source: trunk/Makefile.in @ 451

Last change on this file since 451 was 451, checked in by kulshres, 7 years ago

regenerate build files

Signed-off-by: Kshitij Kulshreshtha <kshitij@…>

File size: 27.6 KB
Line 
1# Makefile.in generated by automake 1.13.4 from Makefile.am.
2# @configure_input@
3
4# Copyright (C) 1994-2013 Free Software Foundation, Inc.
5
6# This Makefile.in is free software; the Free Software Foundation
7# gives unlimited permission to copy and/or distribute it,
8# with or without modifications, as long as this notice is preserved.
9
10# This program is distributed in the hope that it will be useful,
11# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
12# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
13# PARTICULAR PURPOSE.
14
15@SET_MAKE@
16
17##############################################################################
18##############################################################################
19VPATH = @srcdir@
20am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
21am__make_running_with_option = \
22  case $${target_option-} in \
23      ?) ;; \
24      *) echo "am__make_running_with_option: internal error: invalid" \
25              "target option '$${target_option-}' specified" >&2; \
26         exit 1;; \
27  esac; \
28  has_opt=no; \
29  sane_makeflags=$$MAKEFLAGS; \
30  if $(am__is_gnu_make); then \
31    sane_makeflags=$$MFLAGS; \
32  else \
33    case $$MAKEFLAGS in \
34      *\\[\ \   ]*) \
35        bs=\\; \
36        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
37          | sed "s/$$bs$$bs[$$bs $$bs   ]*//g"`;; \
38    esac; \
39  fi; \
40  skip_next=no; \
41  strip_trailopt () \
42  { \
43    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
44  }; \
45  for flg in $$sane_makeflags; do \
46    test $$skip_next = yes && { skip_next=no; continue; }; \
47    case $$flg in \
48      *=*|--*) continue;; \
49        -*I) strip_trailopt 'I'; skip_next=yes;; \
50      -*I?*) strip_trailopt 'I';; \
51        -*O) strip_trailopt 'O'; skip_next=yes;; \
52      -*O?*) strip_trailopt 'O';; \
53        -*l) strip_trailopt 'l'; skip_next=yes;; \
54      -*l?*) strip_trailopt 'l';; \
55      -[dEDm]) skip_next=yes;; \
56      -[JT]) skip_next=yes;; \
57    esac; \
58    case $$flg in \
59      *$$target_option*) has_opt=yes; break;; \
60    esac; \
61  done; \
62  test $$has_opt = yes
63am__make_dryrun = (target_option=n; $(am__make_running_with_option))
64am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
65pkgdatadir = $(datadir)/@PACKAGE@
66pkgincludedir = $(includedir)/@PACKAGE@
67pkglibdir = $(libdir)/@PACKAGE@
68pkglibexecdir = $(libexecdir)/@PACKAGE@
69am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
70install_sh_DATA = $(install_sh) -c -m 644
71install_sh_PROGRAM = $(install_sh) -c
72install_sh_SCRIPT = $(install_sh) -c
73INSTALL_HEADER = $(INSTALL_DATA)
74transform = $(program_transform_name)
75NORMAL_INSTALL = :
76PRE_INSTALL = :
77POST_INSTALL = :
78NORMAL_UNINSTALL = :
79PRE_UNINSTALL = :
80POST_UNINSTALL = :
81build_triplet = @build@
82host_triplet = @host@
83subdir = .
84DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am \
85        $(top_srcdir)/configure $(am__configure_deps) \
86        $(top_srcdir)/ADOL-C/doc/version.tex.in \
87        $(top_srcdir)/MSVisualStudio/v10/sparse/config.h.in \
88        $(top_srcdir)/MSVisualStudio/v10/nosparse/config.h.in \
89        $(top_srcdir)/MSVisualStudio/v10/x64/sparse/config.h.in \
90        $(top_srcdir)/MSVisualStudio/v10/x64/nosparse/config.h.in \
91        $(srcdir)/adolc.spec.in AUTHORS ChangeLog INSTALL NEWS README \
92        TODO autoconf/config.guess autoconf/config.sub \
93        autoconf/depcomp autoconf/install-sh autoconf/missing \
94        autoconf/ltmain.sh $(top_srcdir)/autoconf/config.guess \
95        $(top_srcdir)/autoconf/config.sub \
96        $(top_srcdir)/autoconf/install-sh \
97        $(top_srcdir)/autoconf/ltmain.sh \
98        $(top_srcdir)/autoconf/missing
99ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
100am__aclocal_m4_deps = $(top_srcdir)/autoconf/acx_builtin.m4 \
101        $(top_srcdir)/autoconf/ampi.m4 \
102        $(top_srcdir)/autoconf/libtool.m4 \
103        $(top_srcdir)/autoconf/ltoptions.m4 \
104        $(top_srcdir)/autoconf/ltsugar.m4 \
105        $(top_srcdir)/autoconf/ltversion.m4 \
106        $(top_srcdir)/autoconf/lt~obsolete.m4 \
107        $(top_srcdir)/autoconf/mpi.m4 $(top_srcdir)/configure.ac
108am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
109        $(ACLOCAL_M4)
110am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
111 configure.lineno config.status.lineno
112mkinstalldirs = $(install_sh) -d
113CONFIG_HEADER = $(top_builddir)/ADOL-C/src/config.h
114CONFIG_CLEAN_FILES = ADOL-C/doc/version.tex \
115        MSVisualStudio/v10/sparse/config.h \
116        MSVisualStudio/v10/nosparse/config.h \
117        MSVisualStudio/v10/x64/sparse/config.h \
118        MSVisualStudio/v10/x64/nosparse/config.h adolc.spec
119CONFIG_CLEAN_VPATH_FILES =
120AM_V_P = $(am__v_P_@AM_V@)
121am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
122am__v_P_0 = false
123am__v_P_1 = :
124AM_V_GEN = $(am__v_GEN_@AM_V@)
125am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
126am__v_GEN_0 = @echo "  GEN     " $@;
127am__v_GEN_1 =
128AM_V_at = $(am__v_at_@AM_V@)
129am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
130am__v_at_0 = @
131am__v_at_1 =
132SOURCES =
133DIST_SOURCES =
134RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
135        ctags-recursive dvi-recursive html-recursive info-recursive \
136        install-data-recursive install-dvi-recursive \
137        install-exec-recursive install-html-recursive \
138        install-info-recursive install-pdf-recursive \
139        install-ps-recursive install-recursive installcheck-recursive \
140        installdirs-recursive pdf-recursive ps-recursive \
141        tags-recursive uninstall-recursive
142am__can_run_installinfo = \
143  case $$AM_UPDATE_INFO_DIR in \
144    n|no|NO) false;; \
145    *) (install-info --version) >/dev/null 2>&1;; \
146  esac
147RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
148  distclean-recursive maintainer-clean-recursive
149am__recursive_targets = \
150  $(RECURSIVE_TARGETS) \
151  $(RECURSIVE_CLEAN_TARGETS) \
152  $(am__extra_recursive_targets)
153AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
154        cscope distdir dist dist-all distcheck
155am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
156# Read a list of newline-separated strings from the standard input,
157# and print each of them once, without duplicates.  Input order is
158# *not* preserved.
159am__uniquify_input = $(AWK) '\
160  BEGIN { nonempty = 0; } \
161  { items[$$0] = 1; nonempty = 1; } \
162  END { if (nonempty) { for (i in items) print i; }; } \
163'
164# Make sure the list of sources is unique.  This is necessary because,
165# e.g., the same source file might be shared among _SOURCES variables
166# for different programs/libraries.
167am__define_uniq_tagged_files = \
168  list='$(am__tagged_files)'; \
169  unique=`for i in $$list; do \
170    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
171  done | $(am__uniquify_input)`
172ETAGS = etags
173CTAGS = ctags
174CSCOPE = cscope
175DIST_SUBDIRS = $(SUBDIRS)
176DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
177distdir = $(PACKAGE)-$(VERSION)
178top_distdir = $(distdir)
179am__remove_distdir = \
180  if test -d "$(distdir)"; then \
181    find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
182      && rm -rf "$(distdir)" \
183      || { sleep 5 && rm -rf "$(distdir)"; }; \
184  else :; fi
185am__post_remove_distdir = $(am__remove_distdir)
186am__relativize = \
187  dir0=`pwd`; \
188  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
189  sed_rest='s,^[^/]*/*,,'; \
190  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
191  sed_butlast='s,/*[^/]*$$,,'; \
192  while test -n "$$dir1"; do \
193    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
194    if test "$$first" != "."; then \
195      if test "$$first" = ".."; then \
196        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
197        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
198      else \
199        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
200        if test "$$first2" = "$$first"; then \
201          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
202        else \
203          dir2="../$$dir2"; \
204        fi; \
205        dir0="$$dir0"/"$$first"; \
206      fi; \
207    fi; \
208    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
209  done; \
210  reldir="$$dir2"
211DIST_ARCHIVES = $(distdir).tar.gz $(distdir).tar.bz2
212GZIP_ENV = --best
213DIST_TARGETS = dist-bzip2 dist-gzip
214distuninstallcheck_listfiles = find . -type f -print
215am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \
216  | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'
217distcleancheck_listfiles = find . -type f -print
218ACLOCAL = @ACLOCAL@
219ADOLC_PATCHLEVEL = @ADOLC_PATCHLEVEL@
220ADOLC_SUBVERSION = @ADOLC_SUBVERSION@
221ADOLC_VERSION = @ADOLC_VERSION@
222ADVBRANCH = @ADVBRANCH@
223AMTAR = @AMTAR@
224AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
225AR = @AR@
226AS = @AS@
227ATRIG_ERF = @ATRIG_ERF@
228AUTOCONF = @AUTOCONF@
229AUTOHEADER = @AUTOHEADER@
230AUTOMAKE = @AUTOMAKE@
231AWK = @AWK@
232CC = @CC@
233CCDEPMODE = @CCDEPMODE@
234CFLAGS = @CFLAGS@
235COLPACK_CFLAGS = @COLPACK_CFLAGS@
236COLPACK_LIBS = @COLPACK_LIBS@
237CPP = @CPP@
238CPPFLAGS = @CPPFLAGS@
239CXX = @CXX@
240CXXCPP = @CXXCPP@
241CXXDEPMODE = @CXXDEPMODE@
242CXXFLAGS = @CXXFLAGS@
243CYGPATH_W = @CYGPATH_W@
244DEFS = @DEFS@
245DEPDIR = @DEPDIR@
246DLLTOOL = @DLLTOOL@
247DSYMUTIL = @DSYMUTIL@
248DUMPBIN = @DUMPBIN@
249ECHO_C = @ECHO_C@
250ECHO_N = @ECHO_N@
251ECHO_T = @ECHO_T@
252EGREP = @EGREP@
253EXEEXT = @EXEEXT@
254FGREP = @FGREP@
255GREP = @GREP@
256INSTALL = @INSTALL@
257INSTALL_DATA = @INSTALL_DATA@
258INSTALL_PROGRAM = @INSTALL_PROGRAM@
259INSTALL_SCRIPT = @INSTALL_SCRIPT@
260INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
261LD = @LD@
262LDFLAGS = @LDFLAGS@
263LIBOBJS = @LIBOBJS@
264LIBS = @LIBS@
265LIBTOOL = @LIBTOOL@
266LIPO = @LIPO@
267LN_S = @LN_S@
268LTLIBOBJS = @LTLIBOBJS@
269MAKEINFO = @MAKEINFO@
270MANIFEST_TOOL = @MANIFEST_TOOL@
271MKDIR_P = @MKDIR_P@
272NM = @NM@
273NMEDIT = @NMEDIT@
274OBJDUMP = @OBJDUMP@
275OBJEXT = @OBJEXT@
276OTOOL = @OTOOL@
277OTOOL64 = @OTOOL64@
278PACKAGE = @PACKAGE@
279PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
280PACKAGE_NAME = @PACKAGE_NAME@
281PACKAGE_STRING = @PACKAGE_STRING@
282PACKAGE_TARNAME = @PACKAGE_TARNAME@
283PACKAGE_URL = @PACKAGE_URL@
284PACKAGE_VERSION = @PACKAGE_VERSION@
285PATH_SEPARATOR = @PATH_SEPARATOR@
286RANLIB = @RANLIB@
287REAL_TYPE = @REAL_TYPE@
288SED = @SED@
289SET_MAKE = @SET_MAKE@
290SHELL = @SHELL@
291STRIP = @STRIP@
292UINT_TYPE = @UINT_TYPE@
293VERSION = @VERSION@
294_lib = @_lib@
295abs_builddir = @abs_builddir@
296abs_srcdir = @abs_srcdir@
297abs_top_builddir = @abs_top_builddir@
298abs_top_srcdir = @abs_top_srcdir@
299ac_adolc_cflags = @ac_adolc_cflags@
300ac_adolc_cxxflags = @ac_adolc_cxxflags@
301ac_aux_dir = @ac_aux_dir@
302ac_ct_AR = @ac_ct_AR@
303ac_ct_CC = @ac_ct_CC@
304ac_ct_CXX = @ac_ct_CXX@
305ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
306adolclib = @adolclib@
307am__include = @am__include@
308am__leading_dot = @am__leading_dot@
309am__quote = @am__quote@
310am__tar = @am__tar@
311am__untar = @am__untar@
312bindir = @bindir@
313build = @build@
314build_alias = @build_alias@
315build_cpu = @build_cpu@
316build_os = @build_os@
317build_vendor = @build_vendor@
318builddir = @builddir@
319datadir = @datadir@
320datarootdir = @datarootdir@
321docdir = @docdir@
322dvidir = @dvidir@
323exec_prefix = @exec_prefix@
324host = @host@
325host_alias = @host_alias@
326host_cpu = @host_cpu@
327host_os = @host_os@
328host_vendor = @host_vendor@
329htmldir = @htmldir@
330includedir = @includedir@
331infodir = @infodir@
332install_sh = @install_sh@
333libdir = @libdir@
334libexecdir = @libexecdir@
335localedir = @localedir@
336localstatedir = @localstatedir@
337mandir = @mandir@
338mkdir_p = @mkdir_p@
339oldincludedir = @oldincludedir@
340pdfdir = @pdfdir@
341prefix = @prefix@
342program_transform_name = @program_transform_name@
343psdir = @psdir@
344sbindir = @sbindir@
345sharedstatedir = @sharedstatedir@
346srcdir = @srcdir@
347sysconfdir = @sysconfdir@
348target_alias = @target_alias@
349top_build_prefix = @top_build_prefix@
350top_builddir = @top_builddir@
351top_srcdir = @top_srcdir@
352ACLOCAL_AMFLAGS = -I autoconf
353AUTOMAKE_OPTIONS = foreign
354EXTRA_DIST = TODO BUGS LICENSE update_versions.sh \
355                       ADOL-C/doc/version.tex.in ADOL-C/doc/version.tex \
356                       ADOL-C/doc/adolc-manual.pdf ADOL-C/doc/adolc-manual.ps \
357                       ADOL-C/doc/adolc-manual.tex ADOL-C/doc/short_ref.pdf \
358                       ADOL-C/doc/short_ref.ps ADOL-C/doc/short_ref.tex \
359                       ADOL-C/doc/multiplexed.pdf ADOL-C/doc/multiplexed.eps \
360                       ADOL-C/doc/tapeadv.pdf ADOL-C/doc/tapeadv.eps \
361                       ADOL-C/doc/tapebasic.pdf ADOL-C/doc/tapebasic.eps \
362                       ADOL-C/doc/tap_point.pdf ADOL-C/doc/tap_point.eps \
363                       MSVisualStudio/v10/adolc.sln MSVisualStudio/v10/adolc.vcxproj \
364                       MSVisualStudio/v10/ColPack_Readme_VC++.txt \
365                       MSVisualStudio/v10/ColPack.vcxproj \
366                       MSVisualStudio/v10/sparse/config.h.in MSVisualStudio/v10/nosparse/config.h.in \
367                       MSVisualStudio/v10/x64/sparse/config.h.in MSVisualStudio/v10/x64/nosparse/config.h.in \
368                       MSVisualStudio/v10/sparse/config.h MSVisualStudio/v10/nosparse/config.h \
369                       MSVisualStudio/v10/x64/sparse/config.h MSVisualStudio/v10/x64/nosparse/config.h \
370                       MSVisualStudio/v10/Readme_VC++.txt \
371                       MSVisualStudio/v10/installer.sh \
372                       adolc.spec.in adolc.spec \
373                       update_versions.sh
374
375SUBDIRS = ADOL-C
376all: all-recursive
377
378.SUFFIXES:
379am--refresh: Makefile
380        @:
381$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
382        @for dep in $?; do \
383          case '$(am__configure_deps)' in \
384            *$$dep*) \
385              echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \
386              $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \
387                && exit 0; \
388              exit 1;; \
389          esac; \
390        done; \
391        echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
392        $(am__cd) $(top_srcdir) && \
393          $(AUTOMAKE) --foreign Makefile
394.PRECIOUS: Makefile
395Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
396        @case '$?' in \
397          *config.status*) \
398            echo ' $(SHELL) ./config.status'; \
399            $(SHELL) ./config.status;; \
400          *) \
401            echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
402            cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
403        esac;
404
405$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
406        $(SHELL) ./config.status --recheck
407
408$(top_srcdir)/configure:  $(am__configure_deps)
409        $(am__cd) $(srcdir) && $(AUTOCONF)
410$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
411        $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
412$(am__aclocal_m4_deps):
413ADOL-C/doc/version.tex: $(top_builddir)/config.status $(top_srcdir)/ADOL-C/doc/version.tex.in
414        cd $(top_builddir) && $(SHELL) ./config.status $@
415MSVisualStudio/v10/sparse/config.h: $(top_builddir)/config.status $(top_srcdir)/MSVisualStudio/v10/sparse/config.h.in
416        cd $(top_builddir) && $(SHELL) ./config.status $@
417MSVisualStudio/v10/nosparse/config.h: $(top_builddir)/config.status $(top_srcdir)/MSVisualStudio/v10/nosparse/config.h.in
418        cd $(top_builddir) && $(SHELL) ./config.status $@
419MSVisualStudio/v10/x64/sparse/config.h: $(top_builddir)/config.status $(top_srcdir)/MSVisualStudio/v10/x64/sparse/config.h.in
420        cd $(top_builddir) && $(SHELL) ./config.status $@
421MSVisualStudio/v10/x64/nosparse/config.h: $(top_builddir)/config.status $(top_srcdir)/MSVisualStudio/v10/x64/nosparse/config.h.in
422        cd $(top_builddir) && $(SHELL) ./config.status $@
423adolc.spec: $(top_builddir)/config.status $(srcdir)/adolc.spec.in
424        cd $(top_builddir) && $(SHELL) ./config.status $@
425
426mostlyclean-libtool:
427        -rm -f *.lo
428
429clean-libtool:
430        -rm -rf .libs _libs
431
432distclean-libtool:
433        -rm -f libtool config.lt
434
435# This directory's subdirectories are mostly independent; you can cd
436# into them and run 'make' without going through this Makefile.
437# To change the values of 'make' variables: instead of editing Makefiles,
438# (1) if the variable is set in 'config.status', edit 'config.status'
439#     (which will cause the Makefiles to be regenerated when you run 'make');
440# (2) otherwise, pass the desired values on the 'make' command line.
441$(am__recursive_targets):
442        @fail=; \
443        if $(am__make_keepgoing); then \
444          failcom='fail=yes'; \
445        else \
446          failcom='exit 1'; \
447        fi; \
448        dot_seen=no; \
449        target=`echo $@ | sed s/-recursive//`; \
450        case "$@" in \
451          distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
452          *) list='$(SUBDIRS)' ;; \
453        esac; \
454        for subdir in $$list; do \
455          echo "Making $$target in $$subdir"; \
456          if test "$$subdir" = "."; then \
457            dot_seen=yes; \
458            local_target="$$target-am"; \
459          else \
460            local_target="$$target"; \
461          fi; \
462          ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
463          || eval $$failcom; \
464        done; \
465        if test "$$dot_seen" = "no"; then \
466          $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
467        fi; test -z "$$fail"
468
469ID: $(am__tagged_files)
470        $(am__define_uniq_tagged_files); mkid -fID $$unique
471tags: tags-recursive
472TAGS: tags
473
474tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
475        set x; \
476        here=`pwd`; \
477        if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
478          include_option=--etags-include; \
479          empty_fix=.; \
480        else \
481          include_option=--include; \
482          empty_fix=; \
483        fi; \
484        list='$(SUBDIRS)'; for subdir in $$list; do \
485          if test "$$subdir" = .; then :; else \
486            test ! -f $$subdir/TAGS || \
487              set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
488          fi; \
489        done; \
490        $(am__define_uniq_tagged_files); \
491        shift; \
492        if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
493          test -n "$$unique" || unique=$$empty_fix; \
494          if test $$# -gt 0; then \
495            $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
496              "$$@" $$unique; \
497          else \
498            $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
499              $$unique; \
500          fi; \
501        fi
502ctags: ctags-recursive
503
504CTAGS: ctags
505ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
506        $(am__define_uniq_tagged_files); \
507        test -z "$(CTAGS_ARGS)$$unique" \
508          || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
509             $$unique
510
511GTAGS:
512        here=`$(am__cd) $(top_builddir) && pwd` \
513          && $(am__cd) $(top_srcdir) \
514          && gtags -i $(GTAGS_ARGS) "$$here"
515cscope: cscope.files
516        test ! -s cscope.files \
517          || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS)
518clean-cscope:
519        -rm -f cscope.files
520cscope.files: clean-cscope cscopelist
521cscopelist: cscopelist-recursive
522
523cscopelist-am: $(am__tagged_files)
524        list='$(am__tagged_files)'; \
525        case "$(srcdir)" in \
526          [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
527          *) sdir=$(subdir)/$(srcdir) ;; \
528        esac; \
529        for i in $$list; do \
530          if test -f "$$i"; then \
531            echo "$(subdir)/$$i"; \
532          else \
533            echo "$$sdir/$$i"; \
534          fi; \
535        done >> $(top_builddir)/cscope.files
536
537distclean-tags:
538        -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
539        -rm -f cscope.out cscope.in.out cscope.po.out cscope.files
540
541distdir: $(DISTFILES)
542        $(am__remove_distdir)
543        test -d "$(distdir)" || mkdir "$(distdir)"
544        @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
545        topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
546        list='$(DISTFILES)'; \
547          dist_files=`for file in $$list; do echo $$file; done | \
548          sed -e "s|^$$srcdirstrip/||;t" \
549              -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
550        case $$dist_files in \
551          */*) $(MKDIR_P) `echo "$$dist_files" | \
552                           sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
553                           sort -u` ;; \
554        esac; \
555        for file in $$dist_files; do \
556          if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
557          if test -d $$d/$$file; then \
558            dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
559            if test -d "$(distdir)/$$file"; then \
560              find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
561            fi; \
562            if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
563              cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
564              find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
565            fi; \
566            cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
567          else \
568            test -f "$(distdir)/$$file" \
569            || cp -p $$d/$$file "$(distdir)/$$file" \
570            || exit 1; \
571          fi; \
572        done
573        @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
574          if test "$$subdir" = .; then :; else \
575            $(am__make_dryrun) \
576              || test -d "$(distdir)/$$subdir" \
577              || $(MKDIR_P) "$(distdir)/$$subdir" \
578              || exit 1; \
579            dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
580            $(am__relativize); \
581            new_distdir=$$reldir; \
582            dir1=$$subdir; dir2="$(top_distdir)"; \
583            $(am__relativize); \
584            new_top_distdir=$$reldir; \
585            echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
586            echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
587            ($(am__cd) $$subdir && \
588              $(MAKE) $(AM_MAKEFLAGS) \
589                top_distdir="$$new_top_distdir" \
590                distdir="$$new_distdir" \
591                am__remove_distdir=: \
592                am__skip_length_check=: \
593                am__skip_mode_fix=: \
594                distdir) \
595              || exit 1; \
596          fi; \
597        done
598        -test -n "$(am__skip_mode_fix)" \
599        || find "$(distdir)" -type d ! -perm -755 \
600                -exec chmod u+rwx,go+rx {} \; -o \
601          ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
602          ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
603          ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
604        || chmod -R a+r "$(distdir)"
605dist-gzip: distdir
606        tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
607        $(am__post_remove_distdir)
608dist-bzip2: distdir
609        tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2
610        $(am__post_remove_distdir)
611
612dist-lzip: distdir
613        tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz
614        $(am__post_remove_distdir)
615
616dist-xz: distdir
617        tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz
618        $(am__post_remove_distdir)
619
620dist-tarZ: distdir
621        tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
622        $(am__post_remove_distdir)
623
624dist-shar: distdir
625        shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
626        $(am__post_remove_distdir)
627
628dist-zip: distdir
629        -rm -f $(distdir).zip
630        zip -rq $(distdir).zip $(distdir)
631        $(am__post_remove_distdir)
632
633dist dist-all:
634        $(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:'
635        $(am__post_remove_distdir)
636
637# This target untars the dist file and tries a VPATH configuration.  Then
638# it guarantees that the distribution is self-contained by making another
639# tarfile.
640distcheck: dist
641        case '$(DIST_ARCHIVES)' in \
642        *.tar.gz*) \
643          GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\
644        *.tar.bz2*) \
645          bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
646        *.tar.lz*) \
647          lzip -dc $(distdir).tar.lz | $(am__untar) ;;\
648        *.tar.xz*) \
649          xz -dc $(distdir).tar.xz | $(am__untar) ;;\
650        *.tar.Z*) \
651          uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
652        *.shar.gz*) \
653          GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\
654        *.zip*) \
655          unzip $(distdir).zip ;;\
656        esac
657        chmod -R a-w $(distdir)
658        chmod u+w $(distdir)
659        mkdir $(distdir)/_build $(distdir)/_inst
660        chmod a-w $(distdir)
661        test -d $(distdir)/_build || exit 0; \
662        dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
663          && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
664          && am__cwd=`pwd` \
665          && $(am__cd) $(distdir)/_build \
666          && ../configure --srcdir=.. --prefix="$$dc_install_base" \
667            $(AM_DISTCHECK_CONFIGURE_FLAGS) \
668            $(DISTCHECK_CONFIGURE_FLAGS) \
669          && $(MAKE) $(AM_MAKEFLAGS) \
670          && $(MAKE) $(AM_MAKEFLAGS) dvi \
671          && $(MAKE) $(AM_MAKEFLAGS) check \
672          && $(MAKE) $(AM_MAKEFLAGS) install \
673          && $(MAKE) $(AM_MAKEFLAGS) installcheck \
674          && $(MAKE) $(AM_MAKEFLAGS) uninstall \
675          && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
676                distuninstallcheck \
677          && chmod -R a-w "$$dc_install_base" \
678          && ({ \
679               (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
680               && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
681               && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
682               && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
683                    distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
684              } || { rm -rf "$$dc_destdir"; exit 1; }) \
685          && rm -rf "$$dc_destdir" \
686          && $(MAKE) $(AM_MAKEFLAGS) dist \
687          && rm -rf $(DIST_ARCHIVES) \
688          && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
689          && cd "$$am__cwd" \
690          || exit 1
691        $(am__post_remove_distdir)
692        @(echo "$(distdir) archives ready for distribution: "; \
693          list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
694          sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
695distuninstallcheck:
696        @test -n '$(distuninstallcheck_dir)' || { \
697          echo 'ERROR: trying to run $@ with an empty' \
698               '$$(distuninstallcheck_dir)' >&2; \
699          exit 1; \
700        }; \
701        $(am__cd) '$(distuninstallcheck_dir)' || { \
702          echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \
703          exit 1; \
704        }; \
705        test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \
706           || { echo "ERROR: files left after uninstall:" ; \
707                if test -n "$(DESTDIR)"; then \
708                  echo "  (check DESTDIR support)"; \
709                fi ; \
710                $(distuninstallcheck_listfiles) ; \
711                exit 1; } >&2
712distcleancheck: distclean
713        @if test '$(srcdir)' = . ; then \
714          echo "ERROR: distcleancheck can only run from a VPATH build" ; \
715          exit 1 ; \
716        fi
717        @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
718          || { echo "ERROR: files left in build directory after distclean:" ; \
719               $(distcleancheck_listfiles) ; \
720               exit 1; } >&2
721check-am: all-am
722check: check-recursive
723all-am: Makefile
724installdirs: installdirs-recursive
725installdirs-am:
726install: install-recursive
727install-exec: install-exec-recursive
728install-data: install-data-recursive
729uninstall: uninstall-recursive
730
731install-am: all-am
732        @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
733
734installcheck: installcheck-recursive
735install-strip:
736        if test -z '$(STRIP)'; then \
737          $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
738            install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
739              install; \
740        else \
741          $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
742            install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
743            "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
744        fi
745mostlyclean-generic:
746
747clean-generic:
748
749distclean-generic:
750        -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
751        -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
752
753maintainer-clean-generic:
754        @echo "This command is intended for maintainers to use"
755        @echo "it deletes files that may require special tools to rebuild."
756clean: clean-recursive
757
758clean-am: clean-generic clean-libtool mostlyclean-am
759
760distclean: distclean-recursive
761        -rm -f $(am__CONFIG_DISTCLEAN_FILES)
762        -rm -f Makefile
763distclean-am: clean-am distclean-generic distclean-libtool \
764        distclean-tags
765
766dvi: dvi-recursive
767
768dvi-am:
769
770html: html-recursive
771
772html-am:
773
774info: info-recursive
775
776info-am:
777
778install-data-am:
779
780install-dvi: install-dvi-recursive
781
782install-dvi-am:
783
784install-exec-am:
785
786install-html: install-html-recursive
787
788install-html-am:
789
790install-info: install-info-recursive
791
792install-info-am:
793
794install-man:
795
796install-pdf: install-pdf-recursive
797
798install-pdf-am:
799
800install-ps: install-ps-recursive
801
802install-ps-am:
803
804installcheck-am:
805
806maintainer-clean: maintainer-clean-recursive
807        -rm -f $(am__CONFIG_DISTCLEAN_FILES)
808        -rm -rf $(top_srcdir)/autom4te.cache
809        -rm -f Makefile
810maintainer-clean-am: distclean-am maintainer-clean-generic
811
812mostlyclean: mostlyclean-recursive
813
814mostlyclean-am: mostlyclean-generic mostlyclean-libtool
815
816pdf: pdf-recursive
817
818pdf-am:
819
820ps: ps-recursive
821
822ps-am:
823
824uninstall-am:
825
826.MAKE: $(am__recursive_targets) install-am install-strip
827
828.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \
829        am--refresh check check-am clean clean-cscope clean-generic \
830        clean-libtool cscope cscopelist-am ctags ctags-am dist \
831        dist-all dist-bzip2 dist-gzip dist-lzip dist-shar dist-tarZ \
832        dist-xz dist-zip distcheck distclean distclean-generic \
833        distclean-libtool distclean-tags distcleancheck distdir \
834        distuninstallcheck dvi dvi-am html html-am info info-am \
835        install install-am install-data install-data-am install-dvi \
836        install-dvi-am install-exec install-exec-am install-html \
837        install-html-am install-info install-info-am install-man \
838        install-pdf install-pdf-am install-ps install-ps-am \
839        install-strip installcheck installcheck-am installdirs \
840        installdirs-am maintainer-clean maintainer-clean-generic \
841        mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \
842        ps ps-am tags tags-am uninstall uninstall-am
843
844
845test: all
846        cd ADOL-C; $(MAKE) test
847
848# Tell versions [3.59,3.63) of GNU make to not export all variables.
849# Otherwise a system limit (for SysV at least) may be exceeded.
850.NOEXPORT:
Note: See TracBrowser for help on using the repository browser.