -exec chmod u+w {} ';' \
148         && rm -fr $(distdir); }; }
149DIST_ARCHIVES = $(distdir).tar.gz
150GZIP_ENV = --best
151distuninstallcheck_listfiles = find . -type f -print
152distcleancheck_listfiles = find . -type f -print
153ABC_CFLAGS = @ABC_CFLAGS@
154ABC_CFLAGS_INSTALLED = @ABC_CFLAGS_INSTALLED@
155ABC_DEPENDENCIES = @ABC_DEPENDENCIES@
156ABC_LIBS = @ABC_LIBS@
157ABC_LIBS_INSTALLED = @ABC_LIBS_INSTALLED@
158ABC_PCLIBS = @ABC_PCLIBS@
159ABC_PCREQUIRES = @ABC_PCREQUIRES@
160ABSBUILDDIR = @ABSBUILDDIR@
161ACLOCAL = @ACLOCAL@
162ADD_CFLAGS = @ADD_CFLAGS@
163ADD_CXXFLAGS = @ADD_CXXFLAGS@
164ALPSLIB_CFLAGS = @ALPSLIB_CFLAGS@
165ALPSLIB_CFLAGS_INSTALLED = @ALPSLIB_CFLAGS_INSTALLED@
166ALPSLIB_DEPENDENCIES = @ALPSLIB_DEPENDENCIES@
167ALPSLIB_LIBS = @ALPSLIB_LIBS@
168ALPSLIB_LIBS_INSTALLED = @ALPSLIB_LIBS_INSTALLED@
169ALPSLIB_PCLIBS = @ALPSLIB_PCLIBS@
170ALPSLIB_PCREQUIRES = @ALPSLIB_PCREQUIRES@
171ALPS_SVN_REV = @ALPS_SVN_REV@
172ALWAYS_FALSE_FALSE = @ALWAYS_FALSE_FALSE@
173ALWAYS_FALSE_TRUE = @ALWAYS_FALSE_TRUE@
174AMDEP_FALSE = @AMDEP_FALSE@
175AMDEP_TRUE = @AMDEP_TRUE@
176AMTAR = @AMTAR@
177AR = @AR@
178AUTOCONF = @AUTOCONF@
179AUTOHEADER = @AUTOHEADER@
180AUTOMAKE = @AUTOMAKE@
181AUX_DIR = @AUX_DIR@
182AWK = @AWK@
183BUILDTOOLSDIR = @BUILDTOOLSDIR@
184CC = @CC@
185CCDEPMODE = @CCDEPMODE@
186CDEFS = @CDEFS@
187CFLAGS = @CFLAGS@
188CLP_CFLAGS = @CLP_CFLAGS@
189CLP_CFLAGS_INSTALLED = @CLP_CFLAGS_INSTALLED@
190CLP_DATA = @CLP_DATA@
191CLP_DATA_INSTALLED = @CLP_DATA_INSTALLED@
192CLP_DEPENDENCIES = @CLP_DEPENDENCIES@
193CLP_LIBS = @CLP_LIBS@
194CLP_LIBS_INSTALLED = @CLP_LIBS_INSTALLED@
195COINUTILS_CFLAGS = @COINUTILS_CFLAGS@
196COINUTILS_CFLAGS_INSTALLED = @COINUTILS_CFLAGS_INSTALLED@
197COINUTILS_DATA = @COINUTILS_DATA@
198COINUTILS_DATA_INSTALLED = @COINUTILS_DATA_INSTALLED@
199COINUTILS_DEPENDENCIES = @COINUTILS_DEPENDENCIES@
200COINUTILS_LIBS = @COINUTILS_LIBS@
201COINUTILS_LIBS_INSTALLED = @COINUTILS_LIBS_INSTALLED@
202COIN_CC_IS_CL_FALSE = @COIN_CC_IS_CL_FALSE@
203COIN_CC_IS_CL_TRUE = @COIN_CC_IS_CL_TRUE@
204COIN_CXX_IS_CL_FALSE = @COIN_CXX_IS_CL_FALSE@
205COIN_CXX_IS_CL_TRUE = @COIN_CXX_IS_CL_TRUE@
206COIN_HAS_CLP_FALSE = @COIN_HAS_CLP_FALSE@
207COIN_HAS_CLP_TRUE = @COIN_HAS_CLP_TRUE@
208COIN_HAS_COINUTILS_FALSE = @COIN_HAS_COINUTILS_FALSE@
209COIN_HAS_COINUTILS_TRUE = @COIN_HAS_COINUTILS_TRUE@
210COIN_HAS_MPI_FALSE = @COIN_HAS_MPI_FALSE@
211COIN_HAS_MPI_TRUE = @COIN_HAS_MPI_TRUE@
212COIN_HAS_PKGCONFIG_FALSE = @COIN_HAS_PKGCONFIG_FALSE@
213COIN_HAS_PKGCONFIG_TRUE = @COIN_HAS_PKGCONFIG_TRUE@
214COIN_PKG_CONFIG_PATH = @COIN_PKG_CONFIG_PATH@
215COIN_PKG_CONFIG_PATH_UNINSTALLED = @COIN_PKG_CONFIG_PATH_UNINSTALLED@
216CPP = @CPP@
217CPPFLAGS = @CPPFLAGS@
218CXX = @CXX@
219CXXCPP = @CXXCPP@
220CXXDEFS = @CXXDEFS@
221CXXDEPMODE = @CXXDEPMODE@
222CXXFLAGS = @CXXFLAGS@
223CYGPATH_W = @CYGPATH_W@
224DBG_CFLAGS = @DBG_CFLAGS@
225DBG_CXXFLAGS = @DBG_CXXFLAGS@
226DEFS = @DEFS@
227DEPDIR = @DEPDIR@
228DEPENDENCY_LINKING_FALSE = @DEPENDENCY_LINKING_FALSE@
229DEPENDENCY_LINKING_TRUE = @DEPENDENCY_LINKING_TRUE@
230ECHO = @ECHO@
231ECHO_C = @ECHO_C@
232ECHO_N = @ECHO_N@
233ECHO_T = @ECHO_T@
234EGREP = @EGREP@
235EXEEXT = @EXEEXT@
236F77 = @F77@
237FFLAGS = @FFLAGS@
238HAVE_EXTERNALS_FALSE = @HAVE_EXTERNALS_FALSE@
239HAVE_EXTERNALS_TRUE = @HAVE_EXTERNALS_TRUE@
240INSTALL_DATA = @INSTALL_DATA@
241INSTALL_PROGRAM = @INSTALL_PROGRAM@
242INSTALL_SCRIPT = @INSTALL_SCRIPT@
243INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
244LDFLAGS = @LDFLAGS@
245LIBEXT = @LIBEXT@
246LIBOBJS = @LIBOBJS@
247LIBS = @LIBS@
248LIBTOOL = @LIBTOOL@
249LIBTOOLM4 = @LIBTOOLM4@
250LN_S = @LN_S@
251LTLIBOBJS = @LTLIBOBJS@
252LT_LDFLAGS = @LT_LDFLAGS@
253MAINT = @MAINT@
254MAINTAINER_MODE_FALSE = @MAINTAINER_MODE_FALSE@
255MAINTAINER_MODE_TRUE = @MAINTAINER_MODE_TRUE@
256MAKEINFO = @MAKEINFO@
257MPICC = @MPICC@
258MPICXX = @MPICXX@
259MPIINCDIR = @MPIINCDIR@
260MPILIB = @MPILIB@
261OBJEXT = @OBJEXT@
262OPT_CFLAGS = @OPT_CFLAGS@
263OPT_CXXFLAGS = @OPT_CXXFLAGS@
264PACKAGE = @PACKAGE@
265PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
266PACKAGE_NAME = @PACKAGE_NAME@
267PACKAGE_STRING = @PACKAGE_STRING@
268PACKAGE_TARNAME = @PACKAGE_TARNAME@
269PACKAGE_VERSION = @PACKAGE_VERSION@
270PATH_SEPARATOR = @PATH_SEPARATOR@
271PKG_CONFIG = @PKG_CONFIG@
272RANLIB = @RANLIB@
273RPATH_FLAGS = @RPATH_FLAGS@
274SET_MAKE = @SET_MAKE@
275SHELL = @SHELL@
276STRIP = @STRIP@
277VERSION = @VERSION@
278VPATH_DISTCLEANFILES = @VPATH_DISTCLEANFILES@
279abs_bin_dir = @abs_bin_dir@
280abs_include_dir = @abs_include_dir@
281abs_lib_dir = @abs_lib_dir@
282abs_source_dir = @abs_source_dir@
283ac_c_preproc_warn_flag = @ac_c_preproc_warn_flag@
284ac_ct_AR = @ac_ct_AR@
285ac_ct_CC = @ac_ct_CC@
286ac_ct_CXX = @ac_ct_CXX@
287ac_ct_F77 = @ac_ct_F77@
288ac_ct_PKG_CONFIG = @ac_ct_PKG_CONFIG@
289ac_ct_RANLIB = @ac_ct_RANLIB@
290ac_ct_STRIP = @ac_ct_STRIP@
291ac_cxx_preproc_warn_flag = @ac_cxx_preproc_warn_flag@
292am__fastdepCC_FALSE = @am__fastdepCC_FALSE@
293am__fastdepCC_TRUE = @am__fastdepCC_TRUE@
294am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@
295am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@
296am__include = @am__include@
297am__leading_dot = @am__leading_dot@
298am__quote = @am__quote@
299am__tar = @am__tar@
300am__untar = @am__untar@
301bindir = @bindir@
302build = @build@
303build_alias = @build_alias@
304build_cpu = @build_cpu@
305build_os = @build_os@
306build_vendor = @build_vendor@
307datadir = @datadir@
308exec_prefix = @exec_prefix@
309have_autoconf = @have_autoconf@
310have_automake = @have_automake@
311have_svn = @have_svn@
312have_svnversion = @have_svnversion@
313host = @host@
314host_alias = @host_alias@
315host_cpu = @host_cpu@
316host_os = @host_os@
317host_vendor = @host_vendor@
318includedir = @includedir@
319infodir = @infodir@
320install_sh = @install_sh@
321libdir = @libdir@
322libexecdir = @libexecdir@
323localstatedir = @localstatedir@
324mandir = @mandir@
325mkdir_p = @mkdir_p@
326oldincludedir = @oldincludedir@
327prefix = @prefix@
328program_transform_name = @program_transform_name@
329sbindir = @sbindir@
330sharedstatedir = @sharedstatedir@
331sol_cc_compiler = @sol_cc_compiler@
332sysconfdir = @sysconfdir@
333target_alias = @target_alias@
334AUTOMAKE_OPTIONS = foreign
335
336########################################################################
337#                          Subdirectories                              #
338########################################################################
339SUBDIRS = src $(am__append_1)
340
341########################################################################
342#             Additional files to be included in tarball               #
343########################################################################
344
345# Here we need include all files that are not mentioned in other Makefiles
346EXTRA_DIST = examples/Abc/AbcBranchActual.cpp \
347        examples/Abc/AbcBranchActual.h examples/Abc/AbcBranchBase.cpp \
348        examples/Abc/AbcBranchBase.h examples/Abc/AbcCutGenerator.cpp \
349        examples/Abc/AbcCutGenerator.h examples/Abc/AbcHeuristic.cpp \
350        examples/Abc/AbcHeuristic.h examples/Abc/AbcMain.cpp \
351        examples/Abc/AbcMessage.cpp examples/Abc/AbcMessage.h \
352        examples/Abc/AbcModel.cpp examples/Abc/AbcModel.h \
353        examples/Abc/AbcNodeDesc.h examples/Abc/AbcParams.cpp \
354        examples/Abc/AbcParams.h examples/Abc/abc.par.in \
355        examples/Abc/abc.pbs examples/Abc/AbcSolution.cpp \
356        examples/Abc/AbcSolution.h examples/Abc/AbcTreeNode.cpp \
357        examples/Abc/AbcTreeNode.h examples/Abc/AUTHORS \
358        examples/Abc/INSTALL examples/Abc/LICENSE \
359        examples/Abc/Makefile.in examples/Abc/README \
360        examples/Abc/data/egout.mps examples/Abc/data/flugpl.mps \
361        examples/Abc/data/gen.mps examples/Abc/data/knap1.mps \
362        examples/Abc/data/knap2.mps examples/Abc/data/knap3.mps \
363        $(am__append_2)
364
365########################################################################
366#                  Installation of the addlibs file                    #
367########################################################################
368pkgconfiglibdir = $(libdir)/pkgconfig
369pkgconfiglib_DATA = alps.pc
370addlibsdir = $(DESTDIR)$(datadir)/coin/doc/Alps
371
372########################################################################
373#                         Maintainer Stuff                             #
374########################################################################
375
376# Files that are generated and should be cleaned with make distclean
377DISTCLEANFILES = $(am__append_3) $(VPATH_DISTCLEANFILES)
378DocFiles = README AUTHORS LICENSE
379DocInstallDir = $(datadir)/coin/doc/$(PACKAGE_NAME)
380all: all-recursive
381
382.SUFFIXES:
383am--refresh:
384        @:
385$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am $(srcdir)/BuildTools/Makemain.inc $(am__configure_deps)
386        @for dep in $?; do \
387          case '$(am__configure_deps)' in \
388            *$$dep*) \
389              echo ' cd $(srcdir) && $(AUTOMAKE) --foreign '; \
390              cd $(srcdir) && $(AUTOMAKE) --foreign  \
391                && exit 0; \
392              exit 1;; \
393          esac; \
394        done; \
395        echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign  Makefile'; \
396        cd $(top_srcdir) && \
397          $(AUTOMAKE) --foreign  Makefile
398.PRECIOUS: Makefile
399Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
400        @case '$?' in \
401          *config.status*) \
402            echo ' $(SHELL) ./config.status'; \
403            $(SHELL) ./config.status;; \
404          *) \
405            echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
406            cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
407        esac;
408
409$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
410        $(SHELL) ./config.status --recheck
411
412$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
413        cd $(srcdir) && $(AUTOCONF)
414$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
415        cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
416examples/Abc/Makefile: $(top_builddir)/config.status $(top_srcdir)/examples/Abc/Makefile.in
417        cd $(top_builddir) && $(SHELL) ./config.status $@
418examples/Abc/abc.par: $(top_builddir)/config.status $(top_srcdir)/examples/Abc/abc.par.in
419        cd $(top_builddir) && $(SHELL) ./config.status $@
420examples/Knap/Makefile: $(top_builddir)/config.status $(top_srcdir)/examples/Knap/Makefile.in
421        cd $(top_builddir) && $(SHELL) ./config.status $@
422examples/Knap/knap.par: $(top_builddir)/config.status $(top_srcdir)/examples/Knap/knap.par.in
423        cd $(top_builddir) && $(SHELL) ./config.status $@
424alps.pc: $(top_builddir)/config.status $(srcdir)/alps.pc.in
425        cd $(top_builddir) && $(SHELL) ./config.status $@
426alps-uninstalled.pc: $(top_builddir)/config.status $(srcdir)/alps-uninstalled.pc.in
427        cd $(top_builddir) && $(SHELL) ./config.status $@
428
429mostlyclean-libtool:
430        -rm -f *.lo
431
432clean-libtool:
433        -rm -rf .libs _libs
434
435distclean-libtool:
436        -rm -f libtool
437uninstall-info-am:
438install-pkgconfiglibDATA: $(pkgconfiglib_DATA)
439        @$(NORMAL_INSTALL)
440        test -z "$(pkgconfiglibdir)" || $(mkdir_p) "$(DESTDIR)$(pkgconfiglibdir)"
441        @list='$(pkgconfiglib_DATA)'; for p in $$list; do \
442          if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
443          f=$(am__strip_dir) \
444          echo " $(pkgconfiglibDATA_INSTALL) '$$d$$p' '$(DESTDIR)$(pkgconfiglibdir)/$$f'"; \
445          $(pkgconfiglibDATA_INSTALL) "$$d$$p" "$(DESTDIR)$(pkgconfiglibdir)/$$f"; \
446        done
447
448uninstall-pkgconfiglibDATA:
449        @$(NORMAL_UNINSTALL)
450        @list='$(pkgconfiglib_DATA)'; for p in $$list; do \
451          f=$(am__strip_dir) \
452          echo " rm -f '$(DESTDIR)$(pkgconfiglibdir)/$$f'"; \
453          rm -f "$(DESTDIR)$(pkgconfiglibdir)/$$f"; \
454        done
455
456# This directory's subdirectories are mostly independent; you can cd
457# into them and run `make' without going through this Makefile.
458# To change the values of `make' variables: instead of editing Makefiles,
459# (1) if the variable is set in `config.status', edit `config.status'
460#     (which will cause the Makefiles to be regenerated when you run `make');
461# (2) otherwise, pass the desired values on the `make' command line.
462$(RECURSIVE_TARGETS):
463        @failcom='exit 1'; \
464        for f in x $$MAKEFLAGS; do \
465          case $$f in \
466            *=* | --[!k]*);; \
467            *k*) failcom='fail=yes';; \
468          esac; \
469        done; \
470        dot_seen=no; \
471        target=`echo $@ | sed s/-recursive//`; \
472        list='$(SUBDIRS)'; for subdir in $$list; do \
473          echo "Making $$target in $$subdir"; \
474          if test "$$subdir" = "."; then \
475            dot_seen=yes; \
476            local_target="$$target-am"; \
477          else \
478            local_target="$$target"; \
479          fi; \
480          (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
481          || eval $$failcom; \
482        done; \
483        if test "$$dot_seen" = "no"; then \
484          $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
485        fi; test -z "$$fail"
486
487mostlyclean-recursive clean-recursive distclean-recursive \
488maintainer-clean-recursive:
489        @failcom='exit 1'; \
490        for f in x $$MAKEFLAGS; do \
491          case $$f in \
492            *=* | --[!k]*);; \
493            *k*) failcom='fail=yes';; \
494          esac; \
495        done; \
496        dot_seen=no; \
497        case "$@" in \
498          distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
499          *) list='$(SUBDIRS)' ;; \
500        esac; \
501        rev=''; for subdir in $$list; do \
502          if test "$$subdir" = "."; then :; else \
503            rev="$$subdir $$rev"; \
504          fi; \
505        done; \
506        rev="$$rev ."; \
507        target=`echo $@ | sed s/-recursive//`; \
508        for subdir in $$rev; do \
509          echo "Making $$target in $$subdir"; \
510          if test "$$subdir" = "."; then \
511            local_target="$$target-am"; \
512          else \
513            local_target="$$target"; \
514          fi; \
515          (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
516          || eval $$failcom; \
517        done && test -z "$$fail"
518tags-recursive:
519        list='$(SUBDIRS)'; for subdir in $$list; do \
520          test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
521        done
522ctags-recursive:
523        list='$(SUBDIRS)'; for subdir in $$list; do \
524          test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
525        done
526
527ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
528        list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
529        unique=`for i in $$list; do \
530            if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
531          done | \
532          $(AWK) '    { files[$$0] = 1; } \
533               END { for (i in files) print i; }'`; \
534        mkid -fID $$unique
535tags: TAGS
536
537TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
538                $(TAGS_FILES) $(LISP)
539        tags=; \
540        here=`pwd`; \
541        if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
542          include_option=--etags-include; \
543          empty_fix=.; \
544        else \
545          include_option=--include; \
546          empty_fix=; \
547        fi; \
548        list='$(SUBDIRS)'; for subdir in $$list; do \
549          if test "$$subdir" = .; then :; else \
550            test ! -f $$subdir/TAGS || \
551              tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \
552          fi; \
553        done; \
554        list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
555        unique=`for i in $$list; do \
556            if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
557          done | \
558          $(AWK) '    { files[$$0] = 1; } \
559               END { for (i in files) print i; }'`; \
560        if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \
561          test -n "$$unique" || unique=$$empty_fix; \
562          $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
563            $$tags $$unique; \
564        fi
565ctags: CTAGS
566CTAGS: ctags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
567                $(TAGS_FILES) $(LISP)
568        tags=; \
569        here=`pwd`; \
570        list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
571        unique=`for i in $$list; do \
572            if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
573          done | \
574          $(AWK) '    { files[$$0] = 1; } \
575               END { for (i in files) print i; }'`; \
576        test -z "$(CTAGS_ARGS)$$tags$$unique" \
577          || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
578             $$tags $$unique
579
580GTAGS:
581        here=`$(am__cd) $(top_builddir) && pwd` \
582          && cd $(top_srcdir) \
583          && gtags -i $(GTAGS_ARGS) $$here
584
585distclean-tags:
586        -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
587
588distdir: $(DISTFILES)
589        $(am__remove_distdir)
590        mkdir $(distdir)
591        $(mkdir_p) $(distdir)/. $(distdir)/BuildTools $(distdir)/examples/Abc $(distdir)/examples/Abc/data $(distdir)/examples/Knap
592        @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \
593        topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \
594        list='$(DISTFILES)'; for file in $$list; do \
595          case $$file in \
596            $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \
597            $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \
598          esac; \
599          if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
600          dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \
601          if test "$$dir" != "$$file" && test "$$dir" != "."; then \
602            dir="/$$dir"; \
603            $(mkdir_p) "$(distdir)$$dir"; \
604          else \
605            dir=''; \
606          fi; \
607          if test -d $$d/$$file; then \
608            if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
609              cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \
610            fi; \
611            cp -pR $$d/$$file $(distdir)$$dir || exit 1; \
612          else \
613            test -f $(distdir)/$$file \
614            || cp -p $$d/$$file $(distdir)/$$file \
615            || exit 1; \
616          fi; \
617        done
618        list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
619          if test "$$subdir" = .; then :; else \
620            test -d "$(distdir)/$$subdir" \
621            || $(mkdir_p) "$(distdir)/$$subdir" \
622            || exit 1; \
623            distdir=`$(am__cd) $(distdir) && pwd`; \
624            top_distdir=`$(am__cd) $(top_distdir) && pwd`; \
625            (cd $$subdir && \
626              $(MAKE) $(AM_MAKEFLAGS) \
627                top_distdir="$$top_distdir" \
628                distdir="$$distdir/$$subdir" \
629                distdir) \
630              || exit 1; \
631          fi; \
632        done
633        -find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \
634          ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
635          ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
636          ! -type d ! -perm -444 -exec $(SHELL) $(install_sh) -c -m a+r {} {} \; \
637        || chmod -R a+r $(distdir)
638dist-gzip: distdir
639        tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
640        $(am__remove_distdir)
641
642dist-bzip2: distdir
643        tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2
644        $(am__remove_distdir)
645
646dist-tarZ: distdir
647        tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
648        $(am__remove_distdir)
649
650dist-shar: distdir
651        shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
652        $(am__remove_distdir)
653
654dist-zip: distdir
655        -rm -f $(distdir).zip
656        zip -rq $(distdir).zip $(distdir)
657        $(am__remove_distdir)
658
659dist dist-all: distdir
660        tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
661        $(am__remove_distdir)
662
663# This target untars the dist file and tries a VPATH configuration.  Then
664# it guarantees that the distribution is self-contained by making another
665# tarfile.
666distcheck: dist
667        case '$(DIST_ARCHIVES)' in \
668        *.tar.gz*) \
669          GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(am__untar) ;;\
670        *.tar.bz2*) \
671          bunzip2 -c $(distdir).tar.bz2 | $(am__untar) ;;\
672        *.tar.Z*) \
673          uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
674        *.shar.gz*) \
675          GZIP=$(GZIP_ENV) gunzip -c $(distdir).shar.gz | unshar ;;\
676        *.zip*) \
677          unzip $(distdir).zip ;;\
678        esac
679        chmod -R a-w $(distdir); chmod a+w $(distdir)
680        mkdir $(distdir)/_build
681        mkdir $(distdir)/_inst
682        chmod a-w $(distdir)
683        dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
684          && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
685          && cd $(distdir)/_build \
686          && ../configure --srcdir=.. --prefix="$$dc_install_base" \
687            $(DISTCHECK_CONFIGURE_FLAGS) \
688          && $(MAKE) $(AM_MAKEFLAGS) \
689          && $(MAKE) $(AM_MAKEFLAGS) dvi \
690          && $(MAKE) $(AM_MAKEFLAGS) check \
691          && $(MAKE) $(AM_MAKEFLAGS) install \
692          && $(MAKE) $(AM_MAKEFLAGS) installcheck \
693          && $(MAKE) $(AM_MAKEFLAGS) uninstall \
694          && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
695                distuninstallcheck \
696          && chmod -R a-w "$$dc_install_base" \
697          && ({ \
698               (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
699               && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
700               && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
701               && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
702                    distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
703              } || { rm -rf "$$dc_destdir"; exit 1; }) \
704          && rm -rf "$$dc_destdir" \
705          && $(MAKE) $(AM_MAKEFLAGS) dist \
706          && rm -rf $(DIST_ARCHIVES) \
707          && $(MAKE) $(AM_MAKEFLAGS) distcleancheck
708        $(am__remove_distdir)
709        @(echo "$(distdir) archives ready for distribution: "; \
710          list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
711          sed -e '1{h;s/./=/g;p;x;}' -e '$${p;x;}'
712distuninstallcheck:
713        @cd $(distuninstallcheck_dir) \
714        && test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \
715           || { echo "ERROR: files left after uninstall:" ; \
716                if test -n "$(DESTDIR)"; then \
717                  echo "  (check DESTDIR support)"; \
718                fi ; \
719                $(distuninstallcheck_listfiles) ; \
720                exit 1; } >&2
721distcleancheck: distclean
722        @if test '$(srcdir)' = . ; then \
723          echo "ERROR: distcleancheck can only run from a VPATH build" ; \
724          exit 1 ; \
725        fi
726        @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
727          || { echo "ERROR: files left in build directory after distclean:" ; \
728               $(distcleancheck_listfiles) ; \
729               exit 1; } >&2
730check-am: all-am
731check: check-recursive
732all-am: Makefile $(DATA)
733installdirs: installdirs-recursive
734installdirs-am:
735        for dir in "$(DESTDIR)$(pkgconfiglibdir)"; do \
736          test -z "$$dir" || $(mkdir_p) "$$dir"; \
737        done
738install: install-recursive
739install-exec: install-exec-recursive
740install-data: install-data-recursive
741uninstall: uninstall-recursive
742
743install-am: all-am
744        @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
745
746installcheck: installcheck-recursive
747install-strip:
748        $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
749          install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
750          `test -z '$(STRIP)' || \
751            echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
752mostlyclean-generic:
753
754clean-generic:
755
756distclean-generic:
757        -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
758        -test -z "$(DISTCLEANFILES)" || rm -f $(DISTCLEANFILES)
759
760maintainer-clean-generic:
761        @echo "This command is intended for maintainers to use"
762        @echo "it deletes files that may require special tools to rebuild."
763clean: clean-recursive
764
765clean-am: clean-generic clean-libtool clean-local mostlyclean-am
766
767distclean: distclean-recursive
768        -rm -f $(am__CONFIG_DISTCLEAN_FILES)
769        -rm -f Makefile
770distclean-am: clean-am distclean-generic distclean-libtool \
771        distclean-local distclean-tags
772
773dvi: dvi-recursive
774
775dvi-am:
776
777html: html-recursive
778
779info: info-recursive
780
781info-am:
782
783install-data-am: install-pkgconfiglibDATA
784        @$(NORMAL_INSTALL)
785        $(MAKE) $(AM_MAKEFLAGS) install-data-hook
786
787install-exec-am:
788
789install-info: install-info-recursive
790
791install-man:
792
793installcheck-am:
794
795maintainer-clean: maintainer-clean-recursive
796        -rm -f $(am__CONFIG_DISTCLEAN_FILES)
797        -rm -rf $(top_srcdir)/autom4te.cache
798        -rm -f Makefile
799maintainer-clean-am: distclean-am maintainer-clean-generic
800
801mostlyclean: mostlyclean-recursive
802
803mostlyclean-am: mostlyclean-generic mostlyclean-libtool
804
805pdf: pdf-recursive
806
807pdf-am:
808
809ps: ps-recursive
810
811ps-am:
812
813uninstall-am: uninstall-info-am uninstall-pkgconfiglibDATA
814        @$(NORMAL_INSTALL)
815        $(MAKE) $(AM_MAKEFLAGS) uninstall-hook
816
817uninstall-info: uninstall-info-recursive
818
819.PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am am--refresh check \
820        check-am clean clean-generic clean-libtool clean-local \
821        clean-recursive ctags ctags-recursive dist dist-all dist-bzip2 \
822        dist-gzip dist-shar dist-tarZ dist-zip distcheck distclean \
823        distclean-generic distclean-libtool distclean-local \
824        distclean-recursive distclean-tags distcleancheck distdir \
825        distuninstallcheck dvi dvi-am html html-am info info-am \
826        install install-am install-data install-data-am \
827        install-data-hook install-exec install-exec-am install-info \
828        install-info-am install-man install-pkgconfiglibDATA \
829        install-strip installcheck installcheck-am installdirs \
830        installdirs-am maintainer-clean maintainer-clean-generic \
831        maintainer-clean-recursive mostlyclean mostlyclean-generic \
832        mostlyclean-libtool mostlyclean-recursive pdf pdf-am ps ps-am \
833        tags tags-recursive uninstall uninstall-am uninstall-hook \
834        uninstall-info-am uninstall-pkgconfiglibDATA
835
836
837########################################################################
838#                           Extra Targets                              #
839########################################################################
840
841test: all
842        cd test; $(MAKE) test
843
844unitTest: test
845
846clean-local:
847        if test -r test/Makefile; then cd test; $(MAKE) clean; fi
848
849distclean-local:
850        if test -r test/Makefile; then cd test; $(MAKE) distclean; fi
851
852.PHONY: test unitTest
853
854install-data-hook:
855        @$(mkdir_p) "$(addlibsdir)"
856@COIN_HAS_PKGCONFIG_TRUE@       PKG_CONFIG_PATH=@COIN_PKG_CONFIG_PATH@ \
857@COIN_HAS_PKGCONFIG_TRUE@       $(PKG_CONFIG) --libs alps > $(addlibsdir)/alps_addlibs.txt
858@COIN_CXX_IS_CL_TRUE@@COIN_HAS_PKGCONFIG_FALSE@ echo "-libpath:`$(CYGPATH_W) @abs_lib_dir@` libAlps.lib @ALPSLIB_LIBS_INSTALLED@" > $(addlibsdir)/alps_addlibs.txt
859@COIN_CXX_IS_CL_FALSE@@COIN_HAS_PKGCONFIG_FALSE@        echo -L@abs_lib_dir@ -lAlps @ALPSLIB_LIBS_INSTALLED@ > $(addlibsdir)/alps_addlibs.txt
860
861uninstall-hook:
862        rm -f $(addlibsdir)/alps_addlibs.txt
863
864install-doc: $(DocFiles)
865        test -z "$(DocInstallDir)" || $(mkdir_p) "$(DESTDIR)$(DocInstallDir)"
866        for file in $(DocFiles); do \
867          if test -f "$$file"; then dir=; else dir="$(srcdir)/"; fi; \
868          if test -f "$$dir$$file"; then $(INSTALL_DATA) "$$dir$$file" "$(DESTDIR)$(DocInstallDir)/$$file"; fi; \
869        done
870
871uninstall-doc:
872        for file in $(DocFiles); do \
873          rm -f "$(DESTDIR)$(DocInstallDir)/$$file"; \
874        done
875
876########################################################################
877#                         Maintainer Stuff                             #
878########################################################################
879
880# Make sure acinclude is using most recent coin.m4
881@MAINTAINER_MODE_TRUE@$(srcdir)/acinclude.m4: $(BUILDTOOLSDIR)/coin.m4
882@MAINTAINER_MODE_TRUE@  cat $(LIBTOOLM4) $< > $@
883
884# Make sure the autotools scripts are up to date
885@MAINTAINER_MODE_TRUE@$(AUX_DIR)/install-sh: $(BUILDTOOLSDIR)/install-sh
886@MAINTAINER_MODE_TRUE@  cp $< $@
887
888@MAINTAINER_MODE_TRUE@$(AUX_DIR)/missing: $(BUILDTOOLSDIR)/missing
889@MAINTAINER_MODE_TRUE@  cp $< $@
890
891@MAINTAINER_MODE_TRUE@$(AUX_DIR)/config.guess: $(BUILDTOOLSDIR)/config.guess
892@MAINTAINER_MODE_TRUE@  cp $< $@
893
894@MAINTAINER_MODE_TRUE@$(AUX_DIR)/config.sub: $(BUILDTOOLSDIR)/config.sub
895@MAINTAINER_MODE_TRUE@  cp $< $@
896
897@MAINTAINER_MODE_TRUE@$(AUX_DIR)/depcomp: $(BUILDTOOLSDIR)/depcomp
898@MAINTAINER_MODE_TRUE@  cp $< $@
899
900@MAINTAINER_MODE_TRUE@$(AUX_DIR)/ltmain.sh: $(BUILDTOOLSDIR)/ltmain.sh
901@MAINTAINER_MODE_TRUE@  cp $< $@
902
903# Take care of updating externals (if Dependencies file exists)
904@HAVE_EXTERNALS_TRUE@@MAINTAINER_MODE_TRUE@$(top_builddir)/Makefile: .Dependencies-stamp
905
906@HAVE_EXTERNALS_TRUE@@MAINTAINER_MODE_TRUE@.Dependencies-stamp: $(srcdir)/Dependencies
907@HAVE_EXTERNALS_TRUE@@MAINTAINER_MODE_TRUE@     cd $(srcdir); BuildTools/set_externals Dependencies
908@HAVE_EXTERNALS_TRUE@@MAINTAINER_MODE_TRUE@     touch .Dependencies-stamp
909
910@HAVE_EXTERNALS_TRUE@@MAINTAINER_MODE_TRUE@update-externals: .Dependencies-stamp
911@HAVE_EXTERNALS_TRUE@@MAINTAINER_MODE_TRUE@     cd $(srcdir); svn update
912
913.PHONY: install-doc uninstall-doc update-externals
914# Tell versions [3.59,3.63) of GNU make to not export all variables.
915# Otherwise a system limit (for SysV at least) may be exceeded.
916.NOEXPORT:
Note: See TracBrowser for help on using the repository browser.