source: trunk/ADOL-C/include/Makefile.in @ 566

Last change on this file since 566 was 517, checked in by kulshres, 5 years ago

regenerate files

Signed-off-by: Kshitij Kulshreshtha <kshitij@…>

File size: 18.6 KB
Line 
1# Makefile.in generated by automake 1.13.4 from Makefile.am.
2# @configure_input@
3
4# Copyright (C) 1994-2013 Free Software Foundation, Inc.
5
6# This Makefile.in is free software; the Free Software Foundation
7# gives unlimited permission to copy and/or distribute it,
8# with or without modifications, as long as this notice is preserved.
9
10# This program is distributed in the hope that it will be useful,
11# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
12# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
13# PARTICULAR PURPOSE.
14
15@SET_MAKE@
16
17##############################################################################
18##############################################################################
19VPATH = @srcdir@
20am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
21am__make_running_with_option = \
22  case $${target_option-} in \
23      ?) ;; \
24      *) echo "am__make_running_with_option: internal error: invalid" \
25              "target option '$${target_option-}' specified" >&2; \
26         exit 1;; \
27  esac; \
28  has_opt=no; \
29  sane_makeflags=$$MAKEFLAGS; \
30  if $(am__is_gnu_make); then \
31    sane_makeflags=$$MFLAGS; \
32  else \
33    case $$MAKEFLAGS in \
34      *\\[\ \   ]*) \
35        bs=\\; \
36        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
37          | sed "s/$$bs$$bs[$$bs $$bs   ]*//g"`;; \
38    esac; \
39  fi; \
40  skip_next=no; \
41  strip_trailopt () \
42  { \
43    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
44  }; \
45  for flg in $$sane_makeflags; do \
46    test $$skip_next = yes && { skip_next=no; continue; }; \
47    case $$flg in \
48      *=*|--*) continue;; \
49        -*I) strip_trailopt 'I'; skip_next=yes;; \
50      -*I?*) strip_trailopt 'I';; \
51        -*O) strip_trailopt 'O'; skip_next=yes;; \
52      -*O?*) strip_trailopt 'O';; \
53        -*l) strip_trailopt 'l'; skip_next=yes;; \
54      -*l?*) strip_trailopt 'l';; \
55      -[dEDm]) skip_next=yes;; \
56      -[JT]) skip_next=yes;; \
57    esac; \
58    case $$flg in \
59      *$$target_option*) has_opt=yes; break;; \
60    esac; \
61  done; \
62  test $$has_opt = yes
63am__make_dryrun = (target_option=n; $(am__make_running_with_option))
64am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
65pkgdatadir = $(datadir)/@PACKAGE@
66pkgincludedir = $(includedir)/@PACKAGE@
67pkglibdir = $(libdir)/@PACKAGE@
68pkglibexecdir = $(libexecdir)/@PACKAGE@
69am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
70install_sh_DATA = $(install_sh) -c -m 644
71install_sh_PROGRAM = $(install_sh) -c
72install_sh_SCRIPT = $(install_sh) -c
73INSTALL_HEADER = $(INSTALL_DATA)
74transform = $(program_transform_name)
75NORMAL_INSTALL = :
76PRE_INSTALL = :
77POST_INSTALL = :
78NORMAL_UNINSTALL = :
79PRE_UNINSTALL = :
80POST_UNINSTALL = :
81build_triplet = @build@
82host_triplet = @host@
83subdir = ADOL-C/include
84DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am
85ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
86am__aclocal_m4_deps = $(top_srcdir)/autoconf/acx_builtin.m4 \
87        $(top_srcdir)/autoconf/ampi.m4 \
88        $(top_srcdir)/autoconf/colpack.m4 \
89        $(top_srcdir)/autoconf/libtool.m4 \
90        $(top_srcdir)/autoconf/ltoptions.m4 \
91        $(top_srcdir)/autoconf/ltsugar.m4 \
92        $(top_srcdir)/autoconf/ltversion.m4 \
93        $(top_srcdir)/autoconf/lt~obsolete.m4 \
94        $(top_srcdir)/autoconf/mpi.m4 \
95        $(top_srcdir)/autoconf/stdcxx_11.m4 $(top_srcdir)/configure.ac
96am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
97        $(ACLOCAL_M4)
98mkinstalldirs = $(install_sh) -d
99CONFIG_HEADER = $(top_builddir)/ADOL-C/src/config.h
100CONFIG_CLEAN_FILES =
101CONFIG_CLEAN_VPATH_FILES =
102AM_V_P = $(am__v_P_@AM_V@)
103am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
104am__v_P_0 = false
105am__v_P_1 = :
106AM_V_GEN = $(am__v_GEN_@AM_V@)
107am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
108am__v_GEN_0 = @echo "  GEN     " $@;
109am__v_GEN_1 =
110AM_V_at = $(am__v_at_@AM_V@)
111am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
112am__v_at_0 = @
113am__v_at_1 =
114SOURCES =
115DIST_SOURCES =
116RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
117        ctags-recursive dvi-recursive html-recursive info-recursive \
118        install-data-recursive install-dvi-recursive \
119        install-exec-recursive install-html-recursive \
120        install-info-recursive install-pdf-recursive \
121        install-ps-recursive install-recursive installcheck-recursive \
122        installdirs-recursive pdf-recursive ps-recursive \
123        tags-recursive uninstall-recursive
124am__can_run_installinfo = \
125  case $$AM_UPDATE_INFO_DIR in \
126    n|no|NO) false;; \
127    *) (install-info --version) >/dev/null 2>&1;; \
128  esac
129RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
130  distclean-recursive maintainer-clean-recursive
131am__recursive_targets = \
132  $(RECURSIVE_TARGETS) \
133  $(RECURSIVE_CLEAN_TARGETS) \
134  $(am__extra_recursive_targets)
135AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
136        distdir
137am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
138# Read a list of newline-separated strings from the standard input,
139# and print each of them once, without duplicates.  Input order is
140# *not* preserved.
141am__uniquify_input = $(AWK) '\
142  BEGIN { nonempty = 0; } \
143  { items[$$0] = 1; nonempty = 1; } \
144  END { if (nonempty) { for (i in items) print i; }; } \
145'
146# Make sure the list of sources is unique.  This is necessary because,
147# e.g., the same source file might be shared among _SOURCES variables
148# for different programs/libraries.
149am__define_uniq_tagged_files = \
150  list='$(am__tagged_files)'; \
151  unique=`for i in $$list; do \
152    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
153  done | $(am__uniquify_input)`
154ETAGS = etags
155CTAGS = ctags
156DIST_SUBDIRS = $(SUBDIRS)
157DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
158am__relativize = \
159  dir0=`pwd`; \
160  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
161  sed_rest='s,^[^/]*/*,,'; \
162  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
163  sed_butlast='s,/*[^/]*$$,,'; \
164  while test -n "$$dir1"; do \
165    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
166    if test "$$first" != "."; then \
167      if test "$$first" = ".."; then \
168        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
169        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
170      else \
171        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
172        if test "$$first2" = "$$first"; then \
173          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
174        else \
175          dir2="../$$dir2"; \
176        fi; \
177        dir0="$$dir0"/"$$first"; \
178      fi; \
179    fi; \
180    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
181  done; \
182  reldir="$$dir2"
183ACLOCAL = @ACLOCAL@
184ADOLC_PATCHLEVEL = @ADOLC_PATCHLEVEL@
185ADOLC_SUBVERSION = @ADOLC_SUBVERSION@
186ADOLC_VERSION = @ADOLC_VERSION@
187ADVBRANCH = @ADVBRANCH@
188AMTAR = @AMTAR@
189AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
190AR = @AR@
191AS = @AS@
192ATRIG_ERF = @ATRIG_ERF@
193AUTOCONF = @AUTOCONF@
194AUTOHEADER = @AUTOHEADER@
195AUTOMAKE = @AUTOMAKE@
196AWK = @AWK@
197CC = @CC@
198CCDEPMODE = @CCDEPMODE@
199CFLAGS = @CFLAGS@
200CPP = @CPP@
201CPPFLAGS = @CPPFLAGS@
202CXX = @CXX@
203CXXCPP = @CXXCPP@
204CXXDEPMODE = @CXXDEPMODE@
205CXXFLAGS = @CXXFLAGS@
206CYGPATH_W = @CYGPATH_W@
207DEFS = @DEFS@
208DEPDIR = @DEPDIR@
209DLLTOOL = @DLLTOOL@
210DSYMUTIL = @DSYMUTIL@
211DUMPBIN = @DUMPBIN@
212ECHO_C = @ECHO_C@
213ECHO_N = @ECHO_N@
214ECHO_T = @ECHO_T@
215EGREP = @EGREP@
216EXEEXT = @EXEEXT@
217FGREP = @FGREP@
218GREP = @GREP@
219HAVE_CXX11 = @HAVE_CXX11@
220INSTALL = @INSTALL@
221INSTALL_DATA = @INSTALL_DATA@
222INSTALL_PROGRAM = @INSTALL_PROGRAM@
223INSTALL_SCRIPT = @INSTALL_SCRIPT@
224INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
225LD = @LD@
226LDFLAGS = @LDFLAGS@
227LIBOBJS = @LIBOBJS@
228LIBS = @LIBS@
229LIBTOOL = @LIBTOOL@
230LIPO = @LIPO@
231LN_S = @LN_S@
232LTLIBOBJS = @LTLIBOBJS@
233MAINT = @MAINT@
234MAKEINFO = @MAKEINFO@
235MANIFEST_TOOL = @MANIFEST_TOOL@
236MKDIR_P = @MKDIR_P@
237NM = @NM@
238NMEDIT = @NMEDIT@
239OBJDUMP = @OBJDUMP@
240OBJEXT = @OBJEXT@
241OTOOL = @OTOOL@
242OTOOL64 = @OTOOL64@
243PACKAGE = @PACKAGE@
244PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
245PACKAGE_NAME = @PACKAGE_NAME@
246PACKAGE_STRING = @PACKAGE_STRING@
247PACKAGE_TARNAME = @PACKAGE_TARNAME@
248PACKAGE_URL = @PACKAGE_URL@
249PACKAGE_VERSION = @PACKAGE_VERSION@
250PATH_SEPARATOR = @PATH_SEPARATOR@
251RANLIB = @RANLIB@
252REAL_TYPE = @REAL_TYPE@
253SED = @SED@
254SET_MAKE = @SET_MAKE@
255SHELL = @SHELL@
256STRIP = @STRIP@
257UINT_TYPE = @UINT_TYPE@
258VERSION = @VERSION@
259_lib = @_lib@
260abs_builddir = @abs_builddir@
261abs_srcdir = @abs_srcdir@
262abs_top_builddir = @abs_top_builddir@
263abs_top_srcdir = @abs_top_srcdir@
264ac_adolc_cflags = @ac_adolc_cflags@
265ac_adolc_cxxflags = @ac_adolc_cxxflags@
266ac_aux_dir = @ac_aux_dir@
267ac_ct_AR = @ac_ct_AR@
268ac_ct_CC = @ac_ct_CC@
269ac_ct_CXX = @ac_ct_CXX@
270ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
271adolclib = @adolclib@
272am__include = @am__include@
273am__leading_dot = @am__leading_dot@
274am__quote = @am__quote@
275am__tar = @am__tar@
276am__untar = @am__untar@
277bindir = @bindir@
278build = @build@
279build_alias = @build_alias@
280build_cpu = @build_cpu@
281build_os = @build_os@
282build_vendor = @build_vendor@
283builddir = @builddir@
284datadir = @datadir@
285datarootdir = @datarootdir@
286docdir = @docdir@
287dvidir = @dvidir@
288exec_prefix = @exec_prefix@
289host = @host@
290host_alias = @host_alias@
291host_cpu = @host_cpu@
292host_os = @host_os@
293host_vendor = @host_vendor@
294htmldir = @htmldir@
295includedir = @includedir@
296infodir = @infodir@
297install_sh = @install_sh@
298libdir = @libdir@
299libexecdir = @libexecdir@
300localedir = @localedir@
301localstatedir = @localstatedir@
302mandir = @mandir@
303mkdir_p = @mkdir_p@
304oldincludedir = @oldincludedir@
305pdfdir = @pdfdir@
306prefix = @prefix@
307program_transform_name = @program_transform_name@
308psdir = @psdir@
309saveCC = @saveCC@
310saveCXX = @saveCXX@
311sbindir = @sbindir@
312sharedstatedir = @sharedstatedir@
313srcdir = @srcdir@
314sysconfdir = @sysconfdir@
315target_alias = @target_alias@
316top_build_prefix = @top_build_prefix@
317top_builddir = @top_builddir@
318top_srcdir = @top_srcdir@
319SUBDIRS = adolc
320all: all-recursive
321
322.SUFFIXES:
323$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
324        @for dep in $?; do \
325          case '$(am__configure_deps)' in \
326            *$$dep*) \
327              ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
328                && { if test -f $@; then exit 0; else break; fi; }; \
329              exit 1;; \
330          esac; \
331        done; \
332        echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign ADOL-C/include/Makefile'; \
333        $(am__cd) $(top_srcdir) && \
334          $(AUTOMAKE) --foreign ADOL-C/include/Makefile
335.PRECIOUS: Makefile
336Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
337        @case '$?' in \
338          *config.status*) \
339            cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
340          *) \
341            echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
342            cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
343        esac;
344
345$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
346        cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
347
348$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
349        cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
350$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
351        cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
352$(am__aclocal_m4_deps):
353
354mostlyclean-libtool:
355        -rm -f *.lo
356
357clean-libtool:
358        -rm -rf .libs _libs
359
360# This directory's subdirectories are mostly independent; you can cd
361# into them and run 'make' without going through this Makefile.
362# To change the values of 'make' variables: instead of editing Makefiles,
363# (1) if the variable is set in 'config.status', edit 'config.status'
364#     (which will cause the Makefiles to be regenerated when you run 'make');
365# (2) otherwise, pass the desired values on the 'make' command line.
366$(am__recursive_targets):
367        @fail=; \
368        if $(am__make_keepgoing); then \
369          failcom='fail=yes'; \
370        else \
371          failcom='exit 1'; \
372        fi; \
373        dot_seen=no; \
374        target=`echo $@ | sed s/-recursive//`; \
375        case "$@" in \
376          distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
377          *) list='$(SUBDIRS)' ;; \
378        esac; \
379        for subdir in $$list; do \
380          echo "Making $$target in $$subdir"; \
381          if test "$$subdir" = "."; then \
382            dot_seen=yes; \
383            local_target="$$target-am"; \
384          else \
385            local_target="$$target"; \
386          fi; \
387          ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
388          || eval $$failcom; \
389        done; \
390        if test "$$dot_seen" = "no"; then \
391          $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
392        fi; test -z "$$fail"
393
394ID: $(am__tagged_files)
395        $(am__define_uniq_tagged_files); mkid -fID $$unique
396tags: tags-recursive
397TAGS: tags
398
399tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
400        set x; \
401        here=`pwd`; \
402        if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
403          include_option=--etags-include; \
404          empty_fix=.; \
405        else \
406          include_option=--include; \
407          empty_fix=; \
408        fi; \
409        list='$(SUBDIRS)'; for subdir in $$list; do \
410          if test "$$subdir" = .; then :; else \
411            test ! -f $$subdir/TAGS || \
412              set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
413          fi; \
414        done; \
415        $(am__define_uniq_tagged_files); \
416        shift; \
417        if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
418          test -n "$$unique" || unique=$$empty_fix; \
419          if test $$# -gt 0; then \
420            $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
421              "$$@" $$unique; \
422          else \
423            $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
424              $$unique; \
425          fi; \
426        fi
427ctags: ctags-recursive
428
429CTAGS: ctags
430ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
431        $(am__define_uniq_tagged_files); \
432        test -z "$(CTAGS_ARGS)$$unique" \
433          || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
434             $$unique
435
436GTAGS:
437        here=`$(am__cd) $(top_builddir) && pwd` \
438          && $(am__cd) $(top_srcdir) \
439          && gtags -i $(GTAGS_ARGS) "$$here"
440cscopelist: cscopelist-recursive
441
442cscopelist-am: $(am__tagged_files)
443        list='$(am__tagged_files)'; \
444        case "$(srcdir)" in \
445          [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
446          *) sdir=$(subdir)/$(srcdir) ;; \
447        esac; \
448        for i in $$list; do \
449          if test -f "$$i"; then \
450            echo "$(subdir)/$$i"; \
451          else \
452            echo "$$sdir/$$i"; \
453          fi; \
454        done >> $(top_builddir)/cscope.files
455
456distclean-tags:
457        -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
458
459distdir: $(DISTFILES)
460        @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
461        topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
462        list='$(DISTFILES)'; \
463          dist_files=`for file in $$list; do echo $$file; done | \
464          sed -e "s|^$$srcdirstrip/||;t" \
465              -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
466        case $$dist_files in \
467          */*) $(MKDIR_P) `echo "$$dist_files" | \
468                           sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
469                           sort -u` ;; \
470        esac; \
471        for file in $$dist_files; do \
472          if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
473          if test -d $$d/$$file; then \
474            dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
475            if test -d "$(distdir)/$$file"; then \
476              find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
477            fi; \
478            if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
479              cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
480              find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
481            fi; \
482            cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
483          else \
484            test -f "$(distdir)/$$file" \
485            || cp -p $$d/$$file "$(distdir)/$$file" \
486            || exit 1; \
487          fi; \
488        done
489        @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
490          if test "$$subdir" = .; then :; else \
491            $(am__make_dryrun) \
492              || test -d "$(distdir)/$$subdir" \
493              || $(MKDIR_P) "$(distdir)/$$subdir" \
494              || exit 1; \
495            dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
496            $(am__relativize); \
497            new_distdir=$$reldir; \
498            dir1=$$subdir; dir2="$(top_distdir)"; \
499            $(am__relativize); \
500            new_top_distdir=$$reldir; \
501            echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
502            echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
503            ($(am__cd) $$subdir && \
504              $(MAKE) $(AM_MAKEFLAGS) \
505                top_distdir="$$new_top_distdir" \
506                distdir="$$new_distdir" \
507                am__remove_distdir=: \
508                am__skip_length_check=: \
509                am__skip_mode_fix=: \
510                distdir) \
511              || exit 1; \
512          fi; \
513        done
514check-am: all-am
515check: check-recursive
516all-am: Makefile
517installdirs: installdirs-recursive
518installdirs-am:
519install: install-recursive
520install-exec: install-exec-recursive
521install-data: install-data-recursive
522uninstall: uninstall-recursive
523
524install-am: all-am
525        @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
526
527installcheck: installcheck-recursive
528install-strip:
529        if test -z '$(STRIP)'; then \
530          $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
531            install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
532              install; \
533        else \
534          $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
535            install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
536            "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
537        fi
538mostlyclean-generic:
539
540clean-generic:
541
542distclean-generic:
543        -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
544        -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
545
546maintainer-clean-generic:
547        @echo "This command is intended for maintainers to use"
548        @echo "it deletes files that may require special tools to rebuild."
549clean: clean-recursive
550
551clean-am: clean-generic clean-libtool mostlyclean-am
552
553distclean: distclean-recursive
554        -rm -f Makefile
555distclean-am: clean-am distclean-generic distclean-tags
556
557dvi: dvi-recursive
558
559dvi-am:
560
561html: html-recursive
562
563html-am:
564
565info: info-recursive
566
567info-am:
568
569install-data-am:
570
571install-dvi: install-dvi-recursive
572
573install-dvi-am:
574
575install-exec-am:
576
577install-html: install-html-recursive
578
579install-html-am:
580
581install-info: install-info-recursive
582
583install-info-am:
584
585install-man:
586
587install-pdf: install-pdf-recursive
588
589install-pdf-am:
590
591install-ps: install-ps-recursive
592
593install-ps-am:
594
595installcheck-am:
596
597maintainer-clean: maintainer-clean-recursive
598        -rm -f Makefile
599maintainer-clean-am: distclean-am maintainer-clean-generic
600
601mostlyclean: mostlyclean-recursive
602
603mostlyclean-am: mostlyclean-generic mostlyclean-libtool
604
605pdf: pdf-recursive
606
607pdf-am:
608
609ps: ps-recursive
610
611ps-am:
612
613uninstall-am:
614
615.MAKE: $(am__recursive_targets) install-am install-strip
616
617.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am check \
618        check-am clean clean-generic clean-libtool cscopelist-am ctags \
619        ctags-am distclean distclean-generic distclean-libtool \
620        distclean-tags distdir dvi dvi-am html html-am info info-am \
621        install install-am install-data install-data-am install-dvi \
622        install-dvi-am install-exec install-exec-am install-html \
623        install-html-am install-info install-info-am install-man \
624        install-pdf install-pdf-am install-ps install-ps-am \
625        install-strip installcheck installcheck-am installdirs \
626        installdirs-am maintainer-clean maintainer-clean-generic \
627        mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \
628        ps ps-am tags tags-am uninstall uninstall-am
629
630
631# Tell versions [3.59,3.63) of GNU make to not export all variables.
632# Otherwise a system limit (for SysV at least) may be exceeded.
633.NOEXPORT:
Note: See TracBrowser for help on using the repository browser.