source: trunk/Makefile.in @ 514

Last change on this file since 514 was 514, checked in by kulshres, 6 years ago

regenerate files

Signed-off-by: Kshitij Kulshreshtha <kshitij@…>

File size: 30.3 KB
Line 
1# Makefile.in generated by automake 1.13.4 from Makefile.am.
2# @configure_input@
3
4# Copyright (C) 1994-2013 Free Software Foundation, Inc.
5
6# This Makefile.in is free software; the Free Software Foundation
7# gives unlimited permission to copy and/or distribute it,
8# with or without modifications, as long as this notice is preserved.
9
10# This program is distributed in the hope that it will be useful,
11# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
12# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
13# PARTICULAR PURPOSE.
14
15@SET_MAKE@
16
17##############################################################################
18##############################################################################
19
20VPATH = @srcdir@
21am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
22am__make_running_with_option = \
23  case $${target_option-} in \
24      ?) ;; \
25      *) echo "am__make_running_with_option: internal error: invalid" \
26              "target option '$${target_option-}' specified" >&2; \
27         exit 1;; \
28  esac; \
29  has_opt=no; \
30  sane_makeflags=$$MAKEFLAGS; \
31  if $(am__is_gnu_make); then \
32    sane_makeflags=$$MFLAGS; \
33  else \
34    case $$MAKEFLAGS in \
35      *\\[\ \   ]*) \
36        bs=\\; \
37        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
38          | sed "s/$$bs$$bs[$$bs $$bs   ]*//g"`;; \
39    esac; \
40  fi; \
41  skip_next=no; \
42  strip_trailopt () \
43  { \
44    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
45  }; \
46  for flg in $$sane_makeflags; do \
47    test $$skip_next = yes && { skip_next=no; continue; }; \
48    case $$flg in \
49      *=*|--*) continue;; \
50        -*I) strip_trailopt 'I'; skip_next=yes;; \
51      -*I?*) strip_trailopt 'I';; \
52        -*O) strip_trailopt 'O'; skip_next=yes;; \
53      -*O?*) strip_trailopt 'O';; \
54        -*l) strip_trailopt 'l'; skip_next=yes;; \
55      -*l?*) strip_trailopt 'l';; \
56      -[dEDm]) skip_next=yes;; \
57      -[JT]) skip_next=yes;; \
58    esac; \
59    case $$flg in \
60      *$$target_option*) has_opt=yes; break;; \
61    esac; \
62  done; \
63  test $$has_opt = yes
64am__make_dryrun = (target_option=n; $(am__make_running_with_option))
65am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
66pkgdatadir = $(datadir)/@PACKAGE@
67pkgincludedir = $(includedir)/@PACKAGE@
68pkglibdir = $(libdir)/@PACKAGE@
69pkglibexecdir = $(libexecdir)/@PACKAGE@
70am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
71install_sh_DATA = $(install_sh) -c -m 644
72install_sh_PROGRAM = $(install_sh) -c
73install_sh_SCRIPT = $(install_sh) -c
74INSTALL_HEADER = $(INSTALL_DATA)
75transform = $(program_transform_name)
76NORMAL_INSTALL = :
77PRE_INSTALL = :
78POST_INSTALL = :
79NORMAL_UNINSTALL = :
80PRE_UNINSTALL = :
81POST_UNINSTALL = :
82build_triplet = @build@
83host_triplet = @host@
84subdir = .
85DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am \
86        $(top_srcdir)/configure $(am__configure_deps) \
87        $(top_srcdir)/ADOL-C/doc/version.tex.in \
88        $(top_srcdir)/MSVisualStudio/v10/sparse/config.h.in \
89        $(top_srcdir)/MSVisualStudio/v10/nosparse/config.h.in \
90        $(top_srcdir)/MSVisualStudio/v10/x64/sparse/config.h.in \
91        $(top_srcdir)/MSVisualStudio/v10/x64/nosparse/config.h.in \
92        $(srcdir)/adolc.spec.in $(srcdir)/adolclib.pc.in AUTHORS \
93        ChangeLog INSTALL NEWS README TODO autoconf/config.guess \
94        autoconf/config.sub autoconf/depcomp autoconf/install-sh \
95        autoconf/missing autoconf/ltmain.sh \
96        $(top_srcdir)/autoconf/config.guess \
97        $(top_srcdir)/autoconf/config.sub \
98        $(top_srcdir)/autoconf/install-sh \
99        $(top_srcdir)/autoconf/ltmain.sh \
100        $(top_srcdir)/autoconf/missing
101ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
102am__aclocal_m4_deps = $(top_srcdir)/autoconf/acx_builtin.m4 \
103        $(top_srcdir)/autoconf/ampi.m4 \
104        $(top_srcdir)/autoconf/colpack.m4 \
105        $(top_srcdir)/autoconf/libtool.m4 \
106        $(top_srcdir)/autoconf/ltoptions.m4 \
107        $(top_srcdir)/autoconf/ltsugar.m4 \
108        $(top_srcdir)/autoconf/ltversion.m4 \
109        $(top_srcdir)/autoconf/lt~obsolete.m4 \
110        $(top_srcdir)/autoconf/mpi.m4 $(top_srcdir)/configure.ac
111am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
112        $(ACLOCAL_M4)
113am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
114 configure.lineno config.status.lineno
115mkinstalldirs = $(install_sh) -d
116CONFIG_HEADER = $(top_builddir)/ADOL-C/src/config.h
117CONFIG_CLEAN_FILES = ADOL-C/doc/version.tex \
118        MSVisualStudio/v10/sparse/config.h \
119        MSVisualStudio/v10/nosparse/config.h \
120        MSVisualStudio/v10/x64/sparse/config.h \
121        MSVisualStudio/v10/x64/nosparse/config.h adolc.spec \
122        adolclib.pc
123CONFIG_CLEAN_VPATH_FILES =
124AM_V_P = $(am__v_P_@AM_V@)
125am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
126am__v_P_0 = false
127am__v_P_1 = :
128AM_V_GEN = $(am__v_GEN_@AM_V@)
129am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
130am__v_GEN_0 = @echo "  GEN     " $@;
131am__v_GEN_1 =
132AM_V_at = $(am__v_at_@AM_V@)
133am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
134am__v_at_0 = @
135am__v_at_1 =
136SOURCES =
137DIST_SOURCES =
138RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
139        ctags-recursive dvi-recursive html-recursive info-recursive \
140        install-data-recursive install-dvi-recursive \
141        install-exec-recursive install-html-recursive \
142        install-info-recursive install-pdf-recursive \
143        install-ps-recursive install-recursive installcheck-recursive \
144        installdirs-recursive pdf-recursive ps-recursive \
145        tags-recursive uninstall-recursive
146am__can_run_installinfo = \
147  case $$AM_UPDATE_INFO_DIR in \
148    n|no|NO) false;; \
149    *) (install-info --version) >/dev/null 2>&1;; \
150  esac
151am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
152am__vpath_adj = case $$p in \
153    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
154    *) f=$$p;; \
155  esac;
156am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
157am__install_max = 40
158am__nobase_strip_setup = \
159  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
160am__nobase_strip = \
161  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
162am__nobase_list = $(am__nobase_strip_setup); \
163  for p in $$list; do echo "$$p $$p"; done | \
164  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
165  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
166    if (++n[$$2] == $(am__install_max)) \
167      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
168    END { for (dir in files) print dir, files[dir] }'
169am__base_list = \
170  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
171  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
172am__uninstall_files_from_dir = { \
173  test -z "$$files" \
174    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
175    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
176         $(am__cd) "$$dir" && rm -f $$files; }; \
177  }
178am__installdirs = "$(DESTDIR)$(pkgconfigdir)"
179DATA = $(pkgconfig_DATA)
180RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
181  distclean-recursive maintainer-clean-recursive
182am__recursive_targets = \
183  $(RECURSIVE_TARGETS) \
184  $(RECURSIVE_CLEAN_TARGETS) \
185  $(am__extra_recursive_targets)
186AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
187        cscope distdir dist dist-all distcheck
188am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
189# Read a list of newline-separated strings from the standard input,
190# and print each of them once, without duplicates.  Input order is
191# *not* preserved.
192am__uniquify_input = $(AWK) '\
193  BEGIN { nonempty = 0; } \
194  { items[$$0] = 1; nonempty = 1; } \
195  END { if (nonempty) { for (i in items) print i; }; } \
196'
197# Make sure the list of sources is unique.  This is necessary because,
198# e.g., the same source file might be shared among _SOURCES variables
199# for different programs/libraries.
200am__define_uniq_tagged_files = \
201  list='$(am__tagged_files)'; \
202  unique=`for i in $$list; do \
203    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
204  done | $(am__uniquify_input)`
205ETAGS = etags
206CTAGS = ctags
207CSCOPE = cscope
208DIST_SUBDIRS = $(SUBDIRS)
209DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
210distdir = $(PACKAGE)-$(VERSION)
211top_distdir = $(distdir)
212am__remove_distdir = \
213  if test -d "$(distdir)"; then \
214    find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
215      && rm -rf "$(distdir)" \
216      || { sleep 5 && rm -rf "$(distdir)"; }; \
217  else :; fi
218am__post_remove_distdir = $(am__remove_distdir)
219am__relativize = \
220  dir0=`pwd`; \
221  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
222  sed_rest='s,^[^/]*/*,,'; \
223  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
224  sed_butlast='s,/*[^/]*$$,,'; \
225  while test -n "$$dir1"; do \
226    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
227    if test "$$first" != "."; then \
228      if test "$$first" = ".."; then \
229        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
230        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
231      else \
232        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
233        if test "$$first2" = "$$first"; then \
234          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
235        else \
236          dir2="../$$dir2"; \
237        fi; \
238        dir0="$$dir0"/"$$first"; \
239      fi; \
240    fi; \
241    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
242  done; \
243  reldir="$$dir2"
244DIST_ARCHIVES = $(distdir).tar.gz $(distdir).tar.bz2
245GZIP_ENV = --best
246DIST_TARGETS = dist-bzip2 dist-gzip
247distuninstallcheck_listfiles = find . -type f -print
248am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \
249  | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'
250distcleancheck_listfiles = find . -type f -print
251ACLOCAL = @ACLOCAL@
252ADOLC_PATCHLEVEL = @ADOLC_PATCHLEVEL@
253ADOLC_SUBVERSION = @ADOLC_SUBVERSION@
254ADOLC_VERSION = @ADOLC_VERSION@
255ADVBRANCH = @ADVBRANCH@
256AMTAR = @AMTAR@
257AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
258AR = @AR@
259AS = @AS@
260ATRIG_ERF = @ATRIG_ERF@
261AUTOCONF = @AUTOCONF@
262AUTOHEADER = @AUTOHEADER@
263AUTOMAKE = @AUTOMAKE@
264AWK = @AWK@
265CC = @CC@
266CCDEPMODE = @CCDEPMODE@
267CFLAGS = @CFLAGS@
268CPP = @CPP@
269CPPFLAGS = @CPPFLAGS@
270CXX = @CXX@
271CXXCPP = @CXXCPP@
272CXXDEPMODE = @CXXDEPMODE@
273CXXFLAGS = @CXXFLAGS@
274CYGPATH_W = @CYGPATH_W@
275DEFS = @DEFS@
276DEPDIR = @DEPDIR@
277DLLTOOL = @DLLTOOL@
278DSYMUTIL = @DSYMUTIL@
279DUMPBIN = @DUMPBIN@
280ECHO_C = @ECHO_C@
281ECHO_N = @ECHO_N@
282ECHO_T = @ECHO_T@
283EGREP = @EGREP@
284EXEEXT = @EXEEXT@
285FGREP = @FGREP@
286GREP = @GREP@
287HAVE_CXX11 = @HAVE_CXX11@
288INSTALL = @INSTALL@
289INSTALL_DATA = @INSTALL_DATA@
290INSTALL_PROGRAM = @INSTALL_PROGRAM@
291INSTALL_SCRIPT = @INSTALL_SCRIPT@
292INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
293LD = @LD@
294LDFLAGS = @LDFLAGS@
295LIBOBJS = @LIBOBJS@
296LIBS = @LIBS@
297LIBTOOL = @LIBTOOL@
298LIPO = @LIPO@
299LN_S = @LN_S@
300LTLIBOBJS = @LTLIBOBJS@
301MAINT = @MAINT@
302MAKEINFO = @MAKEINFO@
303MANIFEST_TOOL = @MANIFEST_TOOL@
304MKDIR_P = @MKDIR_P@
305NM = @NM@
306NMEDIT = @NMEDIT@
307OBJDUMP = @OBJDUMP@
308OBJEXT = @OBJEXT@
309OTOOL = @OTOOL@
310OTOOL64 = @OTOOL64@
311PACKAGE = @PACKAGE@
312PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
313PACKAGE_NAME = @PACKAGE_NAME@
314PACKAGE_STRING = @PACKAGE_STRING@
315PACKAGE_TARNAME = @PACKAGE_TARNAME@
316PACKAGE_URL = @PACKAGE_URL@
317PACKAGE_VERSION = @PACKAGE_VERSION@
318PATH_SEPARATOR = @PATH_SEPARATOR@
319RANLIB = @RANLIB@
320REAL_TYPE = @REAL_TYPE@
321SED = @SED@
322SET_MAKE = @SET_MAKE@
323SHELL = @SHELL@
324STRIP = @STRIP@
325UINT_TYPE = @UINT_TYPE@
326VERSION = @VERSION@
327_lib = @_lib@
328abs_builddir = @abs_builddir@
329abs_srcdir = @abs_srcdir@
330abs_top_builddir = @abs_top_builddir@
331abs_top_srcdir = @abs_top_srcdir@
332ac_adolc_cflags = @ac_adolc_cflags@
333ac_adolc_cxxflags = @ac_adolc_cxxflags@
334ac_aux_dir = @ac_aux_dir@
335ac_ct_AR = @ac_ct_AR@
336ac_ct_CC = @ac_ct_CC@
337ac_ct_CXX = @ac_ct_CXX@
338ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
339adolclib = @adolclib@
340am__include = @am__include@
341am__leading_dot = @am__leading_dot@
342am__quote = @am__quote@
343am__tar = @am__tar@
344am__untar = @am__untar@
345bindir = @bindir@
346build = @build@
347build_alias = @build_alias@
348build_cpu = @build_cpu@
349build_os = @build_os@
350build_vendor = @build_vendor@
351builddir = @builddir@
352datadir = @datadir@
353datarootdir = @datarootdir@
354docdir = @docdir@
355dvidir = @dvidir@
356exec_prefix = @exec_prefix@
357host = @host@
358host_alias = @host_alias@
359host_cpu = @host_cpu@
360host_os = @host_os@
361host_vendor = @host_vendor@
362htmldir = @htmldir@
363includedir = @includedir@
364infodir = @infodir@
365install_sh = @install_sh@
366libdir = @libdir@
367libexecdir = @libexecdir@
368localedir = @localedir@
369localstatedir = @localstatedir@
370mandir = @mandir@
371mkdir_p = @mkdir_p@
372oldincludedir = @oldincludedir@
373pdfdir = @pdfdir@
374prefix = @prefix@
375program_transform_name = @program_transform_name@
376psdir = @psdir@
377saveCC = @saveCC@
378saveCXX = @saveCXX@
379sbindir = @sbindir@
380sharedstatedir = @sharedstatedir@
381srcdir = @srcdir@
382sysconfdir = @sysconfdir@
383target_alias = @target_alias@
384top_build_prefix = @top_build_prefix@
385top_builddir = @top_builddir@
386top_srcdir = @top_srcdir@
387ACLOCAL_AMFLAGS = -I autoconf
388AUTOMAKE_OPTIONS = foreign
389EXTRA_DIST = TODO BUGS LICENSE update_versions.sh \
390                       ADOL-C/doc/version.tex.in ADOL-C/doc/version.tex \
391                       ADOL-C/doc/adolc-manual.pdf ADOL-C/doc/adolc-manual.ps \
392                       ADOL-C/doc/adolc-manual.tex ADOL-C/doc/short_ref.pdf \
393                       ADOL-C/doc/short_ref.ps ADOL-C/doc/short_ref.tex \
394                       ADOL-C/doc/multiplexed.pdf ADOL-C/doc/multiplexed.eps \
395                       ADOL-C/doc/tapeadv.pdf ADOL-C/doc/tapeadv.eps \
396                       ADOL-C/doc/tapebasic.pdf ADOL-C/doc/tapebasic.eps \
397                       ADOL-C/doc/tap_point.pdf ADOL-C/doc/tap_point.eps \
398                       MSVisualStudio/v10/adolc.sln MSVisualStudio/v10/adolc.vcxproj \
399                       MSVisualStudio/v10/ColPack_Readme_VC++.txt \
400                       MSVisualStudio/v10/ColPack.vcxproj \
401                       MSVisualStudio/v10/sparse/config.h.in MSVisualStudio/v10/nosparse/config.h.in \
402                       MSVisualStudio/v10/x64/sparse/config.h.in MSVisualStudio/v10/x64/nosparse/config.h.in \
403                       MSVisualStudio/v10/sparse/config.h MSVisualStudio/v10/nosparse/config.h \
404                       MSVisualStudio/v10/x64/sparse/config.h MSVisualStudio/v10/x64/nosparse/config.h \
405                       MSVisualStudio/v10/Readme_VC++.txt \
406                       MSVisualStudio/v10/installer.sh \
407                       adolc.spec.in adolc.spec \
408                       update_versions.sh
409
410SUBDIRS = ADOL-C
411
412# install pkg-config information
413pkgconfigdir = $(libdir)/pkgconfig
414pkgconfig_DATA = @adolclib@.pc
415all: all-recursive
416
417.SUFFIXES:
418am--refresh: Makefile
419        @:
420$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
421        @for dep in $?; do \
422          case '$(am__configure_deps)' in \
423            *$$dep*) \
424              echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \
425              $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \
426                && exit 0; \
427              exit 1;; \
428          esac; \
429        done; \
430        echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
431        $(am__cd) $(top_srcdir) && \
432          $(AUTOMAKE) --foreign Makefile
433.PRECIOUS: Makefile
434Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
435        @case '$?' in \
436          *config.status*) \
437            echo ' $(SHELL) ./config.status'; \
438            $(SHELL) ./config.status;; \
439          *) \
440            echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
441            cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
442        esac;
443
444$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
445        $(SHELL) ./config.status --recheck
446
447$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
448        $(am__cd) $(srcdir) && $(AUTOCONF)
449$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
450        $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
451$(am__aclocal_m4_deps):
452ADOL-C/doc/version.tex: $(top_builddir)/config.status $(top_srcdir)/ADOL-C/doc/version.tex.in
453        cd $(top_builddir) && $(SHELL) ./config.status $@
454MSVisualStudio/v10/sparse/config.h: $(top_builddir)/config.status $(top_srcdir)/MSVisualStudio/v10/sparse/config.h.in
455        cd $(top_builddir) && $(SHELL) ./config.status $@
456MSVisualStudio/v10/nosparse/config.h: $(top_builddir)/config.status $(top_srcdir)/MSVisualStudio/v10/nosparse/config.h.in
457        cd $(top_builddir) && $(SHELL) ./config.status $@
458MSVisualStudio/v10/x64/sparse/config.h: $(top_builddir)/config.status $(top_srcdir)/MSVisualStudio/v10/x64/sparse/config.h.in
459        cd $(top_builddir) && $(SHELL) ./config.status $@
460MSVisualStudio/v10/x64/nosparse/config.h: $(top_builddir)/config.status $(top_srcdir)/MSVisualStudio/v10/x64/nosparse/config.h.in
461        cd $(top_builddir) && $(SHELL) ./config.status $@
462adolc.spec: $(top_builddir)/config.status $(srcdir)/adolc.spec.in
463        cd $(top_builddir) && $(SHELL) ./config.status $@
464adolclib.pc: $(top_builddir)/config.status $(srcdir)/adolclib.pc.in
465        cd $(top_builddir) && $(SHELL) ./config.status $@
466
467mostlyclean-libtool:
468        -rm -f *.lo
469
470clean-libtool:
471        -rm -rf .libs _libs
472
473distclean-libtool:
474        -rm -f libtool config.lt
475install-pkgconfigDATA: $(pkgconfig_DATA)
476        @$(NORMAL_INSTALL)
477        @list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \
478        if test -n "$$list"; then \
479          echo " $(MKDIR_P) '$(DESTDIR)$(pkgconfigdir)'"; \
480          $(MKDIR_P) "$(DESTDIR)$(pkgconfigdir)" || exit 1; \
481        fi; \
482        for p in $$list; do \
483          if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
484          echo "$$d$$p"; \
485        done | $(am__base_list) | \
486        while read files; do \
487          echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pkgconfigdir)'"; \
488          $(INSTALL_DATA) $$files "$(DESTDIR)$(pkgconfigdir)" || exit $$?; \
489        done
490
491uninstall-pkgconfigDATA:
492        @$(NORMAL_UNINSTALL)
493        @list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \
494        files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
495        dir='$(DESTDIR)$(pkgconfigdir)'; $(am__uninstall_files_from_dir)
496
497# This directory's subdirectories are mostly independent; you can cd
498# into them and run 'make' without going through this Makefile.
499# To change the values of 'make' variables: instead of editing Makefiles,
500# (1) if the variable is set in 'config.status', edit 'config.status'
501#     (which will cause the Makefiles to be regenerated when you run 'make');
502# (2) otherwise, pass the desired values on the 'make' command line.
503$(am__recursive_targets):
504        @fail=; \
505        if $(am__make_keepgoing); then \
506          failcom='fail=yes'; \
507        else \
508          failcom='exit 1'; \
509        fi; \
510        dot_seen=no; \
511        target=`echo $@ | sed s/-recursive//`; \
512        case "$@" in \
513          distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
514          *) list='$(SUBDIRS)' ;; \
515        esac; \
516        for subdir in $$list; do \
517          echo "Making $$target in $$subdir"; \
518          if test "$$subdir" = "."; then \
519            dot_seen=yes; \
520            local_target="$$target-am"; \
521          else \
522            local_target="$$target"; \
523          fi; \
524          ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
525          || eval $$failcom; \
526        done; \
527        if test "$$dot_seen" = "no"; then \
528          $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
529        fi; test -z "$$fail"
530
531ID: $(am__tagged_files)
532        $(am__define_uniq_tagged_files); mkid -fID $$unique
533tags: tags-recursive
534TAGS: tags
535
536tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
537        set x; \
538        here=`pwd`; \
539        if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
540          include_option=--etags-include; \
541          empty_fix=.; \
542        else \
543          include_option=--include; \
544          empty_fix=; \
545        fi; \
546        list='$(SUBDIRS)'; for subdir in $$list; do \
547          if test "$$subdir" = .; then :; else \
548            test ! -f $$subdir/TAGS || \
549              set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
550          fi; \
551        done; \
552        $(am__define_uniq_tagged_files); \
553        shift; \
554        if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
555          test -n "$$unique" || unique=$$empty_fix; \
556          if test $$# -gt 0; then \
557            $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
558              "$$@" $$unique; \
559          else \
560            $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
561              $$unique; \
562          fi; \
563        fi
564ctags: ctags-recursive
565
566CTAGS: ctags
567ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
568        $(am__define_uniq_tagged_files); \
569        test -z "$(CTAGS_ARGS)$$unique" \
570          || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
571             $$unique
572
573GTAGS:
574        here=`$(am__cd) $(top_builddir) && pwd` \
575          && $(am__cd) $(top_srcdir) \
576          && gtags -i $(GTAGS_ARGS) "$$here"
577cscope: cscope.files
578        test ! -s cscope.files \
579          || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS)
580clean-cscope:
581        -rm -f cscope.files
582cscope.files: clean-cscope cscopelist
583cscopelist: cscopelist-recursive
584
585cscopelist-am: $(am__tagged_files)
586        list='$(am__tagged_files)'; \
587        case "$(srcdir)" in \
588          [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
589          *) sdir=$(subdir)/$(srcdir) ;; \
590        esac; \
591        for i in $$list; do \
592          if test -f "$$i"; then \
593            echo "$(subdir)/$$i"; \
594          else \
595            echo "$$sdir/$$i"; \
596          fi; \
597        done >> $(top_builddir)/cscope.files
598
599distclean-tags:
600        -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
601        -rm -f cscope.out cscope.in.out cscope.po.out cscope.files
602
603distdir: $(DISTFILES)
604        $(am__remove_distdir)
605        test -d "$(distdir)" || mkdir "$(distdir)"
606        @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
607        topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
608        list='$(DISTFILES)'; \
609          dist_files=`for file in $$list; do echo $$file; done | \
610          sed -e "s|^$$srcdirstrip/||;t" \
611              -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
612        case $$dist_files in \
613          */*) $(MKDIR_P) `echo "$$dist_files" | \
614                           sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
615                           sort -u` ;; \
616        esac; \
617        for file in $$dist_files; do \
618          if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
619          if test -d $$d/$$file; then \
620            dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
621            if test -d "$(distdir)/$$file"; then \
622              find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
623            fi; \
624            if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
625              cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
626              find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
627            fi; \
628            cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
629          else \
630            test -f "$(distdir)/$$file" \
631            || cp -p $$d/$$file "$(distdir)/$$file" \
632            || exit 1; \
633          fi; \
634        done
635        @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
636          if test "$$subdir" = .; then :; else \
637            $(am__make_dryrun) \
638              || test -d "$(distdir)/$$subdir" \
639              || $(MKDIR_P) "$(distdir)/$$subdir" \
640              || exit 1; \
641            dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
642            $(am__relativize); \
643            new_distdir=$$reldir; \
644            dir1=$$subdir; dir2="$(top_distdir)"; \
645            $(am__relativize); \
646            new_top_distdir=$$reldir; \
647            echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
648            echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
649            ($(am__cd) $$subdir && \
650              $(MAKE) $(AM_MAKEFLAGS) \
651                top_distdir="$$new_top_distdir" \
652                distdir="$$new_distdir" \
653                am__remove_distdir=: \
654                am__skip_length_check=: \
655                am__skip_mode_fix=: \
656                distdir) \
657              || exit 1; \
658          fi; \
659        done
660        -test -n "$(am__skip_mode_fix)" \
661        || find "$(distdir)" -type d ! -perm -755 \
662                -exec chmod u+rwx,go+rx {} \; -o \
663          ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
664          ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
665          ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
666        || chmod -R a+r "$(distdir)"
667dist-gzip: distdir
668        tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
669        $(am__post_remove_distdir)
670dist-bzip2: distdir
671        tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2
672        $(am__post_remove_distdir)
673
674dist-lzip: distdir
675        tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz
676        $(am__post_remove_distdir)
677
678dist-xz: distdir
679        tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz
680        $(am__post_remove_distdir)
681
682dist-tarZ: distdir
683        tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
684        $(am__post_remove_distdir)
685
686dist-shar: distdir
687        shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
688        $(am__post_remove_distdir)
689
690dist-zip: distdir
691        -rm -f $(distdir).zip
692        zip -rq $(distdir).zip $(distdir)
693        $(am__post_remove_distdir)
694
695dist dist-all:
696        $(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:'
697        $(am__post_remove_distdir)
698
699# This target untars the dist file and tries a VPATH configuration.  Then
700# it guarantees that the distribution is self-contained by making another
701# tarfile.
702distcheck: dist
703        case '$(DIST_ARCHIVES)' in \
704        *.tar.gz*) \
705          GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\
706        *.tar.bz2*) \
707          bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
708        *.tar.lz*) \
709          lzip -dc $(distdir).tar.lz | $(am__untar) ;;\
710        *.tar.xz*) \
711          xz -dc $(distdir).tar.xz | $(am__untar) ;;\
712        *.tar.Z*) \
713          uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
714        *.shar.gz*) \
715          GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\
716        *.zip*) \
717          unzip $(distdir).zip ;;\
718        esac
719        chmod -R a-w $(distdir)
720        chmod u+w $(distdir)
721        mkdir $(distdir)/_build $(distdir)/_inst
722        chmod a-w $(distdir)
723        test -d $(distdir)/_build || exit 0; \
724        dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
725          && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
726          && am__cwd=`pwd` \
727          && $(am__cd) $(distdir)/_build \
728          && ../configure --srcdir=.. --prefix="$$dc_install_base" \
729            $(AM_DISTCHECK_CONFIGURE_FLAGS) \
730            $(DISTCHECK_CONFIGURE_FLAGS) \
731          && $(MAKE) $(AM_MAKEFLAGS) \
732          && $(MAKE) $(AM_MAKEFLAGS) dvi \
733          && $(MAKE) $(AM_MAKEFLAGS) check \
734          && $(MAKE) $(AM_MAKEFLAGS) install \
735          && $(MAKE) $(AM_MAKEFLAGS) installcheck \
736          && $(MAKE) $(AM_MAKEFLAGS) uninstall \
737          && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
738                distuninstallcheck \
739          && chmod -R a-w "$$dc_install_base" \
740          && ({ \
741               (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
742               && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
743               && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
744               && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
745                    distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
746              } || { rm -rf "$$dc_destdir"; exit 1; }) \
747          && rm -rf "$$dc_destdir" \
748          && $(MAKE) $(AM_MAKEFLAGS) dist \
749          && rm -rf $(DIST_ARCHIVES) \
750          && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
751          && cd "$$am__cwd" \
752          || exit 1
753        $(am__post_remove_distdir)
754        @(echo "$(distdir) archives ready for distribution: "; \
755          list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
756          sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
757distuninstallcheck:
758        @test -n '$(distuninstallcheck_dir)' || { \
759          echo 'ERROR: trying to run $@ with an empty' \
760               '$$(distuninstallcheck_dir)' >&2; \
761          exit 1; \
762        }; \
763        $(am__cd) '$(distuninstallcheck_dir)' || { \
764          echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \
765          exit 1; \
766        }; \
767        test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \
768           || { echo "ERROR: files left after uninstall:" ; \
769                if test -n "$(DESTDIR)"; then \
770                  echo "  (check DESTDIR support)"; \
771                fi ; \
772                $(distuninstallcheck_listfiles) ; \
773                exit 1; } >&2
774distcleancheck: distclean
775        @if test '$(srcdir)' = . ; then \
776          echo "ERROR: distcleancheck can only run from a VPATH build" ; \
777          exit 1 ; \
778        fi
779        @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
780          || { echo "ERROR: files left in build directory after distclean:" ; \
781               $(distcleancheck_listfiles) ; \
782               exit 1; } >&2
783check-am: all-am
784check: check-recursive
785all-am: Makefile $(DATA)
786installdirs: installdirs-recursive
787installdirs-am:
788        for dir in "$(DESTDIR)$(pkgconfigdir)"; do \
789          test -z "$$dir" || $(MKDIR_P) "$$dir"; \
790        done
791install: install-recursive
792install-exec: install-exec-recursive
793install-data: install-data-recursive
794uninstall: uninstall-recursive
795
796install-am: all-am
797        @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
798
799installcheck: installcheck-recursive
800install-strip:
801        if test -z '$(STRIP)'; then \
802          $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
803            install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
804              install; \
805        else \
806          $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
807            install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
808            "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
809        fi
810mostlyclean-generic:
811
812clean-generic:
813
814distclean-generic:
815        -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
816        -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
817
818maintainer-clean-generic:
819        @echo "This command is intended for maintainers to use"
820        @echo "it deletes files that may require special tools to rebuild."
821clean: clean-recursive
822
823clean-am: clean-generic clean-libtool mostlyclean-am
824
825distclean: distclean-recursive
826        -rm -f $(am__CONFIG_DISTCLEAN_FILES)
827        -rm -f Makefile
828distclean-am: clean-am distclean-generic distclean-libtool \
829        distclean-tags
830
831dvi: dvi-recursive
832
833dvi-am:
834
835html: html-recursive
836
837html-am:
838
839info: info-recursive
840
841info-am:
842
843install-data-am: install-pkgconfigDATA
844
845install-dvi: install-dvi-recursive
846
847install-dvi-am:
848
849install-exec-am:
850
851install-html: install-html-recursive
852
853install-html-am:
854
855install-info: install-info-recursive
856
857install-info-am:
858
859install-man:
860
861install-pdf: install-pdf-recursive
862
863install-pdf-am:
864
865install-ps: install-ps-recursive
866
867install-ps-am:
868
869installcheck-am:
870
871maintainer-clean: maintainer-clean-recursive
872        -rm -f $(am__CONFIG_DISTCLEAN_FILES)
873        -rm -rf $(top_srcdir)/autom4te.cache
874        -rm -f Makefile
875maintainer-clean-am: distclean-am maintainer-clean-generic
876
877mostlyclean: mostlyclean-recursive
878
879mostlyclean-am: mostlyclean-generic mostlyclean-libtool
880
881pdf: pdf-recursive
882
883pdf-am:
884
885ps: ps-recursive
886
887ps-am:
888
889uninstall-am: uninstall-pkgconfigDATA
890
891.MAKE: $(am__recursive_targets) install-am install-strip
892
893.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \
894        am--refresh check check-am clean clean-cscope clean-generic \
895        clean-libtool cscope cscopelist-am ctags ctags-am dist \
896        dist-all dist-bzip2 dist-gzip dist-lzip dist-shar dist-tarZ \
897        dist-xz dist-zip distcheck distclean distclean-generic \
898        distclean-libtool distclean-tags distcleancheck distdir \
899        distuninstallcheck dvi dvi-am html html-am info info-am \
900        install install-am install-data install-data-am install-dvi \
901        install-dvi-am install-exec install-exec-am install-html \
902        install-html-am install-info install-info-am install-man \
903        install-pdf install-pdf-am install-pkgconfigDATA install-ps \
904        install-ps-am install-strip installcheck installcheck-am \
905        installdirs installdirs-am maintainer-clean \
906        maintainer-clean-generic mostlyclean mostlyclean-generic \
907        mostlyclean-libtool pdf pdf-am ps ps-am tags tags-am uninstall \
908        uninstall-am uninstall-pkgconfigDATA
909
910
911@adolclib@.pc: adolclib.pc
912        mv $< $@
913
914test: all
915        cd ADOL-C; $(MAKE) test
916
917.PHONY: test
918
919# Tell versions [3.59,3.63) of GNU make to not export all variables.
920# Otherwise a system limit (for SysV at least) may be exceeded.
921.NOEXPORT:
Note: See TracBrowser for help on using the repository browser.