source: trunk/Makefile.in

Last change on this file was 792, checked in by kulshres, 10 months ago

regenerate files

File size: 31.7 KB
Line 
1# Makefile.in generated by automake 1.15 from Makefile.am.
2# @configure_input@
3
4# Copyright (C) 1994-2014 Free Software Foundation, Inc.
5
6# This Makefile.in is free software; the Free Software Foundation
7# gives unlimited permission to copy and/or distribute it,
8# with or without modifications, as long as this notice is preserved.
9
10# This program is distributed in the hope that it will be useful,
11# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
12# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
13# PARTICULAR PURPOSE.
14
15@SET_MAKE@
16
17##############################################################################
18##############################################################################
19
20VPATH = @srcdir@
21am__is_gnu_make = { \
22  if test -z '$(MAKELEVEL)'; then \
23    false; \
24  elif test -n '$(MAKE_HOST)'; then \
25    true; \
26  elif test -n '$(MAKE_VERSION)' && test -n '$(CURDIR)'; then \
27    true; \
28  else \
29    false; \
30  fi; \
31}
32am__make_running_with_option = \
33  case $${target_option-} in \
34      ?) ;; \
35      *) echo "am__make_running_with_option: internal error: invalid" \
36              "target option '$${target_option-}' specified" >&2; \
37         exit 1;; \
38  esac; \
39  has_opt=no; \
40  sane_makeflags=$$MAKEFLAGS; \
41  if $(am__is_gnu_make); then \
42    sane_makeflags=$$MFLAGS; \
43  else \
44    case $$MAKEFLAGS in \
45      *\\[\ \   ]*) \
46        bs=\\; \
47        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
48          | sed "s/$$bs$$bs[$$bs $$bs   ]*//g"`;; \
49    esac; \
50  fi; \
51  skip_next=no; \
52  strip_trailopt () \
53  { \
54    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
55  }; \
56  for flg in $$sane_makeflags; do \
57    test $$skip_next = yes && { skip_next=no; continue; }; \
58    case $$flg in \
59      *=*|--*) continue;; \
60        -*I) strip_trailopt 'I'; skip_next=yes;; \
61      -*I?*) strip_trailopt 'I';; \
62        -*O) strip_trailopt 'O'; skip_next=yes;; \
63      -*O?*) strip_trailopt 'O';; \
64        -*l) strip_trailopt 'l'; skip_next=yes;; \
65      -*l?*) strip_trailopt 'l';; \
66      -[dEDm]) skip_next=yes;; \
67      -[JT]) skip_next=yes;; \
68    esac; \
69    case $$flg in \
70      *$$target_option*) has_opt=yes; break;; \
71    esac; \
72  done; \
73  test $$has_opt = yes
74am__make_dryrun = (target_option=n; $(am__make_running_with_option))
75am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
76pkgdatadir = $(datadir)/@PACKAGE@
77pkgincludedir = $(includedir)/@PACKAGE@
78pkglibdir = $(libdir)/@PACKAGE@
79pkglibexecdir = $(libexecdir)/@PACKAGE@
80am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
81install_sh_DATA = $(install_sh) -c -m 644
82install_sh_PROGRAM = $(install_sh) -c
83install_sh_SCRIPT = $(install_sh) -c
84INSTALL_HEADER = $(INSTALL_DATA)
85transform = $(program_transform_name)
86NORMAL_INSTALL = :
87PRE_INSTALL = :
88POST_INSTALL = :
89NORMAL_UNINSTALL = :
90PRE_UNINSTALL = :
91POST_UNINSTALL = :
92build_triplet = @build@
93host_triplet = @host@
94subdir = .
95ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
96am__aclocal_m4_deps = $(top_srcdir)/autoconf/acx_builtin.m4 \
97        $(top_srcdir)/autoconf/ampi.m4 \
98        $(top_srcdir)/autoconf/ax_boost_base.m4 \
99        $(top_srcdir)/autoconf/ax_boost_system.m4 \
100        $(top_srcdir)/autoconf/colpack.m4 \
101        $(top_srcdir)/autoconf/libtool.m4 \
102        $(top_srcdir)/autoconf/ltoptions.m4 \
103        $(top_srcdir)/autoconf/ltsugar.m4 \
104        $(top_srcdir)/autoconf/ltversion.m4 \
105        $(top_srcdir)/autoconf/lt~obsolete.m4 \
106        $(top_srcdir)/autoconf/medipack.m4 \
107        $(top_srcdir)/autoconf/mpi.m4 \
108        $(top_srcdir)/autoconf/stdcxx_11.m4 $(top_srcdir)/configure.ac
109am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
110        $(ACLOCAL_M4)
111DIST_COMMON = $(srcdir)/Makefile.am $(top_srcdir)/configure \
112        $(am__configure_deps) $(am__DIST_COMMON)
113am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
114 configure.lineno config.status.lineno
115mkinstalldirs = $(install_sh) -d
116CONFIG_HEADER = $(top_builddir)/ADOL-C/src/config.h
117CONFIG_CLEAN_FILES = ADOL-C/doc/version.tex \
118        MSVisualStudio/v14/sparse/config.h \
119        MSVisualStudio/v14/nosparse/config.h \
120        MSVisualStudio/v14/x64/sparse/config.h \
121        MSVisualStudio/v14/x64/nosparse/config.h adolc.spec \
122        adolclib.pc
123CONFIG_CLEAN_VPATH_FILES =
124AM_V_P = $(am__v_P_@AM_V@)
125am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
126am__v_P_0 = false
127am__v_P_1 = :
128AM_V_GEN = $(am__v_GEN_@AM_V@)
129am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
130am__v_GEN_0 = @echo "  GEN     " $@;
131am__v_GEN_1 =
132AM_V_at = $(am__v_at_@AM_V@)
133am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
134am__v_at_0 = @
135am__v_at_1 =
136SOURCES =
137DIST_SOURCES =
138RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
139        ctags-recursive dvi-recursive html-recursive info-recursive \
140        install-data-recursive install-dvi-recursive \
141        install-exec-recursive install-html-recursive \
142        install-info-recursive install-pdf-recursive \
143        install-ps-recursive install-recursive installcheck-recursive \
144        installdirs-recursive pdf-recursive ps-recursive \
145        tags-recursive uninstall-recursive
146am__can_run_installinfo = \
147  case $$AM_UPDATE_INFO_DIR in \
148    n|no|NO) false;; \
149    *) (install-info --version) >/dev/null 2>&1;; \
150  esac
151am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
152am__vpath_adj = case $$p in \
153    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
154    *) f=$$p;; \
155  esac;
156am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
157am__install_max = 40
158am__nobase_strip_setup = \
159  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
160am__nobase_strip = \
161  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
162am__nobase_list = $(am__nobase_strip_setup); \
163  for p in $$list; do echo "$$p $$p"; done | \
164  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
165  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
166    if (++n[$$2] == $(am__install_max)) \
167      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
168    END { for (dir in files) print dir, files[dir] }'
169am__base_list = \
170  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
171  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
172am__uninstall_files_from_dir = { \
173  test -z "$$files" \
174    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
175    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
176         $(am__cd) "$$dir" && rm -f $$files; }; \
177  }
178am__installdirs = "$(DESTDIR)$(pkgconfigdir)"
179DATA = $(pkgconfig_DATA)
180RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
181  distclean-recursive maintainer-clean-recursive
182am__recursive_targets = \
183  $(RECURSIVE_TARGETS) \
184  $(RECURSIVE_CLEAN_TARGETS) \
185  $(am__extra_recursive_targets)
186AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
187        cscope distdir dist dist-all distcheck
188am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
189# Read a list of newline-separated strings from the standard input,
190# and print each of them once, without duplicates.  Input order is
191# *not* preserved.
192am__uniquify_input = $(AWK) '\
193  BEGIN { nonempty = 0; } \
194  { items[$$0] = 1; nonempty = 1; } \
195  END { if (nonempty) { for (i in items) print i; }; } \
196'
197# Make sure the list of sources is unique.  This is necessary because,
198# e.g., the same source file might be shared among _SOURCES variables
199# for different programs/libraries.
200am__define_uniq_tagged_files = \
201  list='$(am__tagged_files)'; \
202  unique=`for i in $$list; do \
203    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
204  done | $(am__uniquify_input)`
205ETAGS = etags
206CTAGS = ctags
207CSCOPE = cscope
208DIST_SUBDIRS = $(SUBDIRS)
209am__DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/adolc.spec.in \
210        $(srcdir)/adolclib.pc.in \
211        $(top_srcdir)/ADOL-C/doc/version.tex.in \
212        $(top_srcdir)/MSVisualStudio/v14/nosparse/config.h.in \
213        $(top_srcdir)/MSVisualStudio/v14/sparse/config.h.in \
214        $(top_srcdir)/MSVisualStudio/v14/x64/nosparse/config.h.in \
215        $(top_srcdir)/MSVisualStudio/v14/x64/sparse/config.h.in \
216        $(top_srcdir)/autoconf/compile \
217        $(top_srcdir)/autoconf/config.guess \
218        $(top_srcdir)/autoconf/config.sub \
219        $(top_srcdir)/autoconf/install-sh \
220        $(top_srcdir)/autoconf/ltmain.sh \
221        $(top_srcdir)/autoconf/missing AUTHORS ChangeLog INSTALL NEWS \
222        README TODO autoconf/compile autoconf/config.guess \
223        autoconf/config.sub autoconf/depcomp autoconf/install-sh \
224        autoconf/ltmain.sh autoconf/missing
225DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
226distdir = $(PACKAGE)-$(VERSION)
227top_distdir = $(distdir)
228am__remove_distdir = \
229  if test -d "$(distdir)"; then \
230    find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
231      && rm -rf "$(distdir)" \
232      || { sleep 5 && rm -rf "$(distdir)"; }; \
233  else :; fi
234am__post_remove_distdir = $(am__remove_distdir)
235am__relativize = \
236  dir0=`pwd`; \
237  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
238  sed_rest='s,^[^/]*/*,,'; \
239  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
240  sed_butlast='s,/*[^/]*$$,,'; \
241  while test -n "$$dir1"; do \
242    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
243    if test "$$first" != "."; then \
244      if test "$$first" = ".."; then \
245        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
246        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
247      else \
248        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
249        if test "$$first2" = "$$first"; then \
250          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
251        else \
252          dir2="../$$dir2"; \
253        fi; \
254        dir0="$$dir0"/"$$first"; \
255      fi; \
256    fi; \
257    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
258  done; \
259  reldir="$$dir2"
260DIST_ARCHIVES = $(distdir).tar.gz $(distdir).tar.bz2
261GZIP_ENV = --best
262DIST_TARGETS = dist-bzip2 dist-gzip
263distuninstallcheck_listfiles = find . -type f -print
264am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \
265  | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'
266distcleancheck_listfiles = find . -type f -print
267ACLOCAL = @ACLOCAL@
268ADOLC_PATCHLEVEL = @ADOLC_PATCHLEVEL@
269ADOLC_SUBVERSION = @ADOLC_SUBVERSION@
270ADOLC_VERSION = @ADOLC_VERSION@
271ADTL_REFCNT = @ADTL_REFCNT@
272ADVBRANCH = @ADVBRANCH@
273AMTAR = @AMTAR@
274AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
275AR = @AR@
276AS = @AS@
277ATRIG_ERF = @ATRIG_ERF@
278AUTOCONF = @AUTOCONF@
279AUTOHEADER = @AUTOHEADER@
280AUTOMAKE = @AUTOMAKE@
281AWK = @AWK@
282BOOST_CPPFLAGS = @BOOST_CPPFLAGS@
283BOOST_LDFLAGS = @BOOST_LDFLAGS@
284BOOST_SYSTEM_LIB = @BOOST_SYSTEM_LIB@
285CC = @CC@
286CCDEPMODE = @CCDEPMODE@
287CFLAGS = @CFLAGS@
288CPP = @CPP@
289CPPFLAGS = @CPPFLAGS@
290CXX = @CXX@
291CXXCPP = @CXXCPP@
292CXXDEPMODE = @CXXDEPMODE@
293CXXFLAGS = @CXXFLAGS@
294CYGPATH_W = @CYGPATH_W@
295DEFS = @DEFS@
296DEPDIR = @DEPDIR@
297DLLTOOL = @DLLTOOL@
298DSYMUTIL = @DSYMUTIL@
299DUMPBIN = @DUMPBIN@
300ECHO_C = @ECHO_C@
301ECHO_N = @ECHO_N@
302ECHO_T = @ECHO_T@
303EGREP = @EGREP@
304EXEEXT = @EXEEXT@
305FGREP = @FGREP@
306GREP = @GREP@
307HAVE_CXX11 = @HAVE_CXX11@
308INSTALL = @INSTALL@
309INSTALL_DATA = @INSTALL_DATA@
310INSTALL_PROGRAM = @INSTALL_PROGRAM@
311INSTALL_SCRIPT = @INSTALL_SCRIPT@
312INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
313LD = @LD@
314LDFLAGS = @LDFLAGS@
315LIBOBJS = @LIBOBJS@
316LIBS = @LIBS@
317LIBTOOL = @LIBTOOL@
318LIPO = @LIPO@
319LN_S = @LN_S@
320LTLIBOBJS = @LTLIBOBJS@
321LT_SYS_LIBRARY_PATH = @LT_SYS_LIBRARY_PATH@
322MAINT = @MAINT@
323MAKEINFO = @MAKEINFO@
324MANIFEST_TOOL = @MANIFEST_TOOL@
325MKDIR_P = @MKDIR_P@
326NM = @NM@
327NMEDIT = @NMEDIT@
328OBJDUMP = @OBJDUMP@
329OBJEXT = @OBJEXT@
330OTOOL = @OTOOL@
331OTOOL64 = @OTOOL64@
332PACKAGE = @PACKAGE@
333PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
334PACKAGE_NAME = @PACKAGE_NAME@
335PACKAGE_STRING = @PACKAGE_STRING@
336PACKAGE_TARNAME = @PACKAGE_TARNAME@
337PACKAGE_URL = @PACKAGE_URL@
338PACKAGE_VERSION = @PACKAGE_VERSION@
339PATH_SEPARATOR = @PATH_SEPARATOR@
340PYTHON = @PYTHON@
341PYTHON_EXEC_PREFIX = @PYTHON_EXEC_PREFIX@
342PYTHON_PLATFORM = @PYTHON_PLATFORM@
343PYTHON_PREFIX = @PYTHON_PREFIX@
344PYTHON_VERSION = @PYTHON_VERSION@
345RANLIB = @RANLIB@
346REAL_TYPE = @REAL_TYPE@
347SED = @SED@
348SET_MAKE = @SET_MAKE@
349SHELL = @SHELL@
350SPARSE_DRIVERS = @SPARSE_DRIVERS@
351STRIP = @STRIP@
352SWIG = @SWIG@
353UINT_TYPE = @UINT_TYPE@
354USE_BOOST_POOL = @USE_BOOST_POOL@
355VERSION = @VERSION@
356_lib = @_lib@
357abs_builddir = @abs_builddir@
358abs_srcdir = @abs_srcdir@
359abs_top_builddir = @abs_top_builddir@
360abs_top_srcdir = @abs_top_srcdir@
361ac_adolc_cflags = @ac_adolc_cflags@
362ac_adolc_cxxflags = @ac_adolc_cxxflags@
363ac_aux_dir = @ac_aux_dir@
364ac_ct_AR = @ac_ct_AR@
365ac_ct_CC = @ac_ct_CC@
366ac_ct_CXX = @ac_ct_CXX@
367ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
368adolclib = @adolclib@
369am__include = @am__include@
370am__leading_dot = @am__leading_dot@
371am__quote = @am__quote@
372am__tar = @am__tar@
373am__untar = @am__untar@
374bindir = @bindir@
375build = @build@
376build_alias = @build_alias@
377build_cpu = @build_cpu@
378build_os = @build_os@
379build_vendor = @build_vendor@
380builddir = @builddir@
381datadir = @datadir@
382datarootdir = @datarootdir@
383docdir = @docdir@
384dvidir = @dvidir@
385exec_prefix = @exec_prefix@
386host = @host@
387host_alias = @host_alias@
388host_cpu = @host_cpu@
389host_os = @host_os@
390host_vendor = @host_vendor@
391htmldir = @htmldir@
392includedir = @includedir@
393infodir = @infodir@
394install_sh = @install_sh@
395libdir = @libdir@
396libexecdir = @libexecdir@
397localedir = @localedir@
398localstatedir = @localstatedir@
399mandir = @mandir@
400mkdir_p = @mkdir_p@
401oldincludedir = @oldincludedir@
402pdfdir = @pdfdir@
403pkgpyexecdir = @pkgpyexecdir@
404pkgpythondir = @pkgpythondir@
405prefix = @prefix@
406program_transform_name = @program_transform_name@
407psdir = @psdir@
408pyexecdir = @pyexecdir@
409pythondir = @pythondir@
410runstatedir = @runstatedir@
411saveCC = @saveCC@
412saveCXX = @saveCXX@
413sbindir = @sbindir@
414sharedstatedir = @sharedstatedir@
415srcdir = @srcdir@
416sysconfdir = @sysconfdir@
417target_alias = @target_alias@
418top_build_prefix = @top_build_prefix@
419top_builddir = @top_builddir@
420top_srcdir = @top_srcdir@
421ACLOCAL_AMFLAGS = -I autoconf
422AUTOMAKE_OPTIONS = foreign
423EXTRA_DIST = TODO BUGS LICENSE update_versions.sh \
424                       ADOL-C/doc/version.tex.in ADOL-C/doc/version.tex \
425                       ADOL-C/doc/adolc-manual.pdf ADOL-C/doc/adolc-manual.ps \
426                       ADOL-C/doc/adolc-manual.tex ADOL-C/doc/short_ref.pdf \
427                       ADOL-C/doc/short_ref.ps ADOL-C/doc/short_ref.tex \
428                       ADOL-C/doc/multiplexed.pdf ADOL-C/doc/multiplexed.eps \
429                       ADOL-C/doc/tapeadv.pdf ADOL-C/doc/tapeadv.eps \
430                       ADOL-C/doc/tapebasic.pdf ADOL-C/doc/tapebasic.eps \
431                       ADOL-C/doc/tap_point.pdf ADOL-C/doc/tap_point.eps \
432                       MSVisualStudio/v14/adolc.sln MSVisualStudio/v14/adolc.vcxproj \
433                       MSVisualStudio/v14/ColPack_Readme_VC++.txt \
434                       MSVisualStudio/v14/ColPack.vcxproj \
435                       MSVisualStudio/v14/sparse/config.h.in MSVisualStudio/v14/nosparse/config.h.in \
436                       MSVisualStudio/v14/x64/sparse/config.h.in MSVisualStudio/v14/x64/nosparse/config.h.in \
437                       MSVisualStudio/v14/sparse/config.h MSVisualStudio/v14/nosparse/config.h \
438                       MSVisualStudio/v14/x64/sparse/config.h MSVisualStudio/v14/x64/nosparse/config.h \
439                       MSVisualStudio/v14/Readme_VC++.txt \
440                       MSVisualStudio/v14/installer.sh \
441                       adolc.spec.in adolc.spec \
442                       update_versions.sh
443
444SUBDIRS = ADOL-C
445
446# install pkg-config information
447pkgconfigdir = $(libdir)/pkgconfig
448pkgconfig_DATA = @adolclib@.pc
449all: all-recursive
450
451.SUFFIXES:
452am--refresh: Makefile
453        @:
454$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
455        @for dep in $?; do \
456          case '$(am__configure_deps)' in \
457            *$$dep*) \
458              echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \
459              $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \
460                && exit 0; \
461              exit 1;; \
462          esac; \
463        done; \
464        echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
465        $(am__cd) $(top_srcdir) && \
466          $(AUTOMAKE) --foreign Makefile
467Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
468        @case '$?' in \
469          *config.status*) \
470            echo ' $(SHELL) ./config.status'; \
471            $(SHELL) ./config.status;; \
472          *) \
473            echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
474            cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
475        esac;
476
477$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
478        $(SHELL) ./config.status --recheck
479
480$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
481        $(am__cd) $(srcdir) && $(AUTOCONF)
482$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
483        $(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
484$(am__aclocal_m4_deps):
485ADOL-C/doc/version.tex: $(top_builddir)/config.status $(top_srcdir)/ADOL-C/doc/version.tex.in
486        cd $(top_builddir) && $(SHELL) ./config.status $@
487MSVisualStudio/v14/sparse/config.h: $(top_builddir)/config.status $(top_srcdir)/MSVisualStudio/v14/sparse/config.h.in
488        cd $(top_builddir) && $(SHELL) ./config.status $@
489MSVisualStudio/v14/nosparse/config.h: $(top_builddir)/config.status $(top_srcdir)/MSVisualStudio/v14/nosparse/config.h.in
490        cd $(top_builddir) && $(SHELL) ./config.status $@
491MSVisualStudio/v14/x64/sparse/config.h: $(top_builddir)/config.status $(top_srcdir)/MSVisualStudio/v14/x64/sparse/config.h.in
492        cd $(top_builddir) && $(SHELL) ./config.status $@
493MSVisualStudio/v14/x64/nosparse/config.h: $(top_builddir)/config.status $(top_srcdir)/MSVisualStudio/v14/x64/nosparse/config.h.in
494        cd $(top_builddir) && $(SHELL) ./config.status $@
495adolc.spec: $(top_builddir)/config.status $(srcdir)/adolc.spec.in
496        cd $(top_builddir) && $(SHELL) ./config.status $@
497adolclib.pc: $(top_builddir)/config.status $(srcdir)/adolclib.pc.in
498        cd $(top_builddir) && $(SHELL) ./config.status $@
499
500mostlyclean-libtool:
501        -rm -f *.lo
502
503clean-libtool:
504        -rm -rf .libs _libs
505
506distclean-libtool:
507        -rm -f libtool config.lt
508install-pkgconfigDATA: $(pkgconfig_DATA)
509        @$(NORMAL_INSTALL)
510        @list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \
511        if test -n "$$list"; then \
512          echo " $(MKDIR_P) '$(DESTDIR)$(pkgconfigdir)'"; \
513          $(MKDIR_P) "$(DESTDIR)$(pkgconfigdir)" || exit 1; \
514        fi; \
515        for p in $$list; do \
516          if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
517          echo "$$d$$p"; \
518        done | $(am__base_list) | \
519        while read files; do \
520          echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(pkgconfigdir)'"; \
521          $(INSTALL_DATA) $$files "$(DESTDIR)$(pkgconfigdir)" || exit $$?; \
522        done
523
524uninstall-pkgconfigDATA:
525        @$(NORMAL_UNINSTALL)
526        @list='$(pkgconfig_DATA)'; test -n "$(pkgconfigdir)" || list=; \
527        files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
528        dir='$(DESTDIR)$(pkgconfigdir)'; $(am__uninstall_files_from_dir)
529
530# This directory's subdirectories are mostly independent; you can cd
531# into them and run 'make' without going through this Makefile.
532# To change the values of 'make' variables: instead of editing Makefiles,
533# (1) if the variable is set in 'config.status', edit 'config.status'
534#     (which will cause the Makefiles to be regenerated when you run 'make');
535# (2) otherwise, pass the desired values on the 'make' command line.
536$(am__recursive_targets):
537        @fail=; \
538        if $(am__make_keepgoing); then \
539          failcom='fail=yes'; \
540        else \
541          failcom='exit 1'; \
542        fi; \
543        dot_seen=no; \
544        target=`echo $@ | sed s/-recursive//`; \
545        case "$@" in \
546          distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
547          *) list='$(SUBDIRS)' ;; \
548        esac; \
549        for subdir in $$list; do \
550          echo "Making $$target in $$subdir"; \
551          if test "$$subdir" = "."; then \
552            dot_seen=yes; \
553            local_target="$$target-am"; \
554          else \
555            local_target="$$target"; \
556          fi; \
557          ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
558          || eval $$failcom; \
559        done; \
560        if test "$$dot_seen" = "no"; then \
561          $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
562        fi; test -z "$$fail"
563
564ID: $(am__tagged_files)
565        $(am__define_uniq_tagged_files); mkid -fID $$unique
566tags: tags-recursive
567TAGS: tags
568
569tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
570        set x; \
571        here=`pwd`; \
572        if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
573          include_option=--etags-include; \
574          empty_fix=.; \
575        else \
576          include_option=--include; \
577          empty_fix=; \
578        fi; \
579        list='$(SUBDIRS)'; for subdir in $$list; do \
580          if test "$$subdir" = .; then :; else \
581            test ! -f $$subdir/TAGS || \
582              set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
583          fi; \
584        done; \
585        $(am__define_uniq_tagged_files); \
586        shift; \
587        if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
588          test -n "$$unique" || unique=$$empty_fix; \
589          if test $$# -gt 0; then \
590            $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
591              "$$@" $$unique; \
592          else \
593            $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
594              $$unique; \
595          fi; \
596        fi
597ctags: ctags-recursive
598
599CTAGS: ctags
600ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
601        $(am__define_uniq_tagged_files); \
602        test -z "$(CTAGS_ARGS)$$unique" \
603          || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
604             $$unique
605
606GTAGS:
607        here=`$(am__cd) $(top_builddir) && pwd` \
608          && $(am__cd) $(top_srcdir) \
609          && gtags -i $(GTAGS_ARGS) "$$here"
610cscope: cscope.files
611        test ! -s cscope.files \
612          || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS)
613clean-cscope:
614        -rm -f cscope.files
615cscope.files: clean-cscope cscopelist
616cscopelist: cscopelist-recursive
617
618cscopelist-am: $(am__tagged_files)
619        list='$(am__tagged_files)'; \
620        case "$(srcdir)" in \
621          [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
622          *) sdir=$(subdir)/$(srcdir) ;; \
623        esac; \
624        for i in $$list; do \
625          if test -f "$$i"; then \
626            echo "$(subdir)/$$i"; \
627          else \
628            echo "$$sdir/$$i"; \
629          fi; \
630        done >> $(top_builddir)/cscope.files
631
632distclean-tags:
633        -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
634        -rm -f cscope.out cscope.in.out cscope.po.out cscope.files
635
636distdir: $(DISTFILES)
637        $(am__remove_distdir)
638        test -d "$(distdir)" || mkdir "$(distdir)"
639        @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
640        topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
641        list='$(DISTFILES)'; \
642          dist_files=`for file in $$list; do echo $$file; done | \
643          sed -e "s|^$$srcdirstrip/||;t" \
644              -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
645        case $$dist_files in \
646          */*) $(MKDIR_P) `echo "$$dist_files" | \
647                           sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
648                           sort -u` ;; \
649        esac; \
650        for file in $$dist_files; do \
651          if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
652          if test -d $$d/$$file; then \
653            dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
654            if test -d "$(distdir)/$$file"; then \
655              find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
656            fi; \
657            if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
658              cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
659              find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
660            fi; \
661            cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
662          else \
663            test -f "$(distdir)/$$file" \
664            || cp -p $$d/$$file "$(distdir)/$$file" \
665            || exit 1; \
666          fi; \
667        done
668        @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
669          if test "$$subdir" = .; then :; else \
670            $(am__make_dryrun) \
671              || test -d "$(distdir)/$$subdir" \
672              || $(MKDIR_P) "$(distdir)/$$subdir" \
673              || exit 1; \
674            dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
675            $(am__relativize); \
676            new_distdir=$$reldir; \
677            dir1=$$subdir; dir2="$(top_distdir)"; \
678            $(am__relativize); \
679            new_top_distdir=$$reldir; \
680            echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
681            echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
682            ($(am__cd) $$subdir && \
683              $(MAKE) $(AM_MAKEFLAGS) \
684                top_distdir="$$new_top_distdir" \
685                distdir="$$new_distdir" \
686                am__remove_distdir=: \
687                am__skip_length_check=: \
688                am__skip_mode_fix=: \
689                distdir) \
690              || exit 1; \
691          fi; \
692        done
693        -test -n "$(am__skip_mode_fix)" \
694        || find "$(distdir)" -type d ! -perm -755 \
695                -exec chmod u+rwx,go+rx {} \; -o \
696          ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
697          ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
698          ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
699        || chmod -R a+r "$(distdir)"
700dist-gzip: distdir
701        tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
702        $(am__post_remove_distdir)
703dist-bzip2: distdir
704        tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2
705        $(am__post_remove_distdir)
706
707dist-lzip: distdir
708        tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz
709        $(am__post_remove_distdir)
710
711dist-xz: distdir
712        tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz
713        $(am__post_remove_distdir)
714
715dist-tarZ: distdir
716        @echo WARNING: "Support for distribution archives compressed with" \
717                       "legacy program 'compress' is deprecated." >&2
718        @echo WARNING: "It will be removed altogether in Automake 2.0" >&2
719        tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
720        $(am__post_remove_distdir)
721
722dist-shar: distdir
723        @echo WARNING: "Support for shar distribution archives is" \
724                       "deprecated." >&2
725        @echo WARNING: "It will be removed altogether in Automake 2.0" >&2
726        shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
727        $(am__post_remove_distdir)
728
729dist-zip: distdir
730        -rm -f $(distdir).zip
731        zip -rq $(distdir).zip $(distdir)
732        $(am__post_remove_distdir)
733
734dist dist-all:
735        $(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:'
736        $(am__post_remove_distdir)
737
738# This target untars the dist file and tries a VPATH configuration.  Then
739# it guarantees that the distribution is self-contained by making another
740# tarfile.
741distcheck: dist
742        case '$(DIST_ARCHIVES)' in \
743        *.tar.gz*) \
744          GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\
745        *.tar.bz2*) \
746          bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
747        *.tar.lz*) \
748          lzip -dc $(distdir).tar.lz | $(am__untar) ;;\
749        *.tar.xz*) \
750          xz -dc $(distdir).tar.xz | $(am__untar) ;;\
751        *.tar.Z*) \
752          uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
753        *.shar.gz*) \
754          GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\
755        *.zip*) \
756          unzip $(distdir).zip ;;\
757        esac
758        chmod -R a-w $(distdir)
759        chmod u+w $(distdir)
760        mkdir $(distdir)/_build $(distdir)/_build/sub $(distdir)/_inst
761        chmod a-w $(distdir)
762        test -d $(distdir)/_build || exit 0; \
763        dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
764          && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
765          && am__cwd=`pwd` \
766          && $(am__cd) $(distdir)/_build/sub \
767          && ../../configure \
768            $(AM_DISTCHECK_CONFIGURE_FLAGS) \
769            $(DISTCHECK_CONFIGURE_FLAGS) \
770            --srcdir=../.. --prefix="$$dc_install_base" \
771          && $(MAKE) $(AM_MAKEFLAGS) \
772          && $(MAKE) $(AM_MAKEFLAGS) dvi \
773          && $(MAKE) $(AM_MAKEFLAGS) check \
774          && $(MAKE) $(AM_MAKEFLAGS) install \
775          && $(MAKE) $(AM_MAKEFLAGS) installcheck \
776          && $(MAKE) $(AM_MAKEFLAGS) uninstall \
777          && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
778                distuninstallcheck \
779          && chmod -R a-w "$$dc_install_base" \
780          && ({ \
781               (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
782               && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
783               && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
784               && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
785                    distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
786              } || { rm -rf "$$dc_destdir"; exit 1; }) \
787          && rm -rf "$$dc_destdir" \
788          && $(MAKE) $(AM_MAKEFLAGS) dist \
789          && rm -rf $(DIST_ARCHIVES) \
790          && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
791          && cd "$$am__cwd" \
792          || exit 1
793        $(am__post_remove_distdir)
794        @(echo "$(distdir) archives ready for distribution: "; \
795          list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
796          sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
797distuninstallcheck:
798        @test -n '$(distuninstallcheck_dir)' || { \
799          echo 'ERROR: trying to run $@ with an empty' \
800               '$$(distuninstallcheck_dir)' >&2; \
801          exit 1; \
802        }; \
803        $(am__cd) '$(distuninstallcheck_dir)' || { \
804          echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \
805          exit 1; \
806        }; \
807        test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \
808           || { echo "ERROR: files left after uninstall:" ; \
809                if test -n "$(DESTDIR)"; then \
810                  echo "  (check DESTDIR support)"; \
811                fi ; \
812                $(distuninstallcheck_listfiles) ; \
813                exit 1; } >&2
814distcleancheck: distclean
815        @if test '$(srcdir)' = . ; then \
816          echo "ERROR: distcleancheck can only run from a VPATH build" ; \
817          exit 1 ; \
818        fi
819        @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
820          || { echo "ERROR: files left in build directory after distclean:" ; \
821               $(distcleancheck_listfiles) ; \
822               exit 1; } >&2
823check-am: all-am
824check: check-recursive
825all-am: Makefile $(DATA)
826installdirs: installdirs-recursive
827installdirs-am:
828        for dir in "$(DESTDIR)$(pkgconfigdir)"; do \
829          test -z "$$dir" || $(MKDIR_P) "$$dir"; \
830        done
831install: install-recursive
832install-exec: install-exec-recursive
833install-data: install-data-recursive
834uninstall: uninstall-recursive
835
836install-am: all-am
837        @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
838
839installcheck: installcheck-recursive
840install-strip:
841        if test -z '$(STRIP)'; then \
842          $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
843            install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
844              install; \
845        else \
846          $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
847            install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
848            "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
849        fi
850mostlyclean-generic:
851
852clean-generic:
853
854distclean-generic:
855        -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
856        -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
857
858maintainer-clean-generic:
859        @echo "This command is intended for maintainers to use"
860        @echo "it deletes files that may require special tools to rebuild."
861clean: clean-recursive
862
863clean-am: clean-generic clean-libtool mostlyclean-am
864
865distclean: distclean-recursive
866        -rm -f $(am__CONFIG_DISTCLEAN_FILES)
867        -rm -f Makefile
868distclean-am: clean-am distclean-generic distclean-libtool \
869        distclean-local distclean-tags
870
871dvi: dvi-recursive
872
873dvi-am:
874
875html: html-recursive
876
877html-am:
878
879info: info-recursive
880
881info-am:
882
883install-data-am: install-pkgconfigDATA
884
885install-dvi: install-dvi-recursive
886
887install-dvi-am:
888
889install-exec-am:
890
891install-html: install-html-recursive
892
893install-html-am:
894
895install-info: install-info-recursive
896
897install-info-am:
898
899install-man:
900
901install-pdf: install-pdf-recursive
902
903install-pdf-am:
904
905install-ps: install-ps-recursive
906
907install-ps-am:
908
909installcheck-am:
910
911maintainer-clean: maintainer-clean-recursive
912        -rm -f $(am__CONFIG_DISTCLEAN_FILES)
913        -rm -rf $(top_srcdir)/autom4te.cache
914        -rm -f Makefile
915maintainer-clean-am: distclean-am maintainer-clean-generic
916
917mostlyclean: mostlyclean-recursive
918
919mostlyclean-am: mostlyclean-generic mostlyclean-libtool
920
921pdf: pdf-recursive
922
923pdf-am:
924
925ps: ps-recursive
926
927ps-am:
928
929uninstall-am: uninstall-pkgconfigDATA
930
931.MAKE: $(am__recursive_targets) install-am install-strip
932
933.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am \
934        am--refresh check check-am clean clean-cscope clean-generic \
935        clean-libtool cscope cscopelist-am ctags ctags-am dist \
936        dist-all dist-bzip2 dist-gzip dist-lzip dist-shar dist-tarZ \
937        dist-xz dist-zip distcheck distclean distclean-generic \
938        distclean-libtool distclean-local distclean-tags \
939        distcleancheck distdir distuninstallcheck dvi dvi-am html \
940        html-am info info-am install install-am install-data \
941        install-data-am install-dvi install-dvi-am install-exec \
942        install-exec-am install-html install-html-am install-info \
943        install-info-am install-man install-pdf install-pdf-am \
944        install-pkgconfigDATA install-ps install-ps-am install-strip \
945        installcheck installcheck-am installdirs installdirs-am \
946        maintainer-clean maintainer-clean-generic mostlyclean \
947        mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \
948        tags tags-am uninstall uninstall-am uninstall-pkgconfigDATA
949
950.PRECIOUS: Makefile
951
952
953@adolclib@.pc: adolclib.pc
954        mv $< $@
955
956test: all
957        cd ADOL-C; $(MAKE) test
958
959distclean-local:
960        rm -f @adolclib@.pc
961
962.PHONY: test
963
964# Tell versions [3.59,3.63) of GNU make to not export all variables.
965# Otherwise a system limit (for SysV at least) may be exceeded.
966.NOEXPORT:
Note: See TracBrowser for help on using the repository browser.