source: trunk/Makefile.in @ 472

Last change on this file since 472 was 472, checked in by kulshres, 6 years ago

regenerate files

Signed-off-by: Kshitij Kulshreshtha <kshitij@…>

File size: 27.7 KB
Line 
1# Makefile.in generated by automake 1.13.4 from Makefile.am.
2# @configure_input@
3
4# Copyright (C) 1994-2013 Free Software Foundation, Inc.
5
6# This Makefile.in is free software; the Free Software Foundation
7# gives unlimited permission to copy and/or distribute it,
8# with or without modifications, as long as this notice is preserved.
9
10# This program is distributed in the hope that it will be useful,
11# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
12# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
13# PARTICULAR PURPOSE.
14
15@SET_MAKE@
16
17##############################################################################
18##############################################################################
19VPATH = @srcdir@
20am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
21am__make_running_with_option = \
22  case $${target_option-} in \
23      ?) ;; \
24      *) echo "am__make_running_with_option: internal error: invalid" \
25              "target option '$${target_option-}' specified" >&2; \
26         exit 1;; \
27  esac; \
28  has_opt=no; \
29  sane_makeflags=$$MAKEFLAGS; \
30  if $(am__is_gnu_make); then \
31    sane_makeflags=$$MFLAGS; \
32  else \
33    case $$MAKEFLAGS in \
34      *\\[\ \   ]*) \
35        bs=\\; \
36        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
37          | sed "s/$$bs$$bs[$$bs $$bs   ]*//g"`;; \
38    esac; \
39  fi; \
40  skip_next=no; \
41  strip_trailopt () \
42  { \
43    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
44  }; \
45  for flg in $$sane_makeflags; do \
46    test $$skip_next = yes && { skip_next=no; continue; }; \
47    case $$flg in \
48      *=*|--*) continue;; \
49        -*I) strip_trailopt 'I'; skip_next=yes;; \
50      -*I?*) strip_trailopt 'I';; \
51        -*O) strip_trailopt 'O'; skip_next=yes;; \
52      -*O?*) strip_trailopt 'O';; \
53        -*l) strip_trailopt 'l'; skip_next=yes;; \
54      -*l?*) strip_trailopt 'l';; \
55      -[dEDm]) skip_next=yes;; \
56      -[JT]) skip_next=yes;; \
57    esac; \
58    case $$flg in \
59      *$$target_option*) has_opt=yes; break;; \
60    esac; \
61  done; \
62  test $$has_opt = yes
63am__make_dryrun = (target_option=n; $(am__make_running_with_option))
64am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
65pkgdatadir = $(datadir)/@PACKAGE@
66pkgincludedir = $(includedir)/@PACKAGE@
67pkglibdir = $(libdir)/@PACKAGE@
68pkglibexecdir = $(libexecdir)/@PACKAGE@
69am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
70install_sh_DATA = $(install_sh) -c -m 644
71install_sh_PROGRAM = $(install_sh) -c
72install_sh_SCRIPT = $(install_sh) -c
73INSTALL_HEADER = $(INSTALL_DATA)
74transform = $(program_transform_name)
75NORMAL_INSTALL = :
76PRE_INSTALL = :
77POST_INSTALL = :
78NORMAL_UNINSTALL = :
79PRE_UNINSTALL = :
80POST_UNINSTALL = :
81build_triplet = @build@
82host_triplet = @host@
83subdir = .
84DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am \
85        $(top_srcdir)/configure $(am__configure_deps) \
86        $(top_srcdir)/ADOL-C/doc/version.tex.in \
87        $(top_srcdir)/MSVisualStudio/v10/sparse/config.h.in \
88        $(top_srcdir)/MSVisualStudio/v10/nosparse/config.h.in \
89        $(top_srcdir)/MSVisualStudio/v10/x64/sparse/config.h.in \
90        $(top_srcdir)/MSVisualStudio/v10/x64/nosparse/config.h.in \
91        $(srcdir)/adolc.spec.in AUTHORS ChangeLog INSTALL NEWS README \
92        TODO autoconf/config.guess autoconf/config.sub \
93        autoconf/depcomp autoconf/install-sh autoconf/missing \
94        autoconf/ltmain.sh $(top_srcdir)/autoconf/config.guess \
95        $(top_srcdir)/autoconf/config.sub \
96        $(top_srcdir)/autoconf/install-sh \
97        $(top_srcdir)/autoconf/ltmain.sh \
98        $(top_srcdir)/autoconf/missing
99ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
100am__aclocal_m4_deps = $(top_srcdir)/autoconf/acx_builtin.m4 \
101        $(top_srcdir)/autoconf/ampi.m4 \
102        $(top_srcdir)/autoconf/colpack.m4 \
103        $(top_srcdir)/autoconf/libtool.m4 \
104        $(top_srcdir)/autoconf/ltoptions.m4 \
105        $(top_srcdir)/autoconf/ltsugar.m4 \
106        $(top_srcdir)/autoconf/ltversion.m4 \
107        $(top_srcdir)/autoconf/lt~obsolete.m4 \
108        $(top_srcdir)/autoconf/mpi.m4 $(top_srcdir)/configure.ac
109am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
110        $(ACLOCAL_M4)
111am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
112 configure.lineno config.status.lineno
113mkinstalldirs = $(install_sh) -d
114CONFIG_HEADER = $(top_builddir)/ADOL-C/src/config.h
115CONFIG_CLEAN_FILES = ADOL-C/doc/version.tex \
116        MSVisualStudio/v10/sparse/config.h \
117        MSVisualStudio/v10/nosparse/config.h \
118        MSVisualStudio/v10/x64/sparse/config.h \
119        MSVisualStudio/v10/x64/nosparse/config.h adolc.spec
120CONFIG_CLEAN_VPATH_FILES =
121AM_V_P = $(am__v_P_@AM_V@)
122am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
123am__v_P_0 = false
124am__v_P_1 = :
125AM_V_GEN = $(am__v_GEN_@AM_V@)
126am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
127am__v_GEN_0 = @echo "  GEN     " $@;
128am__v_GEN_1 =
129AM_V_at = $(am__v_at_@AM_V@)
130am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
131am__v_at_0 = @
132am__v_at_1 =
133SOURCES =
134DIST_SOURCES =
135RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
136        ctags-recursive dvi-recursive html-recursive info-recursive \
137        install-data-recursive install-dvi-recursive \
138        install-exec-recursive install-html-recursive \
139        install-info-recursive install-pdf-recursive \
140        install-ps-recursive install-recursive installcheck-recursive \
141        installdirs-recursive pdf-recursive ps-recursive \
142        tags-recursive uninstall-recursive
143am__can_run_installinfo = \
144  case $$AM_UPDATE_INFO_DIR in \
145    n|no|NO) false;; \
146    *) (install-info --version) >/dev/null 2>&1;; \
147  esac
148RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
149  distclean-recursive maintainer-clean-recursive
150am__recursive_targets = \
151  $(RECURSIVE_TARGETS) \
152  $(RECURSIVE_CLEAN_TARGETS) \
153  $(am__extra_recursive_targets)
154AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
155        cscope distdir dist dist-all distcheck
156am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
157# Read a list of newline-separated strings from the standard input,
158# and print each of them once, without duplicates.  Input order is
159# *not* preserved.
160am__uniquify_input = $(AWK) '\
161  BEGIN { nonempty = 0; } \
162  { items[$$0] = 1; nonempty = 1; } \
163  END { if (nonempty) { for (i in items) print i; }; } \
164'
165# Make sure the list of sources is unique.  This is necessary because,
166# e.g., the same source file might be shared among _SOURCES variables
167# for different programs/libraries.
168am__define_uniq_tagged_files = \
169  list='$(am__tagged_files)'; \
170  unique=`for i in $$list; do \
171    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
172  done | $(am__uniquify_input)`
173ETAGS = etags
174CTAGS = ctags
175CSCOPE = cscope
176DIST_SUBDIRS = $(SUBDIRS)
177DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
178distdir = $(PACKAGE)-$(VERSION)
179top_distdir = $(distdir)
180am__remove_distdir = \
181  if test -d "$(distdir)"; then \
182    find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
183      && rm -rf "$(distdir)" \
184      || { sleep 5 && rm -rf "$(distdir)"; }; \
185  else :; fi
186am__post_remove_distdir = $(am__remove_distdir)
187am__relativize = \
188  dir0=`pwd`; \
189  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
190  sed_rest='s,^[^/]*/*,,'; \
191  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
192  sed_butlast='s,/*[^/]*$$,,'; \
193  while test -n "$$dir1"; do \
194    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
195    if test "$$first" != "."; then \
196      if test "$$first" = ".."; then \
197        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
198        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
199      else \
200        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
201        if test "$$first2" = "$$first"; then \
202          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
203        else \
204          dir2="../$$dir2"; \
205        fi; \
206        dir0="$$dir0"/"$$first"; \
207      fi; \
208    fi; \
209    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
210  done; \
211  reldir="$$dir2"
212DIST_ARCHIVES = $(distdir).tar.gz $(distdir).tar.bz2
213GZIP_ENV = --best
214DIST_TARGETS = dist-bzip2 dist-gzip
215distuninstallcheck_listfiles = find . -type f -print
216am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \
217  | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'
218distcleancheck_listfiles = find . -type f -print
219ACLOCAL = @ACLOCAL@
220ADOLC_PATCHLEVEL = @ADOLC_PATCHLEVEL@
221ADOLC_SUBVERSION = @ADOLC_SUBVERSION@
222ADOLC_VERSION = @ADOLC_VERSION@
223ADVBRANCH = @ADVBRANCH@
224AMTAR = @AMTAR@
225AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
226AR = @AR@
227AS = @AS@
228ATRIG_ERF = @ATRIG_ERF@
229AUTOCONF = @AUTOCONF@
230AUTOHEADER = @AUTOHEADER@
231AUTOMAKE = @AUTOMAKE@
232AWK = @AWK@
233CC = @CC@
234CCDEPMODE = @CCDEPMODE@
235CFLAGS = @CFLAGS@
236CPP = @CPP@
237CPPFLAGS = @CPPFLAGS@
238CXX = @CXX@
239CXXCPP = @CXXCPP@
240CXXDEPMODE = @CXXDEPMODE@
241CXXFLAGS = @CXXFLAGS@
242CYGPATH_W = @CYGPATH_W@
243DEFS = @DEFS@
244DEPDIR = @DEPDIR@
245DLLTOOL = @DLLTOOL@
246DSYMUTIL = @DSYMUTIL@
247DUMPBIN = @DUMPBIN@
248ECHO_C = @ECHO_C@
249ECHO_N = @ECHO_N@
250ECHO_T = @ECHO_T@
251EGREP = @EGREP@
252EXEEXT = @EXEEXT@
253FGREP = @FGREP@
254GREP = @GREP@
255INSTALL = @INSTALL@
256INSTALL_DATA = @INSTALL_DATA@
257INSTALL_PROGRAM = @INSTALL_PROGRAM@
258INSTALL_SCRIPT = @INSTALL_SCRIPT@
259INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
260LD = @LD@
261LDFLAGS = @LDFLAGS@
262LIBOBJS = @LIBOBJS@
263LIBS = @LIBS@
264LIBTOOL = @LIBTOOL@
265LIPO = @LIPO@
266LN_S = @LN_S@
267LTLIBOBJS = @LTLIBOBJS@
268MAINT = @MAINT@
269MAKEINFO = @MAKEINFO@
270MANIFEST_TOOL = @MANIFEST_TOOL@
271MKDIR_P = @MKDIR_P@
272NM = @NM@
273NMEDIT = @NMEDIT@
274OBJDUMP = @OBJDUMP@
275OBJEXT = @OBJEXT@
276OTOOL = @OTOOL@
277OTOOL64 = @OTOOL64@
278PACKAGE = @PACKAGE@
279PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
280PACKAGE_NAME = @PACKAGE_NAME@
281PACKAGE_STRING = @PACKAGE_STRING@
282PACKAGE_TARNAME = @PACKAGE_TARNAME@
283PACKAGE_URL = @PACKAGE_URL@
284PACKAGE_VERSION = @PACKAGE_VERSION@
285PATH_SEPARATOR = @PATH_SEPARATOR@
286RANLIB = @RANLIB@
287REAL_TYPE = @REAL_TYPE@
288SED = @SED@
289SET_MAKE = @SET_MAKE@
290SHELL = @SHELL@
291STRIP = @STRIP@
292UINT_TYPE = @UINT_TYPE@
293VERSION = @VERSION@
294_lib = @_lib@
295abs_builddir = @abs_builddir@
296abs_srcdir = @abs_srcdir@
297abs_top_builddir = @abs_top_builddir@
298abs_top_srcdir = @abs_top_srcdir@
299ac_adolc_cflags = @ac_adolc_cflags@
300ac_adolc_cxxflags = @ac_adolc_cxxflags@
301ac_aux_dir = @ac_aux_dir@
302ac_ct_AR = @ac_ct_AR@
303ac_ct_CC = @ac_ct_CC@
304ac_ct_CXX = @ac_ct_CXX@
305ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
306adolclib = @adolclib@
307am__include = @am__include@
308am__leading_dot = @am__leading_dot@
309am__quote = @am__quote@
310am__tar = @am__tar@
311am__untar = @am__untar@
312bindir = @bindir@
313build = @build@
314build_alias = @build_alias@
315build_cpu = @build_cpu@
316build_os = @build_os@
317build_vendor = @build_vendor@
318builddir = @builddir@
319datadir = @datadir@
320datarootdir = @datarootdir@
321docdir = @docdir@
322dvidir = @dvidir@
323exec_prefix = @exec_prefix@
324host = @host@
325host_alias = @host_alias@
326host_cpu = @host_cpu@
327host_os = @host_os@
328host_vendor = @host_vendor@
329htmldir = @htmldir@
330includedir = @includedir@
331infodir = @infodir@
332install_sh = @install_sh@
333libdir = @libdir@
334libexecdir = @libexecdir@
335localedir = @localedir@
336localstatedir = @localstatedir@
337mandir = @mandir@
338mkdir_p = @mkdir_p@
339oldincludedir = @oldincludedir@
340pdfdir = @pdfdir@
341prefix = @prefix@
342program_transform_name = @program_transform_name@
343psdir = @psdir@
344saveCC = @saveCC@
345saveCXX = @saveCXX@
346sbindir = @sbindir@
347sharedstatedir = @sharedstatedir@
348srcdir = @srcdir@
349sysconfdir = @sysconfdir@
350target_alias = @target_alias@
351top_build_prefix = @top_build_prefix@
352top_builddir = @top_builddir@
353top_srcdir = @top_srcdir@
354ACLOCAL_AMFLAGS = -I autoconf
355AUTOMAKE_OPTIONS = foreign
356EXTRA_DIST = TODO BUGS LICENSE update_versions.sh \
357                       ADOL-C/doc/version.tex.in ADOL-C/doc/version.tex \
358                       ADOL-C/doc/adolc-manual.pdf ADOL-C/doc/adolc-manual.ps \
359                       ADOL-C/doc/adolc-manual.tex ADOL-C/doc/short_ref.pdf \
360                       ADOL-C/doc/short_ref.ps ADOL-C/doc/short_ref.tex \
361                       ADOL-C/doc/multiplexed.pdf ADOL-C/doc/multiplexed.eps \
362                       ADOL-C/doc/tapeadv.pdf ADOL-C/doc/tapeadv.eps \
363                       ADOL-C/doc/tapebasic.pdf ADOL-C/doc/tapebasic.eps \
364                       ADOL-C/doc/tap_point.pdf ADOL-C/doc/tap_point.eps \
365                       MSVisualStudio/v10/adolc.sln MSVisualStudio/v10/adolc.vcxproj \
366                       MSVisualStudio/v10/ColPack_Readme_VC++.txt \
367                       MSVisualStudio/v10/ColPack.vcxproj \
368                       MSVisualStudio/v10/sparse/config.h.in MSVisualStudio/v10/nosparse/config.h.in \
369                       MSVisualStudio/v10/x64/sparse/config.h.in MSVisualStudio/v10/x64/nosparse/config.h.in \
370                       MSVisualStudio/v10/sparse/config.h MSVisualStudio/v10/nosparse/config.h \
371                       MSVisualStudio/v10/x64/sparse/config.h MSVisualStudio/v10/x64/nosparse/config.h \
372                       MSVisualStudio/v10/Readme_VC++.txt \
373                       MSVisualStudio/v10/installer.sh \
374                       adolc.spec.in adolc.spec \
375                       update_versions.sh
376
377SUBDIRS = ADOL-C
378all: all-recursive
379
380.SUFFIXES:
381am--refresh: Makefile
382        @:
383$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
384        @for dep in $?; do \
385          case '$(am__configure_deps)' in \
386            *$$dep*) \
387              echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \
388              $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \
389                && exit 0; \
390              exit 1;; \
391          esac; \
392        done; \
393        echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
394        $(am__cd) $(top_srcdir) && \
395          $(AUTOMAKE) --foreign Makefile
396.PRECIOUS: Makefile
397Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
398        @case '$?' in \
399          *config.status*) \
400            echo ' $(SHELL) ./config.status'; \
401            $(SHELL) ./config.status;; \
402          *) \
403            echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
404            cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
405        esac;
406
407$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
408        $(SHELL) ./config.status --recheck
409
410$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
411        $(am__cd) $(srcdir) && $(AUTOCONF)
412$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
413        $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
414$(am__aclocal_m4_deps):
415ADOL-C/doc/version.tex: $(top_builddir)/config.status $(top_srcdir)/ADOL-C/doc/version.tex.in
416        cd $(top_builddir) && $(SHELL) ./config.status $@
417MSVisualStudio/v10/sparse/config.h: $(top_builddir)/config.status $(top_srcdir)/MSVisualStudio/v10/sparse/config.h.in
418        cd $(top_builddir) && $(SHELL) ./config.status $@
419MSVisualStudio/v10/nosparse/config.h: $(top_builddir)/config.status $(top_srcdir)/MSVisualStudio/v10/nosparse/config.h.in
420        cd $(top_builddir) && $(SHELL) ./config.status $@
421MSVisualStudio/v10/x64/sparse/config.h: $(top_builddir)/config.status $(top_srcdir)/MSVisualStudio/v10/x64/sparse/config.h.in
422        cd $(top_builddir) && $(SHELL) ./config.status $@
423MSVisualStudio/v10/x64/nosparse/config.h: $(top_builddir)/config.status $(top_srcdir)/MSVisualStudio/v10/x64/nosparse/config.h.in
424        cd $(top_builddir) && $(SHELL) ./config.status $@
425adolc.spec: $(top_builddir)/config.status $(srcdir)/adolc.spec.in
426        cd $(top_builddir) && $(SHELL) ./config.status $@
427
428mostlyclean-libtool:
429        -rm -f *.lo
430
431clean-libtool:
432        -rm -rf .libs _libs
433
434distclean-libtool:
435        -rm -f libtool config.lt
436
437# This directory's subdirectories are mostly independent; you can cd
438# into them and run 'make' without going through this Makefile.
439# To change the values of 'make' variables: instead of editing Makefiles,
440# (1) if the variable is set in 'config.status', edit 'config.status'
441#     (which will cause the Makefiles to be regenerated when you run 'make');
442# (2) otherwise, pass the desired values on the 'make' command line.
443$(am__recursive_targets):
444        @fail=; \
445        if $(am__make_keepgoing); then \
446          failcom='fail=yes'; \
447        else \
448          failcom='exit 1'; \
449        fi; \
450        dot_seen=no; \
451        target=`echo $@ | sed s/-recursive//`; \
452        case "$@" in \
453          distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
454          *) list='$(SUBDIRS)' ;; \
455        esac; \
456        for subdir in $$list; do \
457          echo "Making $$target in $$subdir"; \
458          if test "$$subdir" = "."; then \
459            dot_seen=yes; \
460            local_target="$$target-am"; \
461          else \
462            local_target="$$target"; \
463          fi; \
464          ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
465          || eval $$failcom; \
466        done; \
467        if test "$$dot_seen" = "no"; then \
468          $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
469        fi; test -z "$$fail"
470
471ID: $(am__tagged_files)
472        $(am__define_uniq_tagged_files); mkid -fID $$unique
473tags: tags-recursive
474TAGS: tags
475
476tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
477        set x; \
478        here=`pwd`; \
479        if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
480          include_option=--etags-include; \
481          empty_fix=.; \
482        else \
483          include_option=--include; \
484          empty_fix=; \
485        fi; \
486        list='$(SUBDIRS)'; for subdir in $$list; do \
487          if test "$$subdir" = .; then :; else \
488            test ! -f $$subdir/TAGS || \
489              set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
490          fi; \
491        done; \
492        $(am__define_uniq_tagged_files); \
493        shift; \
494        if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
495          test -n "$$unique" || unique=$$empty_fix; \
496          if test $$# -gt 0; then \
497            $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
498              "$$@" $$unique; \
499          else \
500            $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
501              $$unique; \
502          fi; \
503        fi
504ctags: ctags-recursive
505
506CTAGS: ctags
507ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
508        $(am__define_uniq_tagged_files); \
509        test -z "$(CTAGS_ARGS)$$unique" \
510          || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
511             $$unique
512
513GTAGS:
514        here=`$(am__cd) $(top_builddir) && pwd` \
515          && $(am__cd) $(top_srcdir) \
516          && gtags -i $(GTAGS_ARGS) "$$here"
517cscope: cscope.files
518        test ! -s cscope.files \
519          || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS)
520clean-cscope:
521        -rm -f cscope.files
522cscope.files: clean-cscope cscopelist
523cscopelist: cscopelist-recursive
524
525cscopelist-am: $(am__tagged_files)
526        list='$(am__tagged_files)'; \
527        case "$(srcdir)" in \
528          [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
529          *) sdir=$(subdir)/$(srcdir) ;; \
530        esac; \
531        for i in $$list; do \
532          if test -f "$$i"; then \
533            echo "$(subdir)/$$i"; \
534          else \
535            echo "$$sdir/$$i"; \
536          fi; \
537        done >> $(top_builddir)/cscope.files
538
539distclean-tags:
540        -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
541        -rm -f cscope.out cscope.in.out cscope.po.out cscope.files
542
543distdir: $(DISTFILES)
544        $(am__remove_distdir)
545        test -d "$(distdir)" || mkdir "$(distdir)"
546        @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
547        topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
548        list='$(DISTFILES)'; \
549          dist_files=`for file in $$list; do echo $$file; done | \
550          sed -e "s|^$$srcdirstrip/||;t" \
551              -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
552        case $$dist_files in \
553          */*) $(MKDIR_P) `echo "$$dist_files" | \
554                           sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
555                           sort -u` ;; \
556        esac; \
557        for file in $$dist_files; do \
558          if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
559          if test -d $$d/$$file; then \
560            dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
561            if test -d "$(distdir)/$$file"; then \
562              find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
563            fi; \
564            if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
565              cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
566              find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
567            fi; \
568            cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
569          else \
570            test -f "$(distdir)/$$file" \
571            || cp -p $$d/$$file "$(distdir)/$$file" \
572            || exit 1; \
573          fi; \
574        done
575        @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
576          if test "$$subdir" = .; then :; else \
577            $(am__make_dryrun) \
578              || test -d "$(distdir)/$$subdir" \
579              || $(MKDIR_P) "$(distdir)/$$subdir" \
580              || exit 1; \
581            dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
582            $(am__relativize); \
583            new_distdir=$$reldir; \
584            dir1=$$subdir; dir2="$(top_distdir)"; \
585            $(am__relativize); \
586            new_top_distdir=$$reldir; \
587            echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
588            echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
589            ($(am__cd) $$subdir && \
590              $(MAKE) $(AM_MAKEFLAGS) \
591                top_distdir="$$new_top_distdir" \
592                distdir="$$new_distdir" \
593                am__remove_distdir=: \
594                am__skip_length_check=: \
595                am__skip_mode_fix=: \
596                distdir) \
597              || exit 1; \
598          fi; \
599        done
600        -test -n "$(am__skip_mode_fix)" \
601        || find "$(distdir)" -type d ! -perm -755 \
602                -exec chmod u+rwx,go+rx {} \; -o \
603          ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
604          ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
605          ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
606        || chmod -R a+r "$(distdir)"
607dist-gzip: distdir
608        tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
609        $(am__post_remove_distdir)
610dist-bzip2: distdir
611        tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2
612        $(am__post_remove_distdir)
613
614dist-lzip: distdir
615        tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz
616        $(am__post_remove_distdir)
617
618dist-xz: distdir
619        tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz
620        $(am__post_remove_distdir)
621
622dist-tarZ: distdir
623        tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
624        $(am__post_remove_distdir)
625
626dist-shar: distdir
627        shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
628        $(am__post_remove_distdir)
629
630dist-zip: distdir
631        -rm -f $(distdir).zip
632        zip -rq $(distdir).zip $(distdir)
633        $(am__post_remove_distdir)
634
635dist dist-all:
636        $(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:'
637        $(am__post_remove_distdir)
638
639# This target untars the dist file and tries a VPATH configuration.  Then
640# it guarantees that the distribution is self-contained by making another
641# tarfile.
642distcheck: dist
643        case '$(DIST_ARCHIVES)' in \
644        *.tar.gz*) \
645          GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\
646        *.tar.bz2*) \
647          bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
648        *.tar.lz*) \
649          lzip -dc $(distdir).tar.lz | $(am__untar) ;;\
650        *.tar.xz*) \
651          xz -dc $(distdir).tar.xz | $(am__untar) ;;\
652        *.tar.Z*) \
653          uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
654        *.shar.gz*) \
655          GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\
656        *.zip*) \
657          unzip $(distdir).zip ;;\
658        esac
659        chmod -R a-w $(distdir)
660        chmod u+w $(distdir)
661        mkdir $(distdir)/_build $(distdir)/_inst
662        chmod a-w $(distdir)
663        test -d $(distdir)/_build || exit 0; \
664        dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
665          && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
666          && am__cwd=`pwd` \
667          && $(am__cd) $(distdir)/_build \
668          && ../configure --srcdir=.. --prefix="$$dc_install_base" \
669            $(AM_DISTCHECK_CONFIGURE_FLAGS) \
670            $(DISTCHECK_CONFIGURE_FLAGS) \
671          && $(MAKE) $(AM_MAKEFLAGS) \
672          && $(MAKE) $(AM_MAKEFLAGS) dvi \
673          && $(MAKE) $(AM_MAKEFLAGS) check \
674          && $(MAKE) $(AM_MAKEFLAGS) install \
675          && $(MAKE) $(AM_MAKEFLAGS) installcheck \
676          && $(MAKE) $(AM_MAKEFLAGS) uninstall \
677          && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
678                distuninstallcheck \
679          && chmod -R a-w "$$dc_install_base" \
680          && ({ \
681               (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
682               && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
683               && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
684               && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
685                    distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
686              } || { rm -rf "$$dc_destdir"; exit 1; }) \
687          && rm -rf "$$dc_destdir" \
688          && $(MAKE) $(AM_MAKEFLAGS) dist \
689          && rm -rf $(DIST_ARCHIVES) \
690          && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
691          && cd "$$am__cwd" \
692          || exit 1
693        $(am__post_remove_distdir)
694        @(echo "$(distdir) archives ready for distribution: "; \
695          list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
696          sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
697distuninstallcheck:
698        @test -n '$(distuninstallcheck_dir)' || { \
699          echo 'ERROR: trying to run $@ with an empty' \
700               '$$(distuninstallcheck_dir)' >&2; \
701          exit 1; \
702        }; \
703        $(am__cd) '$(distuninstallcheck_dir)' || { \
704          echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \
705          exit 1; \
706        }; \
707        test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \
708           || { echo "ERROR: files left after uninstall:" ; \
709                if test -n "$(DESTDIR)"; then \
710                  echo "  (check DESTDIR support)"; \
711                fi ; \
712                $(distuninstallcheck_listfiles) ; \
713                exit 1; } >&2
714distcleancheck: distclean
715        @if test '$(srcdir)' = . ; then \
716          echo "ERROR: distcleancheck can only run from a VPATH build" ; \
717          exit 1 ; \
718        fi
719        @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
720          || { echo "ERROR: files left in build directory after distclean:" ; \
721               $(distcleancheck_listfiles) ; \
722               exit 1; } >&2
723check-am: all-am
724check: check-recursive
725all-am: Makefile
726installdirs: installdirs-recursive
727installdirs-am:
728install: install-recursive
729install-exec: install-exec-recursive
730install-data: install-data-recursive
731uninstall: uninstall-recursive
732
733install-am: all-am
734        @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
735
736installcheck: installcheck-recursive
737install-strip:
738        if test -z '$(STRIP)'; then \
739          $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
740            install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
741              install; \
742        else \
743          $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
744            install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
745            "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
746        fi
747mostlyclean-generic:
748
749clean-generic:
750
751distclean-generic:
752        -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
753        -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
754
755maintainer-clean-generic:
756        @echo "This command is intended for maintainers to use"
757        @echo "it deletes files that may require special tools to rebuild."
758clean: clean-recursive
759
760clean-am: clean-generic clean-libtool mostlyclean-am
761
762distclean: distclean-recursive
763        -rm -f $(am__CONFIG_DISTCLEAN_FILES)
764        -rm -f Makefile
765distclean-am: clean-am distclean-generic distclean-libtool \
766        distclean-tags
767
768dvi: dvi-recursive
769
770dvi-am:
771
772html: html-recursive
773
774html-am:
775
776info: info-recursive
777
778info-am:
779
780install-data-am:
781
782install-dvi: install-dvi-recursive
783
784install-dvi-am:
785
786install-exec-am:
787
788install-html: install-html-recursive
789
790install-html-am:
791
792install-info: install-info-recursive
793
794install-info-am:
795
796install-man:
797
798install-pdf: install-pdf-recursive
799
800install-pdf-am:
801
802install-ps: install-ps-recursive
803
804install-ps-am:
805
806installcheck-am:
807
808maintainer-clean: maintainer-clean-recursive
809        -rm -f $(am__CONFIG_DISTCLEAN_FILES)
810        -rm -rf $(top_srcdir)/autom4te.cache
811        -rm -f Makefile
812maintainer-clean-am: distclean-am maintainer-clean-generic
813
814mostlyclean: mostlyclean-recursive
815
816mostlyclean-am: mostlyclean-generic mostlyclean-libtool
817
818pdf: pdf-recursive
819
820pdf-am:
821
822ps: ps-recursive
823
824ps-am:
825
826uninstall-am:
827
828.MAKE: $(am__recursive_targets) install-am install-strip
829
830.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \
831        am--refresh check check-am clean clean-cscope clean-generic \
832        clean-libtool cscope cscopelist-am ctags ctags-am dist \
833        dist-all dist-bzip2 dist-gzip dist-lzip dist-shar dist-tarZ \
834        dist-xz dist-zip distcheck distclean distclean-generic \
835        distclean-libtool distclean-tags distcleancheck distdir \
836        distuninstallcheck dvi dvi-am html html-am info info-am \
837        install install-am install-data install-data-am install-dvi \
838        install-dvi-am install-exec install-exec-am install-html \
839        install-html-am install-info install-info-am install-man \
840        install-pdf install-pdf-am install-ps install-ps-am \
841        install-strip installcheck installcheck-am installdirs \
842        installdirs-am maintainer-clean maintainer-clean-generic \
843        mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \
844        ps ps-am tags tags-am uninstall uninstall-am
845
846
847test: all
848        cd ADOL-C; $(MAKE) test
849
850.PHONY: test
851
852# Tell versions [3.59,3.63) of GNU make to not export all variables.
853# Otherwise a system limit (for SysV at least) may be exceeded.
854.NOEXPORT:
Note: See TracBrowser for help on using the repository browser.