source: trunk/Makefile.in @ 455

Last change on this file since 455 was 455, checked in by kulshres, 6 years ago

regenerate files with maintainer-mode disabled

Signed-off-by: Kshitij Kulshreshtha <kshitij@…>

File size: 27.7 KB
Line 
1# Makefile.in generated by automake 1.13.4 from Makefile.am.
2# @configure_input@
3
4# Copyright (C) 1994-2013 Free Software Foundation, Inc.
5
6# This Makefile.in is free software; the Free Software Foundation
7# gives unlimited permission to copy and/or distribute it,
8# with or without modifications, as long as this notice is preserved.
9
10# This program is distributed in the hope that it will be useful,
11# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
12# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
13# PARTICULAR PURPOSE.
14
15@SET_MAKE@
16
17##############################################################################
18##############################################################################
19VPATH = @srcdir@
20am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
21am__make_running_with_option = \
22  case $${target_option-} in \
23      ?) ;; \
24      *) echo "am__make_running_with_option: internal error: invalid" \
25              "target option '$${target_option-}' specified" >&2; \
26         exit 1;; \
27  esac; \
28  has_opt=no; \
29  sane_makeflags=$$MAKEFLAGS; \
30  if $(am__is_gnu_make); then \
31    sane_makeflags=$$MFLAGS; \
32  else \
33    case $$MAKEFLAGS in \
34      *\\[\ \   ]*) \
35        bs=\\; \
36        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
37          | sed "s/$$bs$$bs[$$bs $$bs   ]*//g"`;; \
38    esac; \
39  fi; \
40  skip_next=no; \
41  strip_trailopt () \
42  { \
43    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
44  }; \
45  for flg in $$sane_makeflags; do \
46    test $$skip_next = yes && { skip_next=no; continue; }; \
47    case $$flg in \
48      *=*|--*) continue;; \
49        -*I) strip_trailopt 'I'; skip_next=yes;; \
50      -*I?*) strip_trailopt 'I';; \
51        -*O) strip_trailopt 'O'; skip_next=yes;; \
52      -*O?*) strip_trailopt 'O';; \
53        -*l) strip_trailopt 'l'; skip_next=yes;; \
54      -*l?*) strip_trailopt 'l';; \
55      -[dEDm]) skip_next=yes;; \
56      -[JT]) skip_next=yes;; \
57    esac; \
58    case $$flg in \
59      *$$target_option*) has_opt=yes; break;; \
60    esac; \
61  done; \
62  test $$has_opt = yes
63am__make_dryrun = (target_option=n; $(am__make_running_with_option))
64am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
65pkgdatadir = $(datadir)/@PACKAGE@
66pkgincludedir = $(includedir)/@PACKAGE@
67pkglibdir = $(libdir)/@PACKAGE@
68pkglibexecdir = $(libexecdir)/@PACKAGE@
69am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
70install_sh_DATA = $(install_sh) -c -m 644
71install_sh_PROGRAM = $(install_sh) -c
72install_sh_SCRIPT = $(install_sh) -c
73INSTALL_HEADER = $(INSTALL_DATA)
74transform = $(program_transform_name)
75NORMAL_INSTALL = :
76PRE_INSTALL = :
77POST_INSTALL = :
78NORMAL_UNINSTALL = :
79PRE_UNINSTALL = :
80POST_UNINSTALL = :
81build_triplet = @build@
82host_triplet = @host@
83subdir = .
84DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am \
85        $(top_srcdir)/configure $(am__configure_deps) \
86        $(top_srcdir)/ADOL-C/doc/version.tex.in \
87        $(top_srcdir)/MSVisualStudio/v10/sparse/config.h.in \
88        $(top_srcdir)/MSVisualStudio/v10/nosparse/config.h.in \
89        $(top_srcdir)/MSVisualStudio/v10/x64/sparse/config.h.in \
90        $(top_srcdir)/MSVisualStudio/v10/x64/nosparse/config.h.in \
91        $(srcdir)/adolc.spec.in AUTHORS ChangeLog INSTALL NEWS README \
92        TODO autoconf/config.guess autoconf/config.sub \
93        autoconf/depcomp autoconf/install-sh autoconf/missing \
94        autoconf/ltmain.sh $(top_srcdir)/autoconf/config.guess \
95        $(top_srcdir)/autoconf/config.sub \
96        $(top_srcdir)/autoconf/install-sh \
97        $(top_srcdir)/autoconf/ltmain.sh \
98        $(top_srcdir)/autoconf/missing
99ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
100am__aclocal_m4_deps = $(top_srcdir)/autoconf/acx_builtin.m4 \
101        $(top_srcdir)/autoconf/ampi.m4 \
102        $(top_srcdir)/autoconf/libtool.m4 \
103        $(top_srcdir)/autoconf/ltoptions.m4 \
104        $(top_srcdir)/autoconf/ltsugar.m4 \
105        $(top_srcdir)/autoconf/ltversion.m4 \
106        $(top_srcdir)/autoconf/lt~obsolete.m4 \
107        $(top_srcdir)/autoconf/mpi.m4 $(top_srcdir)/configure.ac
108am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
109        $(ACLOCAL_M4)
110am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
111 configure.lineno config.status.lineno
112mkinstalldirs = $(install_sh) -d
113CONFIG_HEADER = $(top_builddir)/ADOL-C/src/config.h
114CONFIG_CLEAN_FILES = ADOL-C/doc/version.tex \
115        MSVisualStudio/v10/sparse/config.h \
116        MSVisualStudio/v10/nosparse/config.h \
117        MSVisualStudio/v10/x64/sparse/config.h \
118        MSVisualStudio/v10/x64/nosparse/config.h adolc.spec
119CONFIG_CLEAN_VPATH_FILES =
120AM_V_P = $(am__v_P_@AM_V@)
121am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
122am__v_P_0 = false
123am__v_P_1 = :
124AM_V_GEN = $(am__v_GEN_@AM_V@)
125am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
126am__v_GEN_0 = @echo "  GEN     " $@;
127am__v_GEN_1 =
128AM_V_at = $(am__v_at_@AM_V@)
129am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
130am__v_at_0 = @
131am__v_at_1 =
132SOURCES =
133DIST_SOURCES =
134RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
135        ctags-recursive dvi-recursive html-recursive info-recursive \
136        install-data-recursive install-dvi-recursive \
137        install-exec-recursive install-html-recursive \
138        install-info-recursive install-pdf-recursive \
139        install-ps-recursive install-recursive installcheck-recursive \
140        installdirs-recursive pdf-recursive ps-recursive \
141        tags-recursive uninstall-recursive
142am__can_run_installinfo = \
143  case $$AM_UPDATE_INFO_DIR in \
144    n|no|NO) false;; \
145    *) (install-info --version) >/dev/null 2>&1;; \
146  esac
147RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
148  distclean-recursive maintainer-clean-recursive
149am__recursive_targets = \
150  $(RECURSIVE_TARGETS) \
151  $(RECURSIVE_CLEAN_TARGETS) \
152  $(am__extra_recursive_targets)
153AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
154        cscope distdir dist dist-all distcheck
155am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
156# Read a list of newline-separated strings from the standard input,
157# and print each of them once, without duplicates.  Input order is
158# *not* preserved.
159am__uniquify_input = $(AWK) '\
160  BEGIN { nonempty = 0; } \
161  { items[$$0] = 1; nonempty = 1; } \
162  END { if (nonempty) { for (i in items) print i; }; } \
163'
164# Make sure the list of sources is unique.  This is necessary because,
165# e.g., the same source file might be shared among _SOURCES variables
166# for different programs/libraries.
167am__define_uniq_tagged_files = \
168  list='$(am__tagged_files)'; \
169  unique=`for i in $$list; do \
170    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
171  done | $(am__uniquify_input)`
172ETAGS = etags
173CTAGS = ctags
174CSCOPE = cscope
175DIST_SUBDIRS = $(SUBDIRS)
176DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
177distdir = $(PACKAGE)-$(VERSION)
178top_distdir = $(distdir)
179am__remove_distdir = \
180  if test -d "$(distdir)"; then \
181    find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
182      && rm -rf "$(distdir)" \
183      || { sleep 5 && rm -rf "$(distdir)"; }; \
184  else :; fi
185am__post_remove_distdir = $(am__remove_distdir)
186am__relativize = \
187  dir0=`pwd`; \
188  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
189  sed_rest='s,^[^/]*/*,,'; \
190  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
191  sed_butlast='s,/*[^/]*$$,,'; \
192  while test -n "$$dir1"; do \
193    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
194    if test "$$first" != "."; then \
195      if test "$$first" = ".."; then \
196        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
197        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
198      else \
199        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
200        if test "$$first2" = "$$first"; then \
201          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
202        else \
203          dir2="../$$dir2"; \
204        fi; \
205        dir0="$$dir0"/"$$first"; \
206      fi; \
207    fi; \
208    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
209  done; \
210  reldir="$$dir2"
211DIST_ARCHIVES = $(distdir).tar.gz $(distdir).tar.bz2
212GZIP_ENV = --best
213DIST_TARGETS = dist-bzip2 dist-gzip
214distuninstallcheck_listfiles = find . -type f -print
215am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \
216  | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'
217distcleancheck_listfiles = find . -type f -print
218ACLOCAL = @ACLOCAL@
219ADOLC_PATCHLEVEL = @ADOLC_PATCHLEVEL@
220ADOLC_SUBVERSION = @ADOLC_SUBVERSION@
221ADOLC_VERSION = @ADOLC_VERSION@
222ADVBRANCH = @ADVBRANCH@
223AMTAR = @AMTAR@
224AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
225AR = @AR@
226AS = @AS@
227ATRIG_ERF = @ATRIG_ERF@
228AUTOCONF = @AUTOCONF@
229AUTOHEADER = @AUTOHEADER@
230AUTOMAKE = @AUTOMAKE@
231AWK = @AWK@
232CC = @CC@
233CCDEPMODE = @CCDEPMODE@
234CFLAGS = @CFLAGS@
235COLPACK_CFLAGS = @COLPACK_CFLAGS@
236COLPACK_LIBS = @COLPACK_LIBS@
237CPP = @CPP@
238CPPFLAGS = @CPPFLAGS@
239CXX = @CXX@
240CXXCPP = @CXXCPP@
241CXXDEPMODE = @CXXDEPMODE@
242CXXFLAGS = @CXXFLAGS@
243CYGPATH_W = @CYGPATH_W@
244DEFS = @DEFS@
245DEPDIR = @DEPDIR@
246DLLTOOL = @DLLTOOL@
247DSYMUTIL = @DSYMUTIL@
248DUMPBIN = @DUMPBIN@
249ECHO_C = @ECHO_C@
250ECHO_N = @ECHO_N@
251ECHO_T = @ECHO_T@
252EGREP = @EGREP@
253EXEEXT = @EXEEXT@
254FGREP = @FGREP@
255GREP = @GREP@
256INSTALL = @INSTALL@
257INSTALL_DATA = @INSTALL_DATA@
258INSTALL_PROGRAM = @INSTALL_PROGRAM@
259INSTALL_SCRIPT = @INSTALL_SCRIPT@
260INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
261LD = @LD@
262LDFLAGS = @LDFLAGS@
263LIBOBJS = @LIBOBJS@
264LIBS = @LIBS@
265LIBTOOL = @LIBTOOL@
266LIPO = @LIPO@
267LN_S = @LN_S@
268LTLIBOBJS = @LTLIBOBJS@
269MAINT = @MAINT@
270MAKEINFO = @MAKEINFO@
271MANIFEST_TOOL = @MANIFEST_TOOL@
272MKDIR_P = @MKDIR_P@
273NM = @NM@
274NMEDIT = @NMEDIT@
275OBJDUMP = @OBJDUMP@
276OBJEXT = @OBJEXT@
277OTOOL = @OTOOL@
278OTOOL64 = @OTOOL64@
279PACKAGE = @PACKAGE@
280PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
281PACKAGE_NAME = @PACKAGE_NAME@
282PACKAGE_STRING = @PACKAGE_STRING@
283PACKAGE_TARNAME = @PACKAGE_TARNAME@
284PACKAGE_URL = @PACKAGE_URL@
285PACKAGE_VERSION = @PACKAGE_VERSION@
286PATH_SEPARATOR = @PATH_SEPARATOR@
287RANLIB = @RANLIB@
288REAL_TYPE = @REAL_TYPE@
289SED = @SED@
290SET_MAKE = @SET_MAKE@
291SHELL = @SHELL@
292STRIP = @STRIP@
293UINT_TYPE = @UINT_TYPE@
294VERSION = @VERSION@
295_lib = @_lib@
296abs_builddir = @abs_builddir@
297abs_srcdir = @abs_srcdir@
298abs_top_builddir = @abs_top_builddir@
299abs_top_srcdir = @abs_top_srcdir@
300ac_adolc_cflags = @ac_adolc_cflags@
301ac_adolc_cxxflags = @ac_adolc_cxxflags@
302ac_aux_dir = @ac_aux_dir@
303ac_ct_AR = @ac_ct_AR@
304ac_ct_CC = @ac_ct_CC@
305ac_ct_CXX = @ac_ct_CXX@
306ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
307adolclib = @adolclib@
308am__include = @am__include@
309am__leading_dot = @am__leading_dot@
310am__quote = @am__quote@
311am__tar = @am__tar@
312am__untar = @am__untar@
313bindir = @bindir@
314build = @build@
315build_alias = @build_alias@
316build_cpu = @build_cpu@
317build_os = @build_os@
318build_vendor = @build_vendor@
319builddir = @builddir@
320datadir = @datadir@
321datarootdir = @datarootdir@
322docdir = @docdir@
323dvidir = @dvidir@
324exec_prefix = @exec_prefix@
325host = @host@
326host_alias = @host_alias@
327host_cpu = @host_cpu@
328host_os = @host_os@
329host_vendor = @host_vendor@
330htmldir = @htmldir@
331includedir = @includedir@
332infodir = @infodir@
333install_sh = @install_sh@
334libdir = @libdir@
335libexecdir = @libexecdir@
336localedir = @localedir@
337localstatedir = @localstatedir@
338mandir = @mandir@
339mkdir_p = @mkdir_p@
340oldincludedir = @oldincludedir@
341pdfdir = @pdfdir@
342prefix = @prefix@
343program_transform_name = @program_transform_name@
344psdir = @psdir@
345sbindir = @sbindir@
346sharedstatedir = @sharedstatedir@
347srcdir = @srcdir@
348sysconfdir = @sysconfdir@
349target_alias = @target_alias@
350top_build_prefix = @top_build_prefix@
351top_builddir = @top_builddir@
352top_srcdir = @top_srcdir@
353ACLOCAL_AMFLAGS = -I autoconf
354AUTOMAKE_OPTIONS = foreign
355EXTRA_DIST = TODO BUGS LICENSE update_versions.sh \
356                       ADOL-C/doc/version.tex.in ADOL-C/doc/version.tex \
357                       ADOL-C/doc/adolc-manual.pdf ADOL-C/doc/adolc-manual.ps \
358                       ADOL-C/doc/adolc-manual.tex ADOL-C/doc/short_ref.pdf \
359                       ADOL-C/doc/short_ref.ps ADOL-C/doc/short_ref.tex \
360                       ADOL-C/doc/multiplexed.pdf ADOL-C/doc/multiplexed.eps \
361                       ADOL-C/doc/tapeadv.pdf ADOL-C/doc/tapeadv.eps \
362                       ADOL-C/doc/tapebasic.pdf ADOL-C/doc/tapebasic.eps \
363                       ADOL-C/doc/tap_point.pdf ADOL-C/doc/tap_point.eps \
364                       MSVisualStudio/v10/adolc.sln MSVisualStudio/v10/adolc.vcxproj \
365                       MSVisualStudio/v10/ColPack_Readme_VC++.txt \
366                       MSVisualStudio/v10/ColPack.vcxproj \
367                       MSVisualStudio/v10/sparse/config.h.in MSVisualStudio/v10/nosparse/config.h.in \
368                       MSVisualStudio/v10/x64/sparse/config.h.in MSVisualStudio/v10/x64/nosparse/config.h.in \
369                       MSVisualStudio/v10/sparse/config.h MSVisualStudio/v10/nosparse/config.h \
370                       MSVisualStudio/v10/x64/sparse/config.h MSVisualStudio/v10/x64/nosparse/config.h \
371                       MSVisualStudio/v10/Readme_VC++.txt \
372                       MSVisualStudio/v10/installer.sh \
373                       adolc.spec.in adolc.spec \
374                       update_versions.sh
375
376SUBDIRS = ADOL-C
377all: all-recursive
378
379.SUFFIXES:
380am--refresh: Makefile
381        @:
382$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
383        @for dep in $?; do \
384          case '$(am__configure_deps)' in \
385            *$$dep*) \
386              echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \
387              $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \
388                && exit 0; \
389              exit 1;; \
390          esac; \
391        done; \
392        echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
393        $(am__cd) $(top_srcdir) && \
394          $(AUTOMAKE) --foreign Makefile
395.PRECIOUS: Makefile
396Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
397        @case '$?' in \
398          *config.status*) \
399            echo ' $(SHELL) ./config.status'; \
400            $(SHELL) ./config.status;; \
401          *) \
402            echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
403            cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
404        esac;
405
406$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
407        $(SHELL) ./config.status --recheck
408
409$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
410        $(am__cd) $(srcdir) && $(AUTOCONF)
411$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
412        $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
413$(am__aclocal_m4_deps):
414ADOL-C/doc/version.tex: $(top_builddir)/config.status $(top_srcdir)/ADOL-C/doc/version.tex.in
415        cd $(top_builddir) && $(SHELL) ./config.status $@
416MSVisualStudio/v10/sparse/config.h: $(top_builddir)/config.status $(top_srcdir)/MSVisualStudio/v10/sparse/config.h.in
417        cd $(top_builddir) && $(SHELL) ./config.status $@
418MSVisualStudio/v10/nosparse/config.h: $(top_builddir)/config.status $(top_srcdir)/MSVisualStudio/v10/nosparse/config.h.in
419        cd $(top_builddir) && $(SHELL) ./config.status $@
420MSVisualStudio/v10/x64/sparse/config.h: $(top_builddir)/config.status $(top_srcdir)/MSVisualStudio/v10/x64/sparse/config.h.in
421        cd $(top_builddir) && $(SHELL) ./config.status $@
422MSVisualStudio/v10/x64/nosparse/config.h: $(top_builddir)/config.status $(top_srcdir)/MSVisualStudio/v10/x64/nosparse/config.h.in
423        cd $(top_builddir) && $(SHELL) ./config.status $@
424adolc.spec: $(top_builddir)/config.status $(srcdir)/adolc.spec.in
425        cd $(top_builddir) && $(SHELL) ./config.status $@
426
427mostlyclean-libtool:
428        -rm -f *.lo
429
430clean-libtool:
431        -rm -rf .libs _libs
432
433distclean-libtool:
434        -rm -f libtool config.lt
435
436# This directory's subdirectories are mostly independent; you can cd
437# into them and run 'make' without going through this Makefile.
438# To change the values of 'make' variables: instead of editing Makefiles,
439# (1) if the variable is set in 'config.status', edit 'config.status'
440#     (which will cause the Makefiles to be regenerated when you run 'make');
441# (2) otherwise, pass the desired values on the 'make' command line.
442$(am__recursive_targets):
443        @fail=; \
444        if $(am__make_keepgoing); then \
445          failcom='fail=yes'; \
446        else \
447          failcom='exit 1'; \
448        fi; \
449        dot_seen=no; \
450        target=`echo $@ | sed s/-recursive//`; \
451        case "$@" in \
452          distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
453          *) list='$(SUBDIRS)' ;; \
454        esac; \
455        for subdir in $$list; do \
456          echo "Making $$target in $$subdir"; \
457          if test "$$subdir" = "."; then \
458            dot_seen=yes; \
459            local_target="$$target-am"; \
460          else \
461            local_target="$$target"; \
462          fi; \
463          ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
464          || eval $$failcom; \
465        done; \
466        if test "$$dot_seen" = "no"; then \
467          $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
468        fi; test -z "$$fail"
469
470ID: $(am__tagged_files)
471        $(am__define_uniq_tagged_files); mkid -fID $$unique
472tags: tags-recursive
473TAGS: tags
474
475tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
476        set x; \
477        here=`pwd`; \
478        if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
479          include_option=--etags-include; \
480          empty_fix=.; \
481        else \
482          include_option=--include; \
483          empty_fix=; \
484        fi; \
485        list='$(SUBDIRS)'; for subdir in $$list; do \
486          if test "$$subdir" = .; then :; else \
487            test ! -f $$subdir/TAGS || \
488              set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
489          fi; \
490        done; \
491        $(am__define_uniq_tagged_files); \
492        shift; \
493        if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
494          test -n "$$unique" || unique=$$empty_fix; \
495          if test $$# -gt 0; then \
496            $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
497              "$$@" $$unique; \
498          else \
499            $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
500              $$unique; \
501          fi; \
502        fi
503ctags: ctags-recursive
504
505CTAGS: ctags
506ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
507        $(am__define_uniq_tagged_files); \
508        test -z "$(CTAGS_ARGS)$$unique" \
509          || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
510             $$unique
511
512GTAGS:
513        here=`$(am__cd) $(top_builddir) && pwd` \
514          && $(am__cd) $(top_srcdir) \
515          && gtags -i $(GTAGS_ARGS) "$$here"
516cscope: cscope.files
517        test ! -s cscope.files \
518          || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS)
519clean-cscope:
520        -rm -f cscope.files
521cscope.files: clean-cscope cscopelist
522cscopelist: cscopelist-recursive
523
524cscopelist-am: $(am__tagged_files)
525        list='$(am__tagged_files)'; \
526        case "$(srcdir)" in \
527          [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
528          *) sdir=$(subdir)/$(srcdir) ;; \
529        esac; \
530        for i in $$list; do \
531          if test -f "$$i"; then \
532            echo "$(subdir)/$$i"; \
533          else \
534            echo "$$sdir/$$i"; \
535          fi; \
536        done >> $(top_builddir)/cscope.files
537
538distclean-tags:
539        -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
540        -rm -f cscope.out cscope.in.out cscope.po.out cscope.files
541
542distdir: $(DISTFILES)
543        $(am__remove_distdir)
544        test -d "$(distdir)" || mkdir "$(distdir)"
545        @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
546        topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
547        list='$(DISTFILES)'; \
548          dist_files=`for file in $$list; do echo $$file; done | \
549          sed -e "s|^$$srcdirstrip/||;t" \
550              -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
551        case $$dist_files in \
552          */*) $(MKDIR_P) `echo "$$dist_files" | \
553                           sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
554                           sort -u` ;; \
555        esac; \
556        for file in $$dist_files; do \
557          if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
558          if test -d $$d/$$file; then \
559            dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
560            if test -d "$(distdir)/$$file"; then \
561              find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
562            fi; \
563            if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
564              cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
565              find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
566            fi; \
567            cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
568          else \
569            test -f "$(distdir)/$$file" \
570            || cp -p $$d/$$file "$(distdir)/$$file" \
571            || exit 1; \
572          fi; \
573        done
574        @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
575          if test "$$subdir" = .; then :; else \
576            $(am__make_dryrun) \
577              || test -d "$(distdir)/$$subdir" \
578              || $(MKDIR_P) "$(distdir)/$$subdir" \
579              || exit 1; \
580            dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
581            $(am__relativize); \
582            new_distdir=$$reldir; \
583            dir1=$$subdir; dir2="$(top_distdir)"; \
584            $(am__relativize); \
585            new_top_distdir=$$reldir; \
586            echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
587            echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
588            ($(am__cd) $$subdir && \
589              $(MAKE) $(AM_MAKEFLAGS) \
590                top_distdir="$$new_top_distdir" \
591                distdir="$$new_distdir" \
592                am__remove_distdir=: \
593                am__skip_length_check=: \
594                am__skip_mode_fix=: \
595                distdir) \
596              || exit 1; \
597          fi; \
598        done
599        -test -n "$(am__skip_mode_fix)" \
600        || find "$(distdir)" -type d ! -perm -755 \
601                -exec chmod u+rwx,go+rx {} \; -o \
602          ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
603          ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
604          ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
605        || chmod -R a+r "$(distdir)"
606dist-gzip: distdir
607        tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
608        $(am__post_remove_distdir)
609dist-bzip2: distdir
610        tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2
611        $(am__post_remove_distdir)
612
613dist-lzip: distdir
614        tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz
615        $(am__post_remove_distdir)
616
617dist-xz: distdir
618        tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz
619        $(am__post_remove_distdir)
620
621dist-tarZ: distdir
622        tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
623        $(am__post_remove_distdir)
624
625dist-shar: distdir
626        shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
627        $(am__post_remove_distdir)
628
629dist-zip: distdir
630        -rm -f $(distdir).zip
631        zip -rq $(distdir).zip $(distdir)
632        $(am__post_remove_distdir)
633
634dist dist-all:
635        $(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:'
636        $(am__post_remove_distdir)
637
638# This target untars the dist file and tries a VPATH configuration.  Then
639# it guarantees that the distribution is self-contained by making another
640# tarfile.
641distcheck: dist
642        case '$(DIST_ARCHIVES)' in \
643        *.tar.gz*) \
644          GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\
645        *.tar.bz2*) \
646          bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
647        *.tar.lz*) \
648          lzip -dc $(distdir).tar.lz | $(am__untar) ;;\
649        *.tar.xz*) \
650          xz -dc $(distdir).tar.xz | $(am__untar) ;;\
651        *.tar.Z*) \
652          uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
653        *.shar.gz*) \
654          GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\
655        *.zip*) \
656          unzip $(distdir).zip ;;\
657        esac
658        chmod -R a-w $(distdir)
659        chmod u+w $(distdir)
660        mkdir $(distdir)/_build $(distdir)/_inst
661        chmod a-w $(distdir)
662        test -d $(distdir)/_build || exit 0; \
663        dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
664          && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
665          && am__cwd=`pwd` \
666          && $(am__cd) $(distdir)/_build \
667          && ../configure --srcdir=.. --prefix="$$dc_install_base" \
668            $(AM_DISTCHECK_CONFIGURE_FLAGS) \
669            $(DISTCHECK_CONFIGURE_FLAGS) \
670          && $(MAKE) $(AM_MAKEFLAGS) \
671          && $(MAKE) $(AM_MAKEFLAGS) dvi \
672          && $(MAKE) $(AM_MAKEFLAGS) check \
673          && $(MAKE) $(AM_MAKEFLAGS) install \
674          && $(MAKE) $(AM_MAKEFLAGS) installcheck \
675          && $(MAKE) $(AM_MAKEFLAGS) uninstall \
676          && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
677                distuninstallcheck \
678          && chmod -R a-w "$$dc_install_base" \
679          && ({ \
680               (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
681               && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
682               && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
683               && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
684                    distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
685              } || { rm -rf "$$dc_destdir"; exit 1; }) \
686          && rm -rf "$$dc_destdir" \
687          && $(MAKE) $(AM_MAKEFLAGS) dist \
688          && rm -rf $(DIST_ARCHIVES) \
689          && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
690          && cd "$$am__cwd" \
691          || exit 1
692        $(am__post_remove_distdir)
693        @(echo "$(distdir) archives ready for distribution: "; \
694          list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
695          sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
696distuninstallcheck:
697        @test -n '$(distuninstallcheck_dir)' || { \
698          echo 'ERROR: trying to run $@ with an empty' \
699               '$$(distuninstallcheck_dir)' >&2; \
700          exit 1; \
701        }; \
702        $(am__cd) '$(distuninstallcheck_dir)' || { \
703          echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \
704          exit 1; \
705        }; \
706        test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \
707           || { echo "ERROR: files left after uninstall:" ; \
708                if test -n "$(DESTDIR)"; then \
709                  echo "  (check DESTDIR support)"; \
710                fi ; \
711                $(distuninstallcheck_listfiles) ; \
712                exit 1; } >&2
713distcleancheck: distclean
714        @if test '$(srcdir)' = . ; then \
715          echo "ERROR: distcleancheck can only run from a VPATH build" ; \
716          exit 1 ; \
717        fi
718        @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
719          || { echo "ERROR: files left in build directory after distclean:" ; \
720               $(distcleancheck_listfiles) ; \
721               exit 1; } >&2
722check-am: all-am
723check: check-recursive
724all-am: Makefile
725installdirs: installdirs-recursive
726installdirs-am:
727install: install-recursive
728install-exec: install-exec-recursive
729install-data: install-data-recursive
730uninstall: uninstall-recursive
731
732install-am: all-am
733        @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
734
735installcheck: installcheck-recursive
736install-strip:
737        if test -z '$(STRIP)'; then \
738          $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
739            install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
740              install; \
741        else \
742          $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
743            install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
744            "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
745        fi
746mostlyclean-generic:
747
748clean-generic:
749
750distclean-generic:
751        -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
752        -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
753
754maintainer-clean-generic:
755        @echo "This command is intended for maintainers to use"
756        @echo "it deletes files that may require special tools to rebuild."
757clean: clean-recursive
758
759clean-am: clean-generic clean-libtool mostlyclean-am
760
761distclean: distclean-recursive
762        -rm -f $(am__CONFIG_DISTCLEAN_FILES)
763        -rm -f Makefile
764distclean-am: clean-am distclean-generic distclean-libtool \
765        distclean-tags
766
767dvi: dvi-recursive
768
769dvi-am:
770
771html: html-recursive
772
773html-am:
774
775info: info-recursive
776
777info-am:
778
779install-data-am:
780
781install-dvi: install-dvi-recursive
782
783install-dvi-am:
784
785install-exec-am:
786
787install-html: install-html-recursive
788
789install-html-am:
790
791install-info: install-info-recursive
792
793install-info-am:
794
795install-man:
796
797install-pdf: install-pdf-recursive
798
799install-pdf-am:
800
801install-ps: install-ps-recursive
802
803install-ps-am:
804
805installcheck-am:
806
807maintainer-clean: maintainer-clean-recursive
808        -rm -f $(am__CONFIG_DISTCLEAN_FILES)
809        -rm -rf $(top_srcdir)/autom4te.cache
810        -rm -f Makefile
811maintainer-clean-am: distclean-am maintainer-clean-generic
812
813mostlyclean: mostlyclean-recursive
814
815mostlyclean-am: mostlyclean-generic mostlyclean-libtool
816
817pdf: pdf-recursive
818
819pdf-am:
820
821ps: ps-recursive
822
823ps-am:
824
825uninstall-am:
826
827.MAKE: $(am__recursive_targets) install-am install-strip
828
829.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \
830        am--refresh check check-am clean clean-cscope clean-generic \
831        clean-libtool cscope cscopelist-am ctags ctags-am dist \
832        dist-all dist-bzip2 dist-gzip dist-lzip dist-shar dist-tarZ \
833        dist-xz dist-zip distcheck distclean distclean-generic \
834        distclean-libtool distclean-tags distcleancheck distdir \
835        distuninstallcheck dvi dvi-am html html-am info info-am \
836        install install-am install-data install-data-am install-dvi \
837        install-dvi-am install-exec install-exec-am install-html \
838        install-html-am install-info install-info-am install-man \
839        install-pdf install-pdf-am install-ps install-ps-am \
840        install-strip installcheck installcheck-am installdirs \
841        installdirs-am maintainer-clean maintainer-clean-generic \
842        mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \
843        ps ps-am tags tags-am uninstall uninstall-am
844
845
846test: all
847        cd ADOL-C; $(MAKE) test
848
849# Tell versions [3.59,3.63) of GNU make to not export all variables.
850# Otherwise a system limit (for SysV at least) may be exceeded.
851.NOEXPORT:
Note: See TracBrowser for help on using the repository browser.