source: trunk/Makefile.in @ 517

Last change on this file since 517 was 517, checked in by kulshres, 5 years ago

regenerate files

Signed-off-by: Kshitij Kulshreshtha <kshitij@…>

File size: 30.3 KB
Line 
1# Makefile.in generated by automake 1.13.4 from Makefile.am.
2# @configure_input@
3
4# Copyright (C) 1994-2013 Free Software Foundation, Inc.
5
6# This Makefile.in is free software; the Free Software Foundation
7# gives unlimited permission to copy and/or distribute it,
8# with or without modifications, as long as this notice is preserved.
9
10# This program is distributed in the hope that it will be useful,
11# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
12# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
13# PARTICULAR PURPOSE.
14
15@SET_MAKE@
16
17##############################################################################
18##############################################################################
19
20VPATH = @srcdir@
21am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
22am__make_running_with_option = \
23  case $${target_option-} in \
24      ?) ;; \
25      *) echo "am__make_running_with_option: internal error: invalid" \
26              "target option '$${target_option-}' specified" >&2; \
27         exit 1;; \
28  esac; \
29  has_opt=no; \
30  sane_makeflags=$$MAKEFLAGS; \
31  if $(am__is_gnu_make); then \
32    sane_makeflags=$$MFLAGS; \
33  else \
34    case $$MAKEFLAGS in \
35      *\\[\ \   ]*) \
36        bs=\\; \
37        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
38          | sed "s/$$bs$$bs[$$bs $$bs   ]*//g"`;; \
39    esac; \
40  fi; \
41  skip_next=no; \
42  strip_trailopt () \
43  { \
44    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
45  }; \
46  for flg in $$sane_makeflags; do \
47    test $$skip_next = yes && { skip_next=no; continue; }; \
48    case $$flg in \
49      *=*|--*) continue;; \
50        -*I) strip_trailopt 'I'; skip_next=yes;; \
51      -*I?*) strip_trailopt 'I';; \
52        -*O) strip_trailopt 'O'; skip_next=yes;; \
53      -*O?*) strip_trailopt 'O';; \
54        -*l) strip_trailopt 'l'; skip_next=yes;; \
55      -*l?*) strip_trailopt 'l';; \
56      -[dEDm]) skip_next=yes;; \
57      -[JT]) skip_next=yes;; \
58    esac; \
59    case $$flg in \
60      *$$target_option*) has_opt=yes; break;; \
61    esac; \
62  done; \
63  test $$has_opt = yes
64am__make_dryrun = (target_option=n; $(am__make_running_with_option))
65am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
66pkgdatadir = $(datadir)/@PACKAGE@
67pkgincludedir = $(includedir)/@PACKAGE@
68pkglibdir = $(libdir)/@PACKAGE@
69pkglibexecdir = $(libexecdir)/@PACKAGE@
70am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
71install_sh_DATA = $(install_sh) -c -m 644
72install_sh_PROGRAM = $(install_sh) -c
73install_sh_SCRIPT = $(install_sh) -c
74INSTALL_HEADER = $(INSTALL_DATA)
75transform = $(program_transform_name)
76NORMAL_INSTALL = :
77PRE_INSTALL = :
78POST_INSTALL = :
79NORMAL_UNINSTALL = :
80PRE_UNINSTALL = :
81POST_UNINSTALL = :
82build_triplet = @build@
83host_triplet = @host@
84subdir = .
85DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am \
86        $(top_srcdir)/configure $(am__configure_deps) \
87        $(top_srcdir)/ADOL-C/doc/version.tex.in \
88        $(top_srcdir)/MSVisualStudio/v10/sparse/config.h.in \
89        $(top_srcdir)/MSVisualStudio/v10/nosparse/config.h.in \
90        $(top_srcdir)/MSVisualStudio/v10/x64/sparse/config.h.in \
91        $(top_srcdir)/MSVisualStudio/v10/x64/nosparse/config.h.in \
92        $(srcdir)/adolc.spec.in $(srcdir)/adolclib.pc.in AUTHORS \
93        ChangeLog INSTALL NEWS README TODO autoconf/config.guess \
94        autoconf/config.sub autoconf/depcomp autoconf/install-sh \
95        autoconf/missing autoconf/ltmain.sh \
96        $(top_srcdir)/autoconf/config.guess \
97        $(top_srcdir)/autoconf/config.sub \
98        $(top_srcdir)/autoconf/install-sh \
99        $(top_srcdir)/autoconf/ltmain.sh \
100        $(top_srcdir)/autoconf/missing
101ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
102am__aclocal_m4_deps = $(top_srcdir)/autoconf/acx_builtin.m4 \
103        $(top_srcdir)/autoconf/ampi.m4 \
104        $(top_srcdir)/autoconf/colpack.m4 \
105        $(top_srcdir)/autoconf/libtool.m4 \
106        $(top_srcdir)/autoconf/ltoptions.m4 \
107        $(top_srcdir)/autoconf/ltsugar.m4 \
108        $(top_srcdir)/autoconf/ltversion.m4 \
109        $(top_srcdir)/autoconf/lt~obsolete.m4 \
110        $(top_srcdir)/autoconf/mpi.m4 \
111        $(top_srcdir)/autoconf/stdcxx_11.m4 $(top_srcdir)/configure.ac
112am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
113        $(ACLOCAL_M4)
114am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
115 configure.lineno config.status.lineno
116mkinstalldirs = $(install_sh) -d
117CONFIG_HEADER = $(top_builddir)/ADOL-C/src/config.h
118CONFIG_CLEAN_FILES = ADOL-C/doc/version.tex \
119        MSVisualStudio/v10/sparse/config.h \
120        MSVisualStudio/v10/nosparse/config.h \
121        MSVisualStudio/v10/x64/sparse/config.h \
122        MSVisualStudio/v10/x64/nosparse/config.h adolc.spec \
123        adolclib.pc
124CONFIG_CLEAN_VPATH_FILES =
125AM_V_P = $(am__v_P_@AM_V@)
126am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
127am__v_P_0 = false
128am__v_P_1 = :
129AM_V_GEN = $(am__v_GEN_@AM_V@)
130am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
131am__v_GEN_0 = @echo "  GEN     " $@;
132am__v_GEN_1 =
133AM_V_at = $(am__v_at_@AM_V@)
134am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
135am__v_at_0 = @
136am__v_at_1 =
137SOURCES =
138DIST_SOURCES =
139RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
140        ctags-recursive dvi-recursive html-recursive info-recursive \
141        install-data-recursive install-dvi-recursive \
142        install-exec-recursive install-html-recursive \
143        install-info-recursive install-pdf-recursive \
144        install-ps-recursive install-recursive installcheck-recursive \
145        installdirs-recursive pdf-recursive ps-recursive \
146        tags-recursive uninstall-recursive
147am__can_run_installinfo = \
148  case $$AM_UPDATE_INFO_DIR in \
149    n|no|NO) false;; \
150    *) (install-info --version) >/dev/null 2>&1;; \
151  esac
152am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
153am__vpath_adj = case $$p in \
154    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
155    *) f=$$p;; \
156  esac;
157am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
158am__install_max = 40
159am__nobase_strip_setup = \
160  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
161am__nobase_strip = \
162  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
163am__nobase_list = $(am__nobase_strip_setup); \
164  for p in $$list; do echo "$$p $$p"; done | \
165  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
166  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
167    if (++n[$$2] == $(am__install_max)) \
168      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
169    END { for (dir in files) print dir, files[dir] }'
170am__base_list = \
171  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
172  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
173am__uninstall_files_from_dir = { \
174  test -z "$$files" \
175    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
176    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
177         $(am__cd) "$$dir" && rm -f $$files; }; \
178  }
179am__installdirs = "$(DESTDIR)$(pkgconfigdir)"
180DATA = $(pkgconfig_DATA)
181RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
182  distclean-recursive maintainer-clean-recursive
183am__recursive_targets = \
184  $(RECURSIVE_TARGETS) \
185  $(RECURSIVE_CLEAN_TARGETS) \
186  $(am__extra_recursive_targets)
187AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
188        cscope distdir dist dist-all distcheck
189am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
190# Read a list of newline-separated strings from the standard input,
191# and print each of them once, without duplicates.  Input order is
192# *not* preserved.
193am__uniquify_input = $(AWK) '\
194  BEGIN { nonempty = 0; } \
195  { items[$$0] = 1; nonempty = 1; } \
196  END { if (nonempty) { for (i in items) print i; }; } \
197'
198# Make sure the list of sources is unique.  This is necessary because,
199# e.g., the same source file might be shared among _SOURCES variables
200# for different programs/libraries.
201am__define_uniq_tagged_files = \
202  list='$(am__tagged_files)'; \
203  unique=`for i in $$list; do \
204    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
205  done | $(am__uniquify_input)`
206ETAGS = etags
207CTAGS = ctags
208CSCOPE = cscope
209DIST_SUBDIRS = $(SUBDIRS)
210DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
211distdir = $(PACKAGE)-$(VERSION)
212top_distdir = $(distdir)
213am__remove_distdir = \
214  if test -d "$(distdir)"; then \
215    find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
216      && rm -rf "$(distdir)" \
217      || { sleep 5 && rm -rf "$(distdir)"; }; \
218  else :; fi
219am__post_remove_distdir = $(am__remove_distdir)
220am__relativize = \
221  dir0=`pwd`; \
222  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
223  sed_rest='s,^[^/]*/*,,'; \
224  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
225  sed_butlast='s,/*[^/]*$$,,'; \
226  while test -n "$$dir1"; do \
227    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
228    if test "$$first" != "."; then \
229      if test "$$first" = ".."; then \
230        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
231        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
232      else \
233        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
234        if test "$$first2" = "$$first"; then \
235          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
236        else \
237          dir2="../$$dir2"; \
238        fi; \
239        dir0="$$dir0"/"$$first"; \
240      fi; \
241    fi; \
242    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
243  done; \
244  reldir="$$dir2"
245DIST_ARCHIVES = $(distdir).tar.gz $(distdir).tar.bz2
246GZIP_ENV = --best
247DIST_TARGETS = dist-bzip2 dist-gzip
248distuninstallcheck_listfiles = find . -type f -print
249am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \
250  | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'
251distcleancheck_listfiles = find . -type f -print
252ACLOCAL = @ACLOCAL@
253ADOLC_PATCHLEVEL = @ADOLC_PATCHLEVEL@
254ADOLC_SUBVERSION = @ADOLC_SUBVERSION@
255ADOLC_VERSION = @ADOLC_VERSION@
256ADVBRANCH = @ADVBRANCH@
257AMTAR = @AMTAR@
258AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
259AR = @AR@
260AS = @AS@
261ATRIG_ERF = @ATRIG_ERF@
262AUTOCONF = @AUTOCONF@
263AUTOHEADER = @AUTOHEADER@
264AUTOMAKE = @AUTOMAKE@
265AWK = @AWK@
266CC = @CC@
267CCDEPMODE = @CCDEPMODE@
268CFLAGS = @CFLAGS@
269CPP = @CPP@
270CPPFLAGS = @CPPFLAGS@
271CXX = @CXX@
272CXXCPP = @CXXCPP@
273CXXDEPMODE = @CXXDEPMODE@
274CXXFLAGS = @CXXFLAGS@
275CYGPATH_W = @CYGPATH_W@
276DEFS = @DEFS@
277DEPDIR = @DEPDIR@
278DLLTOOL = @DLLTOOL@
279DSYMUTIL = @DSYMUTIL@
280DUMPBIN = @DUMPBIN@
281ECHO_C = @ECHO_C@
282ECHO_N = @ECHO_N@
283ECHO_T = @ECHO_T@
284EGREP = @EGREP@
285EXEEXT = @EXEEXT@
286FGREP = @FGREP@
287GREP = @GREP@
288HAVE_CXX11 = @HAVE_CXX11@
289INSTALL = @INSTALL@
290INSTALL_DATA = @INSTALL_DATA@
291INSTALL_PROGRAM = @INSTALL_PROGRAM@
292INSTALL_SCRIPT = @INSTALL_SCRIPT@
293INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
294LD = @LD@
295LDFLAGS = @LDFLAGS@
296LIBOBJS = @LIBOBJS@
297LIBS = @LIBS@
298LIBTOOL = @LIBTOOL@
299LIPO = @LIPO@
300LN_S = @LN_S@
301LTLIBOBJS = @LTLIBOBJS@
302MAINT = @MAINT@
303MAKEINFO = @MAKEINFO@
304MANIFEST_TOOL = @MANIFEST_TOOL@
305MKDIR_P = @MKDIR_P@
306NM = @NM@
307NMEDIT = @NMEDIT@
308OBJDUMP = @OBJDUMP@
309OBJEXT = @OBJEXT@
310OTOOL = @OTOOL@
311OTOOL64 = @OTOOL64@
312PACKAGE = @PACKAGE@
313PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
314PACKAGE_NAME = @PACKAGE_NAME@
315PACKAGE_STRING = @PACKAGE_STRING@
316PACKAGE_TARNAME = @PACKAGE_TARNAME@
317PACKAGE_URL = @PACKAGE_URL@
318PACKAGE_VERSION = @PACKAGE_VERSION@
319PATH_SEPARATOR = @PATH_SEPARATOR@
320RANLIB = @RANLIB@
321REAL_TYPE = @REAL_TYPE@
322SED = @SED@
323SET_MAKE = @SET_MAKE@
324SHELL = @SHELL@
325STRIP = @STRIP@
326UINT_TYPE = @UINT_TYPE@
327VERSION = @VERSION@
328_lib = @_lib@
329abs_builddir = @abs_builddir@
330abs_srcdir = @abs_srcdir@
331abs_top_builddir = @abs_top_builddir@
332abs_top_srcdir = @abs_top_srcdir@
333ac_adolc_cflags = @ac_adolc_cflags@
334ac_adolc_cxxflags = @ac_adolc_cxxflags@
335ac_aux_dir = @ac_aux_dir@
336ac_ct_AR = @ac_ct_AR@
337ac_ct_CC = @ac_ct_CC@
338ac_ct_CXX = @ac_ct_CXX@
339ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
340adolclib = @adolclib@
341am__include = @am__include@
342am__leading_dot = @am__leading_dot@
343am__quote = @am__quote@
344am__tar = @am__tar@
345am__untar = @am__untar@
346bindir = @bindir@
347build = @build@
348build_alias = @build_alias@
349build_cpu = @build_cpu@
350build_os = @build_os@
351build_vendor = @build_vendor@
352builddir = @builddir@
353datadir = @datadir@
354datarootdir = @datarootdir@
355docdir = @docdir@
356dvidir = @dvidir@
357exec_prefix = @exec_prefix@
358host = @host@
359host_alias = @host_alias@
360host_cpu = @host_cpu@
361host_os = @host_os@
362host_vendor = @host_vendor@
363htmldir = @htmldir@
364includedir = @includedir@
365infodir = @infodir@
366install_sh = @install_sh@
367libdir = @libdir@
368libexecdir = @libexecdir@
369localedir = @localedir@
370localstatedir = @localstatedir@
371mandir = @mandir@
372mkdir_p = @mkdir_p@
373oldincludedir = @oldincludedir@
374pdfdir = @pdfdir@
375prefix = @prefix@
376program_transform_name = @program_transform_name@
377psdir = @psdir@
378saveCC = @saveCC@
379saveCXX = @saveCXX@
380sbindir = @sbindir@
381sharedstatedir = @sharedstatedir@
382srcdir = @srcdir@
383sysconfdir = @sysconfdir@
384target_alias = @target_alias@
385top_build_prefix = @top_build_prefix@
386top_builddir = @top_builddir@
387top_srcdir = @top_srcdir@
388ACLOCAL_AMFLAGS = -I autoconf
389AUTOMAKE_OPTIONS = foreign
390EXTRA_DIST = TODO BUGS LICENSE update_versions.sh \
391                       ADOL-C/doc/version.tex.in ADOL-C/doc/version.tex \
392                       ADOL-C/doc/adolc-manual.pdf ADOL-C/doc/adolc-manual.ps \
393                       ADOL-C/doc/adolc-manual.tex ADOL-C/doc/short_ref.pdf \
394                       ADOL-C/doc/short_ref.ps ADOL-C/doc/short_ref.tex \
395                       ADOL-C/doc/multiplexed.pdf ADOL-C/doc/multiplexed.eps \
396                       ADOL-C/doc/tapeadv.pdf ADOL-C/doc/tapeadv.eps \
397                       ADOL-C/doc/tapebasic.pdf ADOL-C/doc/tapebasic.eps \
398                       ADOL-C/doc/tap_point.pdf ADOL-C/doc/tap_point.eps \
399                       MSVisualStudio/v10/adolc.sln MSVisualStudio/v10/adolc.vcxproj \
400                       MSVisualStudio/v10/ColPack_Readme_VC++.txt \
401                       MSVisualStudio/v10/ColPack.vcxproj \
402                       MSVisualStudio/v10/sparse/config.h.in MSVisualStudio/v10/nosparse/config.h.in \
403                       MSVisualStudio/v10/x64/sparse/config.h.in MSVisualStudio/v10/x64/nosparse/config.h.in \
404                       MSVisualStudio/v10/sparse/config.h MSVisualStudio/v10/nosparse/config.h \
405                       MSVisualStudio/v10/x64/sparse/config.h MSVisualStudio/v10/x64/nosparse/config.h \
406                       MSVisualStudio/v10/Readme_VC++.txt \
407                       MSVisualStudio/v10/installer.sh \
408                       adolc.spec.in adolc.spec \
409                       update_versions.sh
410
411SUBDIRS = ADOL-C
412
413# install pkg-config information
414pkgconfigdir = $(libdir)/pkgconfig
415pkgconfig_DATA = @adolclib@.pc
416all: all-recursive
417
418.SUFFIXES:
419am--refresh: Makefile
420        @:
421$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
422        @for dep in $?; do \
423          case '$(am__configure_deps)' in \
424            *$$dep*) \
425              echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \
426              $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \
427                && exit 0; \
428              exit 1;; \
429          esac; \
430        done; \
431        echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
432        $(am__cd) $(top_srcdir) && \
433          $(AUTOMAKE) --foreign Makefile
434.PRECIOUS: Makefile
435Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
436        @case '$?' in \
437          *config.status*) \
438            echo ' $(SHELL) ./config.status'; \
439            $(SHELL) ./config.status;; \
440          *) \
441            echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
442            cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
443        esac;
444
445$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
446        $(SHELL) ./config.status --recheck
447
448$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
449        $(am__cd) $(srcdir) && $(AUTOCONF)
450$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
451        $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
452$(am__aclocal_m4_deps):
453ADOL-C/doc/version.tex: $(top_builddir)/config.status $(top_srcdir)/ADOL-C/doc/version.tex.in
454        cd $(top_builddir) && $(SHELL) ./config.status $@
455MSVisualStudio/v10/sparse/config.h: $(top_builddir)/config.status $(top_srcdir)/MSVisualStudio/v10/sparse/config.h.in
456        cd $(top_builddir) && $(SHELL) ./config.status $@
457MSVisualStudio/v10/nosparse/config.h: $(top_builddir)/config.status $(top_srcdir)/MSVisualStudio/v10/nosparse/config.h.in
458        cd $(top_builddir) && $(SHELL) ./config.status $@
459MSVisualStudio/v10/x64/sparse/config.h: $(top_builddir)/config.status $(top_srcdir)/MSVisualStudio/v10/x64/sparse/config.h.in
460        cd $(top_builddir) && $(SHELL) ./config.status $@
461MSVisualStudio/v10/x64/nosparse/config.h: $(top_builddir)/config.status $(top_srcdir)/MSVisualStudio/v10/x64/nosparse/config.h.in
462        cd $(top_builddir) && $(SHELL) ./config.status $@
463adolc.spec: $(top_builddir)/config.status $(srcdir)/adolc.spec.in
464        cd $(top_builddir) && $(SHELL) ./config.status $@
465adolclib.pc: $(top_builddir)/config.status $(srcdir)/adolclib.pc.in
466        cd $(top_builddir) && $(SHELL) ./config.status $@
467
468mostlyclean-libtool:
469        -rm -f *.lo
470
471clean-libtool:
472        -rm -rf .libs _libs
473
474distclean-libtool:
475        -rm -f libtool config.lt
476install-pkgconfigDATA: $(pkgconfig_DATA)
477        @$(NORMAL_INSTALL)
478        @list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \
479        if test -n "$$list"; then \
480          echo " $(MKDIR_P) '$(DESTDIR)$(pkgconfigdir)'"; \
481          $(MKDIR_P) "$(DESTDIR)$(pkgconfigdir)" || exit 1; \
482        fi; \
483        for p in $$list; do \
484          if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
485          echo "$$d$$p"; \
486        done | $(am__base_list) | \
487        while read files; do \
488          echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pkgconfigdir)'"; \
489          $(INSTALL_DATA) $$files "$(DESTDIR)$(pkgconfigdir)" || exit $$?; \
490        done
491
492uninstall-pkgconfigDATA:
493        @$(NORMAL_UNINSTALL)
494        @list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \
495        files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
496        dir='$(DESTDIR)$(pkgconfigdir)'; $(am__uninstall_files_from_dir)
497
498# This directory's subdirectories are mostly independent; you can cd
499# into them and run 'make' without going through this Makefile.
500# To change the values of 'make' variables: instead of editing Makefiles,
501# (1) if the variable is set in 'config.status', edit 'config.status'
502#     (which will cause the Makefiles to be regenerated when you run 'make');
503# (2) otherwise, pass the desired values on the 'make' command line.
504$(am__recursive_targets):
505        @fail=; \
506        if $(am__make_keepgoing); then \
507          failcom='fail=yes'; \
508        else \
509          failcom='exit 1'; \
510        fi; \
511        dot_seen=no; \
512        target=`echo $@ | sed s/-recursive//`; \
513        case "$@" in \
514          distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
515          *) list='$(SUBDIRS)' ;; \
516        esac; \
517        for subdir in $$list; do \
518          echo "Making $$target in $$subdir"; \
519          if test "$$subdir" = "."; then \
520            dot_seen=yes; \
521            local_target="$$target-am"; \
522          else \
523            local_target="$$target"; \
524          fi; \
525          ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
526          || eval $$failcom; \
527        done; \
528        if test "$$dot_seen" = "no"; then \
529          $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
530        fi; test -z "$$fail"
531
532ID: $(am__tagged_files)
533        $(am__define_uniq_tagged_files); mkid -fID $$unique
534tags: tags-recursive
535TAGS: tags
536
537tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
538        set x; \
539        here=`pwd`; \
540        if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
541          include_option=--etags-include; \
542          empty_fix=.; \
543        else \
544          include_option=--include; \
545          empty_fix=; \
546        fi; \
547        list='$(SUBDIRS)'; for subdir in $$list; do \
548          if test "$$subdir" = .; then :; else \
549            test ! -f $$subdir/TAGS || \
550              set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
551          fi; \
552        done; \
553        $(am__define_uniq_tagged_files); \
554        shift; \
555        if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
556          test -n "$$unique" || unique=$$empty_fix; \
557          if test $$# -gt 0; then \
558            $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
559              "$$@" $$unique; \
560          else \
561            $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
562              $$unique; \
563          fi; \
564        fi
565ctags: ctags-recursive
566
567CTAGS: ctags
568ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
569        $(am__define_uniq_tagged_files); \
570        test -z "$(CTAGS_ARGS)$$unique" \
571          || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
572             $$unique
573
574GTAGS:
575        here=`$(am__cd) $(top_builddir) && pwd` \
576          && $(am__cd) $(top_srcdir) \
577          && gtags -i $(GTAGS_ARGS) "$$here"
578cscope: cscope.files
579        test ! -s cscope.files \
580          || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS)
581clean-cscope:
582        -rm -f cscope.files
583cscope.files: clean-cscope cscopelist
584cscopelist: cscopelist-recursive
585
586cscopelist-am: $(am__tagged_files)
587        list='$(am__tagged_files)'; \
588        case "$(srcdir)" in \
589          [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
590          *) sdir=$(subdir)/$(srcdir) ;; \
591        esac; \
592        for i in $$list; do \
593          if test -f "$$i"; then \
594            echo "$(subdir)/$$i"; \
595          else \
596            echo "$$sdir/$$i"; \
597          fi; \
598        done >> $(top_builddir)/cscope.files
599
600distclean-tags:
601        -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
602        -rm -f cscope.out cscope.in.out cscope.po.out cscope.files
603
604distdir: $(DISTFILES)
605        $(am__remove_distdir)
606        test -d "$(distdir)" || mkdir "$(distdir)"
607        @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
608        topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
609        list='$(DISTFILES)'; \
610          dist_files=`for file in $$list; do echo $$file; done | \
611          sed -e "s|^$$srcdirstrip/||;t" \
612              -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
613        case $$dist_files in \
614          */*) $(MKDIR_P) `echo "$$dist_files" | \
615                           sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
616                           sort -u` ;; \
617        esac; \
618        for file in $$dist_files; do \
619          if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
620          if test -d $$d/$$file; then \
621            dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
622            if test -d "$(distdir)/$$file"; then \
623              find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
624            fi; \
625            if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
626              cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
627              find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
628            fi; \
629            cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
630          else \
631            test -f "$(distdir)/$$file" \
632            || cp -p $$d/$$file "$(distdir)/$$file" \
633            || exit 1; \
634          fi; \
635        done
636        @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
637          if test "$$subdir" = .; then :; else \
638            $(am__make_dryrun) \
639              || test -d "$(distdir)/$$subdir" \
640              || $(MKDIR_P) "$(distdir)/$$subdir" \
641              || exit 1; \
642            dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
643            $(am__relativize); \
644            new_distdir=$$reldir; \
645            dir1=$$subdir; dir2="$(top_distdir)"; \
646            $(am__relativize); \
647            new_top_distdir=$$reldir; \
648            echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
649            echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
650            ($(am__cd) $$subdir && \
651              $(MAKE) $(AM_MAKEFLAGS) \
652                top_distdir="$$new_top_distdir" \
653                distdir="$$new_distdir" \
654                am__remove_distdir=: \
655                am__skip_length_check=: \
656                am__skip_mode_fix=: \
657                distdir) \
658              || exit 1; \
659          fi; \
660        done
661        -test -n "$(am__skip_mode_fix)" \
662        || find "$(distdir)" -type d ! -perm -755 \
663                -exec chmod u+rwx,go+rx {} \; -o \
664          ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
665          ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
666          ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
667        || chmod -R a+r "$(distdir)"
668dist-gzip: distdir
669        tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
670        $(am__post_remove_distdir)
671dist-bzip2: distdir
672        tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2
673        $(am__post_remove_distdir)
674
675dist-lzip: distdir
676        tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz
677        $(am__post_remove_distdir)
678
679dist-xz: distdir
680        tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz
681        $(am__post_remove_distdir)
682
683dist-tarZ: distdir
684        tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
685        $(am__post_remove_distdir)
686
687dist-shar: distdir
688        shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
689        $(am__post_remove_distdir)
690
691dist-zip: distdir
692        -rm -f $(distdir).zip
693        zip -rq $(distdir).zip $(distdir)
694        $(am__post_remove_distdir)
695
696dist dist-all:
697        $(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:'
698        $(am__post_remove_distdir)
699
700# This target untars the dist file and tries a VPATH configuration.  Then
701# it guarantees that the distribution is self-contained by making another
702# tarfile.
703distcheck: dist
704        case '$(DIST_ARCHIVES)' in \
705        *.tar.gz*) \
706          GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\
707        *.tar.bz2*) \
708          bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
709        *.tar.lz*) \
710          lzip -dc $(distdir).tar.lz | $(am__untar) ;;\
711        *.tar.xz*) \
712          xz -dc $(distdir).tar.xz | $(am__untar) ;;\
713        *.tar.Z*) \
714          uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
715        *.shar.gz*) \
716          GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\
717        *.zip*) \
718          unzip $(distdir).zip ;;\
719        esac
720        chmod -R a-w $(distdir)
721        chmod u+w $(distdir)
722        mkdir $(distdir)/_build $(distdir)/_inst
723        chmod a-w $(distdir)
724        test -d $(distdir)/_build || exit 0; \
725        dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
726          && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
727          && am__cwd=`pwd` \
728          && $(am__cd) $(distdir)/_build \
729          && ../configure --srcdir=.. --prefix="$$dc_install_base" \
730            $(AM_DISTCHECK_CONFIGURE_FLAGS) \
731            $(DISTCHECK_CONFIGURE_FLAGS) \
732          && $(MAKE) $(AM_MAKEFLAGS) \
733          && $(MAKE) $(AM_MAKEFLAGS) dvi \
734          && $(MAKE) $(AM_MAKEFLAGS) check \
735          && $(MAKE) $(AM_MAKEFLAGS) install \
736          && $(MAKE) $(AM_MAKEFLAGS) installcheck \
737          && $(MAKE) $(AM_MAKEFLAGS) uninstall \
738          && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
739                distuninstallcheck \
740          && chmod -R a-w "$$dc_install_base" \
741          && ({ \
742               (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
743               && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
744               && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
745               && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
746                    distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
747              } || { rm -rf "$$dc_destdir"; exit 1; }) \
748          && rm -rf "$$dc_destdir" \
749          && $(MAKE) $(AM_MAKEFLAGS) dist \
750          && rm -rf $(DIST_ARCHIVES) \
751          && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
752          && cd "$$am__cwd" \
753          || exit 1
754        $(am__post_remove_distdir)
755        @(echo "$(distdir) archives ready for distribution: "; \
756          list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
757          sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
758distuninstallcheck:
759        @test -n '$(distuninstallcheck_dir)' || { \
760          echo 'ERROR: trying to run $@ with an empty' \
761               '$$(distuninstallcheck_dir)' >&2; \
762          exit 1; \
763        }; \
764        $(am__cd) '$(distuninstallcheck_dir)' || { \
765          echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \
766          exit 1; \
767        }; \
768        test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \
769           || { echo "ERROR: files left after uninstall:" ; \
770                if test -n "$(DESTDIR)"; then \
771                  echo "  (check DESTDIR support)"; \
772                fi ; \
773                $(distuninstallcheck_listfiles) ; \
774                exit 1; } >&2
775distcleancheck: distclean
776        @if test '$(srcdir)' = . ; then \
777          echo "ERROR: distcleancheck can only run from a VPATH build" ; \
778          exit 1 ; \
779        fi
780        @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
781          || { echo "ERROR: files left in build directory after distclean:" ; \
782               $(distcleancheck_listfiles) ; \
783               exit 1; } >&2
784check-am: all-am
785check: check-recursive
786all-am: Makefile $(DATA)
787installdirs: installdirs-recursive
788installdirs-am:
789        for dir in "$(DESTDIR)$(pkgconfigdir)"; do \
790          test -z "$$dir" || $(MKDIR_P) "$$dir"; \
791        done
792install: install-recursive
793install-exec: install-exec-recursive
794install-data: install-data-recursive
795uninstall: uninstall-recursive
796
797install-am: all-am
798        @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
799
800installcheck: installcheck-recursive
801install-strip:
802        if test -z '$(STRIP)'; then \
803          $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
804            install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
805              install; \
806        else \
807          $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
808            install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
809            "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
810        fi
811mostlyclean-generic:
812
813clean-generic:
814
815distclean-generic:
816        -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
817        -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
818
819maintainer-clean-generic:
820        @echo "This command is intended for maintainers to use"
821        @echo "it deletes files that may require special tools to rebuild."
822clean: clean-recursive
823
824clean-am: clean-generic clean-libtool mostlyclean-am
825
826distclean: distclean-recursive
827        -rm -f $(am__CONFIG_DISTCLEAN_FILES)
828        -rm -f Makefile
829distclean-am: clean-am distclean-generic distclean-libtool \
830        distclean-tags
831
832dvi: dvi-recursive
833
834dvi-am:
835
836html: html-recursive
837
838html-am:
839
840info: info-recursive
841
842info-am:
843
844install-data-am: install-pkgconfigDATA
845
846install-dvi: install-dvi-recursive
847
848install-dvi-am:
849
850install-exec-am:
851
852install-html: install-html-recursive
853
854install-html-am:
855
856install-info: install-info-recursive
857
858install-info-am:
859
860install-man:
861
862install-pdf: install-pdf-recursive
863
864install-pdf-am:
865
866install-ps: install-ps-recursive
867
868install-ps-am:
869
870installcheck-am:
871
872maintainer-clean: maintainer-clean-recursive
873        -rm -f $(am__CONFIG_DISTCLEAN_FILES)
874        -rm -rf $(top_srcdir)/autom4te.cache
875        -rm -f Makefile
876maintainer-clean-am: distclean-am maintainer-clean-generic
877
878mostlyclean: mostlyclean-recursive
879
880mostlyclean-am: mostlyclean-generic mostlyclean-libtool
881
882pdf: pdf-recursive
883
884pdf-am:
885
886ps: ps-recursive
887
888ps-am:
889
890uninstall-am: uninstall-pkgconfigDATA
891
892.MAKE: $(am__recursive_targets) install-am install-strip
893
894.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \
895        am--refresh check check-am clean clean-cscope clean-generic \
896        clean-libtool cscope cscopelist-am ctags ctags-am dist \
897        dist-all dist-bzip2 dist-gzip dist-lzip dist-shar dist-tarZ \
898        dist-xz dist-zip distcheck distclean distclean-generic \
899        distclean-libtool distclean-tags distcleancheck distdir \
900        distuninstallcheck dvi dvi-am html html-am info info-am \
901        install install-am install-data install-data-am install-dvi \
902        install-dvi-am install-exec install-exec-am install-html \
903        install-html-am install-info install-info-am install-man \
904        install-pdf install-pdf-am install-pkgconfigDATA install-ps \
905        install-ps-am install-strip installcheck installcheck-am \
906        installdirs installdirs-am maintainer-clean \
907        maintainer-clean-generic mostlyclean mostlyclean-generic \
908        mostlyclean-libtool pdf pdf-am ps ps-am tags tags-am uninstall \
909        uninstall-am uninstall-pkgconfigDATA
910
911
912@adolclib@.pc: adolclib.pc
913        mv $< $@
914
915test: all
916        cd ADOL-C; $(MAKE) test
917
918.PHONY: test
919
920# Tell versions [3.59,3.63) of GNU make to not export all variables.
921# Otherwise a system limit (for SysV at least) may be exceeded.
922.NOEXPORT:
Note: See TracBrowser for help on using the repository browser.