source: trunk/Makefile.in @ 624

Last change on this file since 624 was 624, checked in by kulshres, 4 years ago

regenerate files

File size: 30.6 KB
Line 
1# Makefile.in generated by automake 1.13.4 from Makefile.am.
2# @configure_input@
3
4# Copyright (C) 1994-2013 Free Software Foundation, Inc.
5
6# This Makefile.in is free software; the Free Software Foundation
7# gives unlimited permission to copy and/or distribute it,
8# with or without modifications, as long as this notice is preserved.
9
10# This program is distributed in the hope that it will be useful,
11# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
12# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
13# PARTICULAR PURPOSE.
14
15@SET_MAKE@
16
17##############################################################################
18##############################################################################
19
20VPATH = @srcdir@
21am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
22am__make_running_with_option = \
23  case $${target_option-} in \
24      ?) ;; \
25      *) echo "am__make_running_with_option: internal error: invalid" \
26              "target option '$${target_option-}' specified" >&2; \
27         exit 1;; \
28  esac; \
29  has_opt=no; \
30  sane_makeflags=$$MAKEFLAGS; \
31  if $(am__is_gnu_make); then \
32    sane_makeflags=$$MFLAGS; \
33  else \
34    case $$MAKEFLAGS in \
35      *\\[\ \   ]*) \
36        bs=\\; \
37        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
38          | sed "s/$$bs$$bs[$$bs $$bs   ]*//g"`;; \
39    esac; \
40  fi; \
41  skip_next=no; \
42  strip_trailopt () \
43  { \
44    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
45  }; \
46  for flg in $$sane_makeflags; do \
47    test $$skip_next = yes && { skip_next=no; continue; }; \
48    case $$flg in \
49      *=*|--*) continue;; \
50        -*I) strip_trailopt 'I'; skip_next=yes;; \
51      -*I?*) strip_trailopt 'I';; \
52        -*O) strip_trailopt 'O'; skip_next=yes;; \
53      -*O?*) strip_trailopt 'O';; \
54        -*l) strip_trailopt 'l'; skip_next=yes;; \
55      -*l?*) strip_trailopt 'l';; \
56      -[dEDm]) skip_next=yes;; \
57      -[JT]) skip_next=yes;; \
58    esac; \
59    case $$flg in \
60      *$$target_option*) has_opt=yes; break;; \
61    esac; \
62  done; \
63  test $$has_opt = yes
64am__make_dryrun = (target_option=n; $(am__make_running_with_option))
65am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
66pkgdatadir = $(datadir)/@PACKAGE@
67pkgincludedir = $(includedir)/@PACKAGE@
68pkglibdir = $(libdir)/@PACKAGE@
69pkglibexecdir = $(libexecdir)/@PACKAGE@
70am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
71install_sh_DATA = $(install_sh) -c -m 644
72install_sh_PROGRAM = $(install_sh) -c
73install_sh_SCRIPT = $(install_sh) -c
74INSTALL_HEADER = $(INSTALL_DATA)
75transform = $(program_transform_name)
76NORMAL_INSTALL = :
77PRE_INSTALL = :
78POST_INSTALL = :
79NORMAL_UNINSTALL = :
80PRE_UNINSTALL = :
81POST_UNINSTALL = :
82build_triplet = @build@
83host_triplet = @host@
84subdir = .
85DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am \
86        $(top_srcdir)/configure $(am__configure_deps) \
87        $(top_srcdir)/ADOL-C/doc/version.tex.in \
88        $(top_srcdir)/MSVisualStudio/v14/sparse/config.h.in \
89        $(top_srcdir)/MSVisualStudio/v14/nosparse/config.h.in \
90        $(top_srcdir)/MSVisualStudio/v14/x64/sparse/config.h.in \
91        $(top_srcdir)/MSVisualStudio/v14/x64/nosparse/config.h.in \
92        $(srcdir)/adolc.spec.in $(srcdir)/adolclib.pc.in AUTHORS \
93        ChangeLog INSTALL NEWS README TODO autoconf/config.guess \
94        autoconf/config.sub autoconf/depcomp autoconf/install-sh \
95        autoconf/missing autoconf/ltmain.sh \
96        $(top_srcdir)/autoconf/config.guess \
97        $(top_srcdir)/autoconf/config.sub \
98        $(top_srcdir)/autoconf/install-sh \
99        $(top_srcdir)/autoconf/ltmain.sh \
100        $(top_srcdir)/autoconf/missing
101ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
102am__aclocal_m4_deps = $(top_srcdir)/autoconf/acx_builtin.m4 \
103        $(top_srcdir)/autoconf/ampi.m4 \
104        $(top_srcdir)/autoconf/ax_boost_base.m4 \
105        $(top_srcdir)/autoconf/ax_boost_system.m4 \
106        $(top_srcdir)/autoconf/colpack.m4 \
107        $(top_srcdir)/autoconf/libtool.m4 \
108        $(top_srcdir)/autoconf/ltoptions.m4 \
109        $(top_srcdir)/autoconf/ltsugar.m4 \
110        $(top_srcdir)/autoconf/ltversion.m4 \
111        $(top_srcdir)/autoconf/lt~obsolete.m4 \
112        $(top_srcdir)/autoconf/mpi.m4 \
113        $(top_srcdir)/autoconf/stdcxx_11.m4 $(top_srcdir)/configure.ac
114am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
115        $(ACLOCAL_M4)
116am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
117 configure.lineno config.status.lineno
118mkinstalldirs = $(install_sh) -d
119CONFIG_HEADER = $(top_builddir)/ADOL-C/src/config.h
120CONFIG_CLEAN_FILES = ADOL-C/doc/version.tex \
121        MSVisualStudio/v14/sparse/config.h \
122        MSVisualStudio/v14/nosparse/config.h \
123        MSVisualStudio/v14/x64/sparse/config.h \
124        MSVisualStudio/v14/x64/nosparse/config.h adolc.spec \
125        adolclib.pc
126CONFIG_CLEAN_VPATH_FILES =
127AM_V_P = $(am__v_P_@AM_V@)
128am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
129am__v_P_0 = false
130am__v_P_1 = :
131AM_V_GEN = $(am__v_GEN_@AM_V@)
132am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
133am__v_GEN_0 = @echo "  GEN     " $@;
134am__v_GEN_1 =
135AM_V_at = $(am__v_at_@AM_V@)
136am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
137am__v_at_0 = @
138am__v_at_1 =
139SOURCES =
140DIST_SOURCES =
141RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
142        ctags-recursive dvi-recursive html-recursive info-recursive \
143        install-data-recursive install-dvi-recursive \
144        install-exec-recursive install-html-recursive \
145        install-info-recursive install-pdf-recursive \
146        install-ps-recursive install-recursive installcheck-recursive \
147        installdirs-recursive pdf-recursive ps-recursive \
148        tags-recursive uninstall-recursive
149am__can_run_installinfo = \
150  case $$AM_UPDATE_INFO_DIR in \
151    n|no|NO) false;; \
152    *) (install-info --version) >/dev/null 2>&1;; \
153  esac
154am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
155am__vpath_adj = case $$p in \
156    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
157    *) f=$$p;; \
158  esac;
159am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
160am__install_max = 40
161am__nobase_strip_setup = \
162  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
163am__nobase_strip = \
164  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
165am__nobase_list = $(am__nobase_strip_setup); \
166  for p in $$list; do echo "$$p $$p"; done | \
167  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
168  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
169    if (++n[$$2] == $(am__install_max)) \
170      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
171    END { for (dir in files) print dir, files[dir] }'
172am__base_list = \
173  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
174  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
175am__uninstall_files_from_dir = { \
176  test -z "$$files" \
177    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
178    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
179         $(am__cd) "$$dir" && rm -f $$files; }; \
180  }
181am__installdirs = "$(DESTDIR)$(pkgconfigdir)"
182DATA = $(pkgconfig_DATA)
183RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
184  distclean-recursive maintainer-clean-recursive
185am__recursive_targets = \
186  $(RECURSIVE_TARGETS) \
187  $(RECURSIVE_CLEAN_TARGETS) \
188  $(am__extra_recursive_targets)
189AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
190        cscope distdir dist dist-all distcheck
191am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
192# Read a list of newline-separated strings from the standard input,
193# and print each of them once, without duplicates.  Input order is
194# *not* preserved.
195am__uniquify_input = $(AWK) '\
196  BEGIN { nonempty = 0; } \
197  { items[$$0] = 1; nonempty = 1; } \
198  END { if (nonempty) { for (i in items) print i; }; } \
199'
200# Make sure the list of sources is unique.  This is necessary because,
201# e.g., the same source file might be shared among _SOURCES variables
202# for different programs/libraries.
203am__define_uniq_tagged_files = \
204  list='$(am__tagged_files)'; \
205  unique=`for i in $$list; do \
206    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
207  done | $(am__uniquify_input)`
208ETAGS = etags
209CTAGS = ctags
210CSCOPE = cscope
211DIST_SUBDIRS = $(SUBDIRS)
212DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
213distdir = $(PACKAGE)-$(VERSION)
214top_distdir = $(distdir)
215am__remove_distdir = \
216  if test -d "$(distdir)"; then \
217    find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
218      && rm -rf "$(distdir)" \
219      || { sleep 5 && rm -rf "$(distdir)"; }; \
220  else :; fi
221am__post_remove_distdir = $(am__remove_distdir)
222am__relativize = \
223  dir0=`pwd`; \
224  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
225  sed_rest='s,^[^/]*/*,,'; \
226  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
227  sed_butlast='s,/*[^/]*$$,,'; \
228  while test -n "$$dir1"; do \
229    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
230    if test "$$first" != "."; then \
231      if test "$$first" = ".."; then \
232        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
233        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
234      else \
235        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
236        if test "$$first2" = "$$first"; then \
237          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
238        else \
239          dir2="../$$dir2"; \
240        fi; \
241        dir0="$$dir0"/"$$first"; \
242      fi; \
243    fi; \
244    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
245  done; \
246  reldir="$$dir2"
247DIST_ARCHIVES = $(distdir).tar.gz $(distdir).tar.bz2
248GZIP_ENV = --best
249DIST_TARGETS = dist-bzip2 dist-gzip
250distuninstallcheck_listfiles = find . -type f -print
251am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \
252  | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'
253distcleancheck_listfiles = find . -type f -print
254ACLOCAL = @ACLOCAL@
255ADOLC_PATCHLEVEL = @ADOLC_PATCHLEVEL@
256ADOLC_SUBVERSION = @ADOLC_SUBVERSION@
257ADOLC_VERSION = @ADOLC_VERSION@
258ADVBRANCH = @ADVBRANCH@
259AMTAR = @AMTAR@
260AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
261AR = @AR@
262AS = @AS@
263ATRIG_ERF = @ATRIG_ERF@
264AUTOCONF = @AUTOCONF@
265AUTOHEADER = @AUTOHEADER@
266AUTOMAKE = @AUTOMAKE@
267AWK = @AWK@
268BOOST_CPPFLAGS = @BOOST_CPPFLAGS@
269BOOST_LDFLAGS = @BOOST_LDFLAGS@
270BOOST_SYSTEM_LIB = @BOOST_SYSTEM_LIB@
271CC = @CC@
272CCDEPMODE = @CCDEPMODE@
273CFLAGS = @CFLAGS@
274CPP = @CPP@
275CPPFLAGS = @CPPFLAGS@
276CXX = @CXX@
277CXXCPP = @CXXCPP@
278CXXDEPMODE = @CXXDEPMODE@
279CXXFLAGS = @CXXFLAGS@
280CYGPATH_W = @CYGPATH_W@
281DEFS = @DEFS@
282DEPDIR = @DEPDIR@
283DLLTOOL = @DLLTOOL@
284DSYMUTIL = @DSYMUTIL@
285DUMPBIN = @DUMPBIN@
286ECHO_C = @ECHO_C@
287ECHO_N = @ECHO_N@
288ECHO_T = @ECHO_T@
289EGREP = @EGREP@
290EXEEXT = @EXEEXT@
291FGREP = @FGREP@
292GREP = @GREP@
293HAVE_CXX11 = @HAVE_CXX11@
294INSTALL = @INSTALL@
295INSTALL_DATA = @INSTALL_DATA@
296INSTALL_PROGRAM = @INSTALL_PROGRAM@
297INSTALL_SCRIPT = @INSTALL_SCRIPT@
298INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
299LD = @LD@
300LDFLAGS = @LDFLAGS@
301LIBOBJS = @LIBOBJS@
302LIBS = @LIBS@
303LIBTOOL = @LIBTOOL@
304LIPO = @LIPO@
305LN_S = @LN_S@
306LTLIBOBJS = @LTLIBOBJS@
307MAINT = @MAINT@
308MAKEINFO = @MAKEINFO@
309MANIFEST_TOOL = @MANIFEST_TOOL@
310MKDIR_P = @MKDIR_P@
311NM = @NM@
312NMEDIT = @NMEDIT@
313OBJDUMP = @OBJDUMP@
314OBJEXT = @OBJEXT@
315OTOOL = @OTOOL@
316OTOOL64 = @OTOOL64@
317PACKAGE = @PACKAGE@
318PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
319PACKAGE_NAME = @PACKAGE_NAME@
320PACKAGE_STRING = @PACKAGE_STRING@
321PACKAGE_TARNAME = @PACKAGE_TARNAME@
322PACKAGE_URL = @PACKAGE_URL@
323PACKAGE_VERSION = @PACKAGE_VERSION@
324PATH_SEPARATOR = @PATH_SEPARATOR@
325RANLIB = @RANLIB@
326REAL_TYPE = @REAL_TYPE@
327SED = @SED@
328SET_MAKE = @SET_MAKE@
329SHELL = @SHELL@
330STRIP = @STRIP@
331UINT_TYPE = @UINT_TYPE@
332VERSION = @VERSION@
333_lib = @_lib@
334abs_builddir = @abs_builddir@
335abs_srcdir = @abs_srcdir@
336abs_top_builddir = @abs_top_builddir@
337abs_top_srcdir = @abs_top_srcdir@
338ac_adolc_cflags = @ac_adolc_cflags@
339ac_adolc_cxxflags = @ac_adolc_cxxflags@
340ac_aux_dir = @ac_aux_dir@
341ac_ct_AR = @ac_ct_AR@
342ac_ct_CC = @ac_ct_CC@
343ac_ct_CXX = @ac_ct_CXX@
344ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
345adolclib = @adolclib@
346am__include = @am__include@
347am__leading_dot = @am__leading_dot@
348am__quote = @am__quote@
349am__tar = @am__tar@
350am__untar = @am__untar@
351bindir = @bindir@
352build = @build@
353build_alias = @build_alias@
354build_cpu = @build_cpu@
355build_os = @build_os@
356build_vendor = @build_vendor@
357builddir = @builddir@
358datadir = @datadir@
359datarootdir = @datarootdir@
360docdir = @docdir@
361dvidir = @dvidir@
362exec_prefix = @exec_prefix@
363host = @host@
364host_alias = @host_alias@
365host_cpu = @host_cpu@
366host_os = @host_os@
367host_vendor = @host_vendor@
368htmldir = @htmldir@
369includedir = @includedir@
370infodir = @infodir@
371install_sh = @install_sh@
372libdir = @libdir@
373libexecdir = @libexecdir@
374localedir = @localedir@
375localstatedir = @localstatedir@
376mandir = @mandir@
377mkdir_p = @mkdir_p@
378oldincludedir = @oldincludedir@
379pdfdir = @pdfdir@
380prefix = @prefix@
381program_transform_name = @program_transform_name@
382psdir = @psdir@
383saveCC = @saveCC@
384saveCXX = @saveCXX@
385sbindir = @sbindir@
386sharedstatedir = @sharedstatedir@
387srcdir = @srcdir@
388sysconfdir = @sysconfdir@
389target_alias = @target_alias@
390top_build_prefix = @top_build_prefix@
391top_builddir = @top_builddir@
392top_srcdir = @top_srcdir@
393ACLOCAL_AMFLAGS = -I autoconf
394AUTOMAKE_OPTIONS = foreign
395EXTRA_DIST = TODO BUGS LICENSE update_versions.sh \
396                       ADOL-C/doc/version.tex.in ADOL-C/doc/version.tex \
397                       ADOL-C/doc/adolc-manual.pdf ADOL-C/doc/adolc-manual.ps \
398                       ADOL-C/doc/adolc-manual.tex ADOL-C/doc/short_ref.pdf \
399                       ADOL-C/doc/short_ref.ps ADOL-C/doc/short_ref.tex \
400                       ADOL-C/doc/multiplexed.pdf ADOL-C/doc/multiplexed.eps \
401                       ADOL-C/doc/tapeadv.pdf ADOL-C/doc/tapeadv.eps \
402                       ADOL-C/doc/tapebasic.pdf ADOL-C/doc/tapebasic.eps \
403                       ADOL-C/doc/tap_point.pdf ADOL-C/doc/tap_point.eps \
404                       MSVisualStudio/v14/adolc.sln MSVisualStudio/v14/adolc.vcxproj \
405                       MSVisualStudio/v14/ColPack_Readme_VC++.txt \
406                       MSVisualStudio/v14/ColPack.vcxproj \
407                       MSVisualStudio/v14/sparse/config.h.in MSVisualStudio/v14/nosparse/config.h.in \
408                       MSVisualStudio/v14/x64/sparse/config.h.in MSVisualStudio/v14/x64/nosparse/config.h.in \
409                       MSVisualStudio/v14/sparse/config.h MSVisualStudio/v14/nosparse/config.h \
410                       MSVisualStudio/v14/x64/sparse/config.h MSVisualStudio/v14/x64/nosparse/config.h \
411                       MSVisualStudio/v14/Readme_VC++.txt \
412                       MSVisualStudio/v14/installer.sh \
413                       adolc.spec.in adolc.spec \
414                       update_versions.sh
415
416SUBDIRS = ADOL-C
417
418# install pkg-config information
419pkgconfigdir = $(libdir)/pkgconfig
420pkgconfig_DATA = @adolclib@.pc
421all: all-recursive
422
423.SUFFIXES:
424am--refresh: Makefile
425        @:
426$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
427        @for dep in $?; do \
428          case '$(am__configure_deps)' in \
429            *$$dep*) \
430              echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \
431              $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \
432                && exit 0; \
433              exit 1;; \
434          esac; \
435        done; \
436        echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
437        $(am__cd) $(top_srcdir) && \
438          $(AUTOMAKE) --foreign Makefile
439.PRECIOUS: Makefile
440Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
441        @case '$?' in \
442          *config.status*) \
443            echo ' $(SHELL) ./config.status'; \
444            $(SHELL) ./config.status;; \
445          *) \
446            echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
447            cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
448        esac;
449
450$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
451        $(SHELL) ./config.status --recheck
452
453$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
454        $(am__cd) $(srcdir) && $(AUTOCONF)
455$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
456        $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
457$(am__aclocal_m4_deps):
458ADOL-C/doc/version.tex: $(top_builddir)/config.status $(top_srcdir)/ADOL-C/doc/version.tex.in
459        cd $(top_builddir) && $(SHELL) ./config.status $@
460MSVisualStudio/v14/sparse/config.h: $(top_builddir)/config.status $(top_srcdir)/MSVisualStudio/v14/sparse/config.h.in
461        cd $(top_builddir) && $(SHELL) ./config.status $@
462MSVisualStudio/v14/nosparse/config.h: $(top_builddir)/config.status $(top_srcdir)/MSVisualStudio/v14/nosparse/config.h.in
463        cd $(top_builddir) && $(SHELL) ./config.status $@
464MSVisualStudio/v14/x64/sparse/config.h: $(top_builddir)/config.status $(top_srcdir)/MSVisualStudio/v14/x64/sparse/config.h.in
465        cd $(top_builddir) && $(SHELL) ./config.status $@
466MSVisualStudio/v14/x64/nosparse/config.h: $(top_builddir)/config.status $(top_srcdir)/MSVisualStudio/v14/x64/nosparse/config.h.in
467        cd $(top_builddir) && $(SHELL) ./config.status $@
468adolc.spec: $(top_builddir)/config.status $(srcdir)/adolc.spec.in
469        cd $(top_builddir) && $(SHELL) ./config.status $@
470adolclib.pc: $(top_builddir)/config.status $(srcdir)/adolclib.pc.in
471        cd $(top_builddir) && $(SHELL) ./config.status $@
472
473mostlyclean-libtool:
474        -rm -f *.lo
475
476clean-libtool:
477        -rm -rf .libs _libs
478
479distclean-libtool:
480        -rm -f libtool config.lt
481install-pkgconfigDATA: $(pkgconfig_DATA)
482        @$(NORMAL_INSTALL)
483        @list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \
484        if test -n "$$list"; then \
485          echo " $(MKDIR_P) '$(DESTDIR)$(pkgconfigdir)'"; \
486          $(MKDIR_P) "$(DESTDIR)$(pkgconfigdir)" || exit 1; \
487        fi; \
488        for p in $$list; do \
489          if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
490          echo "$$d$$p"; \
491        done | $(am__base_list) | \
492        while read files; do \
493          echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pkgconfigdir)'"; \
494          $(INSTALL_DATA) $$files "$(DESTDIR)$(pkgconfigdir)" || exit $$?; \
495        done
496
497uninstall-pkgconfigDATA:
498        @$(NORMAL_UNINSTALL)
499        @list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \
500        files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
501        dir='$(DESTDIR)$(pkgconfigdir)'; $(am__uninstall_files_from_dir)
502
503# This directory's subdirectories are mostly independent; you can cd
504# into them and run 'make' without going through this Makefile.
505# To change the values of 'make' variables: instead of editing Makefiles,
506# (1) if the variable is set in 'config.status', edit 'config.status'
507#     (which will cause the Makefiles to be regenerated when you run 'make');
508# (2) otherwise, pass the desired values on the 'make' command line.
509$(am__recursive_targets):
510        @fail=; \
511        if $(am__make_keepgoing); then \
512          failcom='fail=yes'; \
513        else \
514          failcom='exit 1'; \
515        fi; \
516        dot_seen=no; \
517        target=`echo $@ | sed s/-recursive//`; \
518        case "$@" in \
519          distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
520          *) list='$(SUBDIRS)' ;; \
521        esac; \
522        for subdir in $$list; do \
523          echo "Making $$target in $$subdir"; \
524          if test "$$subdir" = "."; then \
525            dot_seen=yes; \
526            local_target="$$target-am"; \
527          else \
528            local_target="$$target"; \
529          fi; \
530          ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
531          || eval $$failcom; \
532        done; \
533        if test "$$dot_seen" = "no"; then \
534          $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
535        fi; test -z "$$fail"
536
537ID: $(am__tagged_files)
538        $(am__define_uniq_tagged_files); mkid -fID $$unique
539tags: tags-recursive
540TAGS: tags
541
542tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
543        set x; \
544        here=`pwd`; \
545        if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
546          include_option=--etags-include; \
547          empty_fix=.; \
548        else \
549          include_option=--include; \
550          empty_fix=; \
551        fi; \
552        list='$(SUBDIRS)'; for subdir in $$list; do \
553          if test "$$subdir" = .; then :; else \
554            test ! -f $$subdir/TAGS || \
555              set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
556          fi; \
557        done; \
558        $(am__define_uniq_tagged_files); \
559        shift; \
560        if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
561          test -n "$$unique" || unique=$$empty_fix; \
562          if test $$# -gt 0; then \
563            $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
564              "$$@" $$unique; \
565          else \
566            $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
567              $$unique; \
568          fi; \
569        fi
570ctags: ctags-recursive
571
572CTAGS: ctags
573ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
574        $(am__define_uniq_tagged_files); \
575        test -z "$(CTAGS_ARGS)$$unique" \
576          || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
577             $$unique
578
579GTAGS:
580        here=`$(am__cd) $(top_builddir) && pwd` \
581          && $(am__cd) $(top_srcdir) \
582          && gtags -i $(GTAGS_ARGS) "$$here"
583cscope: cscope.files
584        test ! -s cscope.files \
585          || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS)
586clean-cscope:
587        -rm -f cscope.files
588cscope.files: clean-cscope cscopelist
589cscopelist: cscopelist-recursive
590
591cscopelist-am: $(am__tagged_files)
592        list='$(am__tagged_files)'; \
593        case "$(srcdir)" in \
594          [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
595          *) sdir=$(subdir)/$(srcdir) ;; \
596        esac; \
597        for i in $$list; do \
598          if test -f "$$i"; then \
599            echo "$(subdir)/$$i"; \
600          else \
601            echo "$$sdir/$$i"; \
602          fi; \
603        done >> $(top_builddir)/cscope.files
604
605distclean-tags:
606        -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
607        -rm -f cscope.out cscope.in.out cscope.po.out cscope.files
608
609distdir: $(DISTFILES)
610        $(am__remove_distdir)
611        test -d "$(distdir)" || mkdir "$(distdir)"
612        @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
613        topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
614        list='$(DISTFILES)'; \
615          dist_files=`for file in $$list; do echo $$file; done | \
616          sed -e "s|^$$srcdirstrip/||;t" \
617              -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
618        case $$dist_files in \
619          */*) $(MKDIR_P) `echo "$$dist_files" | \
620                           sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
621                           sort -u` ;; \
622        esac; \
623        for file in $$dist_files; do \
624          if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
625          if test -d $$d/$$file; then \
626            dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
627            if test -d "$(distdir)/$$file"; then \
628              find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
629            fi; \
630            if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
631              cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
632              find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
633            fi; \
634            cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
635          else \
636            test -f "$(distdir)/$$file" \
637            || cp -p $$d/$$file "$(distdir)/$$file" \
638            || exit 1; \
639          fi; \
640        done
641        @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
642          if test "$$subdir" = .; then :; else \
643            $(am__make_dryrun) \
644              || test -d "$(distdir)/$$subdir" \
645              || $(MKDIR_P) "$(distdir)/$$subdir" \
646              || exit 1; \
647            dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
648            $(am__relativize); \
649            new_distdir=$$reldir; \
650            dir1=$$subdir; dir2="$(top_distdir)"; \
651            $(am__relativize); \
652            new_top_distdir=$$reldir; \
653            echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
654            echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
655            ($(am__cd) $$subdir && \
656              $(MAKE) $(AM_MAKEFLAGS) \
657                top_distdir="$$new_top_distdir" \
658                distdir="$$new_distdir" \
659                am__remove_distdir=: \
660                am__skip_length_check=: \
661                am__skip_mode_fix=: \
662                distdir) \
663              || exit 1; \
664          fi; \
665        done
666        -test -n "$(am__skip_mode_fix)" \
667        || find "$(distdir)" -type d ! -perm -755 \
668                -exec chmod u+rwx,go+rx {} \; -o \
669          ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
670          ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
671          ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
672        || chmod -R a+r "$(distdir)"
673dist-gzip: distdir
674        tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
675        $(am__post_remove_distdir)
676dist-bzip2: distdir
677        tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2
678        $(am__post_remove_distdir)
679
680dist-lzip: distdir
681        tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz
682        $(am__post_remove_distdir)
683
684dist-xz: distdir
685        tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz
686        $(am__post_remove_distdir)
687
688dist-tarZ: distdir
689        tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
690        $(am__post_remove_distdir)
691
692dist-shar: distdir
693        shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
694        $(am__post_remove_distdir)
695
696dist-zip: distdir
697        -rm -f $(distdir).zip
698        zip -rq $(distdir).zip $(distdir)
699        $(am__post_remove_distdir)
700
701dist dist-all:
702        $(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:'
703        $(am__post_remove_distdir)
704
705# This target untars the dist file and tries a VPATH configuration.  Then
706# it guarantees that the distribution is self-contained by making another
707# tarfile.
708distcheck: dist
709        case '$(DIST_ARCHIVES)' in \
710        *.tar.gz*) \
711          GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\
712        *.tar.bz2*) \
713          bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
714        *.tar.lz*) \
715          lzip -dc $(distdir).tar.lz | $(am__untar) ;;\
716        *.tar.xz*) \
717          xz -dc $(distdir).tar.xz | $(am__untar) ;;\
718        *.tar.Z*) \
719          uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
720        *.shar.gz*) \
721          GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\
722        *.zip*) \
723          unzip $(distdir).zip ;;\
724        esac
725        chmod -R a-w $(distdir)
726        chmod u+w $(distdir)
727        mkdir $(distdir)/_build $(distdir)/_inst
728        chmod a-w $(distdir)
729        test -d $(distdir)/_build || exit 0; \
730        dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
731          && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
732          && am__cwd=`pwd` \
733          && $(am__cd) $(distdir)/_build \
734          && ../configure --srcdir=.. --prefix="$$dc_install_base" \
735            $(AM_DISTCHECK_CONFIGURE_FLAGS) \
736            $(DISTCHECK_CONFIGURE_FLAGS) \
737          && $(MAKE) $(AM_MAKEFLAGS) \
738          && $(MAKE) $(AM_MAKEFLAGS) dvi \
739          && $(MAKE) $(AM_MAKEFLAGS) check \
740          && $(MAKE) $(AM_MAKEFLAGS) install \
741          && $(MAKE) $(AM_MAKEFLAGS) installcheck \
742          && $(MAKE) $(AM_MAKEFLAGS) uninstall \
743          && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
744                distuninstallcheck \
745          && chmod -R a-w "$$dc_install_base" \
746          && ({ \
747               (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
748               && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
749               && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
750               && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
751                    distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
752              } || { rm -rf "$$dc_destdir"; exit 1; }) \
753          && rm -rf "$$dc_destdir" \
754          && $(MAKE) $(AM_MAKEFLAGS) dist \
755          && rm -rf $(DIST_ARCHIVES) \
756          && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
757          && cd "$$am__cwd" \
758          || exit 1
759        $(am__post_remove_distdir)
760        @(echo "$(distdir) archives ready for distribution: "; \
761          list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
762          sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
763distuninstallcheck:
764        @test -n '$(distuninstallcheck_dir)' || { \
765          echo 'ERROR: trying to run $@ with an empty' \
766               '$$(distuninstallcheck_dir)' >&2; \
767          exit 1; \
768        }; \
769        $(am__cd) '$(distuninstallcheck_dir)' || { \
770          echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \
771          exit 1; \
772        }; \
773        test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \
774           || { echo "ERROR: files left after uninstall:" ; \
775                if test -n "$(DESTDIR)"; then \
776                  echo "  (check DESTDIR support)"; \
777                fi ; \
778                $(distuninstallcheck_listfiles) ; \
779                exit 1; } >&2
780distcleancheck: distclean
781        @if test '$(srcdir)' = . ; then \
782          echo "ERROR: distcleancheck can only run from a VPATH build" ; \
783          exit 1 ; \
784        fi
785        @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
786          || { echo "ERROR: files left in build directory after distclean:" ; \
787               $(distcleancheck_listfiles) ; \
788               exit 1; } >&2
789check-am: all-am
790check: check-recursive
791all-am: Makefile $(DATA)
792installdirs: installdirs-recursive
793installdirs-am:
794        for dir in "$(DESTDIR)$(pkgconfigdir)"; do \
795          test -z "$$dir" || $(MKDIR_P) "$$dir"; \
796        done
797install: install-recursive
798install-exec: install-exec-recursive
799install-data: install-data-recursive
800uninstall: uninstall-recursive
801
802install-am: all-am
803        @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
804
805installcheck: installcheck-recursive
806install-strip:
807        if test -z '$(STRIP)'; then \
808          $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
809            install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
810              install; \
811        else \
812          $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
813            install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
814            "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
815        fi
816mostlyclean-generic:
817
818clean-generic:
819
820distclean-generic:
821        -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
822        -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
823
824maintainer-clean-generic:
825        @echo "This command is intended for maintainers to use"
826        @echo "it deletes files that may require special tools to rebuild."
827clean: clean-recursive
828
829clean-am: clean-generic clean-libtool mostlyclean-am
830
831distclean: distclean-recursive
832        -rm -f $(am__CONFIG_DISTCLEAN_FILES)
833        -rm -f Makefile
834distclean-am: clean-am distclean-generic distclean-libtool \
835        distclean-local distclean-tags
836
837dvi: dvi-recursive
838
839dvi-am:
840
841html: html-recursive
842
843html-am:
844
845info: info-recursive
846
847info-am:
848
849install-data-am: install-pkgconfigDATA
850
851install-dvi: install-dvi-recursive
852
853install-dvi-am:
854
855install-exec-am:
856
857install-html: install-html-recursive
858
859install-html-am:
860
861install-info: install-info-recursive
862
863install-info-am:
864
865install-man:
866
867install-pdf: install-pdf-recursive
868
869install-pdf-am:
870
871install-ps: install-ps-recursive
872
873install-ps-am:
874
875installcheck-am:
876
877maintainer-clean: maintainer-clean-recursive
878        -rm -f $(am__CONFIG_DISTCLEAN_FILES)
879        -rm -rf $(top_srcdir)/autom4te.cache
880        -rm -f Makefile
881maintainer-clean-am: distclean-am maintainer-clean-generic
882
883mostlyclean: mostlyclean-recursive
884
885mostlyclean-am: mostlyclean-generic mostlyclean-libtool
886
887pdf: pdf-recursive
888
889pdf-am:
890
891ps: ps-recursive
892
893ps-am:
894
895uninstall-am: uninstall-pkgconfigDATA
896
897.MAKE: $(am__recursive_targets) install-am install-strip
898
899.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \
900        am--refresh check check-am clean clean-cscope clean-generic \
901        clean-libtool cscope cscopelist-am ctags ctags-am dist \
902        dist-all dist-bzip2 dist-gzip dist-lzip dist-shar dist-tarZ \
903        dist-xz dist-zip distcheck distclean distclean-generic \
904        distclean-libtool distclean-local distclean-tags \
905        distcleancheck distdir distuninstallcheck dvi dvi-am html \
906        html-am info info-am install install-am install-data \
907        install-data-am install-dvi install-dvi-am install-exec \
908        install-exec-am install-html install-html-am install-info \
909        install-info-am install-man install-pdf install-pdf-am \
910        install-pkgconfigDATA install-ps install-ps-am install-strip \
911        installcheck installcheck-am installdirs installdirs-am \
912        maintainer-clean maintainer-clean-generic mostlyclean \
913        mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
914        tags tags-am uninstall uninstall-am uninstall-pkgconfigDATA
915
916
917@adolclib@.pc: adolclib.pc
918        mv $< $@
919
920test: all
921        cd ADOL-C; $(MAKE) test
922
923distclean-local:
924        rm -f @adolclib@.pc
925
926.PHONY: test
927
928# Tell versions [3.59,3.63) of GNU make to not export all variables.
929# Otherwise a system limit (for SysV at least) may be exceeded.
930.NOEXPORT:
Note: See TracBrowser for help on using the repository browser.