source: trunk/ADOL-C/include/Makefile.in @ 514

Last change on this file since 514 was 514, checked in by kulshres, 6 years ago

regenerate files

Signed-off-by: Kshitij Kulshreshtha <kshitij@…>

File size: 18.6 KB
Line 
1# Makefile.in generated by automake 1.13.4 from Makefile.am.
2# @configure_input@
3
4# Copyright (C) 1994-2013 Free Software Foundation, Inc.
5
6# This Makefile.in is free software; the Free Software Foundation
7# gives unlimited permission to copy and/or distribute it,
8# with or without modifications, as long as this notice is preserved.
9
10# This program is distributed in the hope that it will be useful,
11# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
12# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
13# PARTICULAR PURPOSE.
14
15@SET_MAKE@
16
17##############################################################################
18##############################################################################
19VPATH = @srcdir@
20am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
21am__make_running_with_option = \
22  case $${target_option-} in \
23      ?) ;; \
24      *) echo "am__make_running_with_option: internal error: invalid" \
25              "target option '$${target_option-}' specified" >&2; \
26         exit 1;; \
27  esac; \
28  has_opt=no; \
29  sane_makeflags=$$MAKEFLAGS; \
30  if $(am__is_gnu_make); then \
31    sane_makeflags=$$MFLAGS; \
32  else \
33    case $$MAKEFLAGS in \
34      *\\[\ \   ]*) \
35        bs=\\; \
36        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
37          | sed "s/$$bs$$bs[$$bs $$bs   ]*//g"`;; \
38    esac; \
39  fi; \
40  skip_next=no; \
41  strip_trailopt () \
42  { \
43    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
44  }; \
45  for flg in $$sane_makeflags; do \
46    test $$skip_next = yes && { skip_next=no; continue; }; \
47    case $$flg in \
48      *=*|--*) continue;; \
49        -*I) strip_trailopt 'I'; skip_next=yes;; \
50      -*I?*) strip_trailopt 'I';; \
51        -*O) strip_trailopt 'O'; skip_next=yes;; \
52      -*O?*) strip_trailopt 'O';; \
53        -*l) strip_trailopt 'l'; skip_next=yes;; \
54      -*l?*) strip_trailopt 'l';; \
55      -[dEDm]) skip_next=yes;; \
56      -[JT]) skip_next=yes;; \
57    esac; \
58    case $$flg in \
59      *$$target_option*) has_opt=yes; break;; \
60    esac; \
61  done; \
62  test $$has_opt = yes
63am__make_dryrun = (target_option=n; $(am__make_running_with_option))
64am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
65pkgdatadir = $(datadir)/@PACKAGE@
66pkgincludedir = $(includedir)/@PACKAGE@
67pkglibdir = $(libdir)/@PACKAGE@
68pkglibexecdir = $(libexecdir)/@PACKAGE@
69am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
70install_sh_DATA = $(install_sh) -c -m 644
71install_sh_PROGRAM = $(install_sh) -c
72install_sh_SCRIPT = $(install_sh) -c
73INSTALL_HEADER = $(INSTALL_DATA)
74transform = $(program_transform_name)
75NORMAL_INSTALL = :
76PRE_INSTALL = :
77POST_INSTALL = :
78NORMAL_UNINSTALL = :
79PRE_UNINSTALL = :
80POST_UNINSTALL = :
81build_triplet = @build@
82host_triplet = @host@
83subdir = ADOL-C/include
84DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am
85ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
86am__aclocal_m4_deps = $(top_srcdir)/autoconf/acx_builtin.m4 \
87        $(top_srcdir)/autoconf/ampi.m4 \
88        $(top_srcdir)/autoconf/colpack.m4 \
89        $(top_srcdir)/autoconf/libtool.m4 \
90        $(top_srcdir)/autoconf/ltoptions.m4 \
91        $(top_srcdir)/autoconf/ltsugar.m4 \
92        $(top_srcdir)/autoconf/ltversion.m4 \
93        $(top_srcdir)/autoconf/lt~obsolete.m4 \
94        $(top_srcdir)/autoconf/mpi.m4 $(top_srcdir)/configure.ac
95am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
96        $(ACLOCAL_M4)
97mkinstalldirs = $(install_sh) -d
98CONFIG_HEADER = $(top_builddir)/ADOL-C/src/config.h
99CONFIG_CLEAN_FILES =
100CONFIG_CLEAN_VPATH_FILES =
101AM_V_P = $(am__v_P_@AM_V@)
102am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
103am__v_P_0 = false
104am__v_P_1 = :
105AM_V_GEN = $(am__v_GEN_@AM_V@)
106am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
107am__v_GEN_0 = @echo "  GEN     " $@;
108am__v_GEN_1 =
109AM_V_at = $(am__v_at_@AM_V@)
110am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
111am__v_at_0 = @
112am__v_at_1 =
113SOURCES =
114DIST_SOURCES =
115RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
116        ctags-recursive dvi-recursive html-recursive info-recursive \
117        install-data-recursive install-dvi-recursive \
118        install-exec-recursive install-html-recursive \
119        install-info-recursive install-pdf-recursive \
120        install-ps-recursive install-recursive installcheck-recursive \
121        installdirs-recursive pdf-recursive ps-recursive \
122        tags-recursive uninstall-recursive
123am__can_run_installinfo = \
124  case $$AM_UPDATE_INFO_DIR in \
125    n|no|NO) false;; \
126    *) (install-info --version) >/dev/null 2>&1;; \
127  esac
128RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
129  distclean-recursive maintainer-clean-recursive
130am__recursive_targets = \
131  $(RECURSIVE_TARGETS) \
132  $(RECURSIVE_CLEAN_TARGETS) \
133  $(am__extra_recursive_targets)
134AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
135        distdir
136am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
137# Read a list of newline-separated strings from the standard input,
138# and print each of them once, without duplicates.  Input order is
139# *not* preserved.
140am__uniquify_input = $(AWK) '\
141  BEGIN { nonempty = 0; } \
142  { items[$$0] = 1; nonempty = 1; } \
143  END { if (nonempty) { for (i in items) print i; }; } \
144'
145# Make sure the list of sources is unique.  This is necessary because,
146# e.g., the same source file might be shared among _SOURCES variables
147# for different programs/libraries.
148am__define_uniq_tagged_files = \
149  list='$(am__tagged_files)'; \
150  unique=`for i in $$list; do \
151    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
152  done | $(am__uniquify_input)`
153ETAGS = etags
154CTAGS = ctags
155DIST_SUBDIRS = $(SUBDIRS)
156DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
157am__relativize = \
158  dir0=`pwd`; \
159  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
160  sed_rest='s,^[^/]*/*,,'; \
161  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
162  sed_butlast='s,/*[^/]*$$,,'; \
163  while test -n "$$dir1"; do \
164    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
165    if test "$$first" != "."; then \
166      if test "$$first" = ".."; then \
167        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
168        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
169      else \
170        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
171        if test "$$first2" = "$$first"; then \
172          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
173        else \
174          dir2="../$$dir2"; \
175        fi; \
176        dir0="$$dir0"/"$$first"; \
177      fi; \
178    fi; \
179    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
180  done; \
181  reldir="$$dir2"
182ACLOCAL = @ACLOCAL@
183ADOLC_PATCHLEVEL = @ADOLC_PATCHLEVEL@
184ADOLC_SUBVERSION = @ADOLC_SUBVERSION@
185ADOLC_VERSION = @ADOLC_VERSION@
186ADVBRANCH = @ADVBRANCH@
187AMTAR = @AMTAR@
188AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
189AR = @AR@
190AS = @AS@
191ATRIG_ERF = @ATRIG_ERF@
192AUTOCONF = @AUTOCONF@
193AUTOHEADER = @AUTOHEADER@
194AUTOMAKE = @AUTOMAKE@
195AWK = @AWK@
196CC = @CC@
197CCDEPMODE = @CCDEPMODE@
198CFLAGS = @CFLAGS@
199CPP = @CPP@
200CPPFLAGS = @CPPFLAGS@
201CXX = @CXX@
202CXXCPP = @CXXCPP@
203CXXDEPMODE = @CXXDEPMODE@
204CXXFLAGS = @CXXFLAGS@
205CYGPATH_W = @CYGPATH_W@
206DEFS = @DEFS@
207DEPDIR = @DEPDIR@
208DLLTOOL = @DLLTOOL@
209DSYMUTIL = @DSYMUTIL@
210DUMPBIN = @DUMPBIN@
211ECHO_C = @ECHO_C@
212ECHO_N = @ECHO_N@
213ECHO_T = @ECHO_T@
214EGREP = @EGREP@
215EXEEXT = @EXEEXT@
216FGREP = @FGREP@
217GREP = @GREP@
218HAVE_CXX11 = @HAVE_CXX11@
219INSTALL = @INSTALL@
220INSTALL_DATA = @INSTALL_DATA@
221INSTALL_PROGRAM = @INSTALL_PROGRAM@
222INSTALL_SCRIPT = @INSTALL_SCRIPT@
223INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
224LD = @LD@
225LDFLAGS = @LDFLAGS@
226LIBOBJS = @LIBOBJS@
227LIBS = @LIBS@
228LIBTOOL = @LIBTOOL@
229LIPO = @LIPO@
230LN_S = @LN_S@
231LTLIBOBJS = @LTLIBOBJS@
232MAINT = @MAINT@
233MAKEINFO = @MAKEINFO@
234MANIFEST_TOOL = @MANIFEST_TOOL@
235MKDIR_P = @MKDIR_P@
236NM = @NM@
237NMEDIT = @NMEDIT@
238OBJDUMP = @OBJDUMP@
239OBJEXT = @OBJEXT@
240OTOOL = @OTOOL@
241OTOOL64 = @OTOOL64@
242PACKAGE = @PACKAGE@
243PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
244PACKAGE_NAME = @PACKAGE_NAME@
245PACKAGE_STRING = @PACKAGE_STRING@
246PACKAGE_TARNAME = @PACKAGE_TARNAME@
247PACKAGE_URL = @PACKAGE_URL@
248PACKAGE_VERSION = @PACKAGE_VERSION@
249PATH_SEPARATOR = @PATH_SEPARATOR@
250RANLIB = @RANLIB@
251REAL_TYPE = @REAL_TYPE@
252SED = @SED@
253SET_MAKE = @SET_MAKE@
254SHELL = @SHELL@
255STRIP = @STRIP@
256UINT_TYPE = @UINT_TYPE@
257VERSION = @VERSION@
258_lib = @_lib@
259abs_builddir = @abs_builddir@
260abs_srcdir = @abs_srcdir@
261abs_top_builddir = @abs_top_builddir@
262abs_top_srcdir = @abs_top_srcdir@
263ac_adolc_cflags = @ac_adolc_cflags@
264ac_adolc_cxxflags = @ac_adolc_cxxflags@
265ac_aux_dir = @ac_aux_dir@
266ac_ct_AR = @ac_ct_AR@
267ac_ct_CC = @ac_ct_CC@
268ac_ct_CXX = @ac_ct_CXX@
269ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
270adolclib = @adolclib@
271am__include = @am__include@
272am__leading_dot = @am__leading_dot@
273am__quote = @am__quote@
274am__tar = @am__tar@
275am__untar = @am__untar@
276bindir = @bindir@
277build = @build@
278build_alias = @build_alias@
279build_cpu = @build_cpu@
280build_os = @build_os@
281build_vendor = @build_vendor@
282builddir = @builddir@
283datadir = @datadir@
284datarootdir = @datarootdir@
285docdir = @docdir@
286dvidir = @dvidir@
287exec_prefix = @exec_prefix@
288host = @host@
289host_alias = @host_alias@
290host_cpu = @host_cpu@
291host_os = @host_os@
292host_vendor = @host_vendor@
293htmldir = @htmldir@
294includedir = @includedir@
295infodir = @infodir@
296install_sh = @install_sh@
297libdir = @libdir@
298libexecdir = @libexecdir@
299localedir = @localedir@
300localstatedir = @localstatedir@
301mandir = @mandir@
302mkdir_p = @mkdir_p@
303oldincludedir = @oldincludedir@
304pdfdir = @pdfdir@
305prefix = @prefix@
306program_transform_name = @program_transform_name@
307psdir = @psdir@
308saveCC = @saveCC@
309saveCXX = @saveCXX@
310sbindir = @sbindir@
311sharedstatedir = @sharedstatedir@
312srcdir = @srcdir@
313sysconfdir = @sysconfdir@
314target_alias = @target_alias@
315top_build_prefix = @top_build_prefix@
316top_builddir = @top_builddir@
317top_srcdir = @top_srcdir@
318SUBDIRS = adolc
319all: all-recursive
320
321.SUFFIXES:
322$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
323        @for dep in $?; do \
324          case '$(am__configure_deps)' in \
325            *$$dep*) \
326              ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
327                && { if test -f $@; then exit 0; else break; fi; }; \
328              exit 1;; \
329          esac; \
330        done; \
331        echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign ADOL-C/include/Makefile'; \
332        $(am__cd) $(top_srcdir) && \
333          $(AUTOMAKE) --foreign ADOL-C/include/Makefile
334.PRECIOUS: Makefile
335Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
336        @case '$?' in \
337          *config.status*) \
338            cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
339          *) \
340            echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
341            cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
342        esac;
343
344$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
345        cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
346
347$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
348        cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
349$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
350        cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
351$(am__aclocal_m4_deps):
352
353mostlyclean-libtool:
354        -rm -f *.lo
355
356clean-libtool:
357        -rm -rf .libs _libs
358
359# This directory's subdirectories are mostly independent; you can cd
360# into them and run 'make' without going through this Makefile.
361# To change the values of 'make' variables: instead of editing Makefiles,
362# (1) if the variable is set in 'config.status', edit 'config.status'
363#     (which will cause the Makefiles to be regenerated when you run 'make');
364# (2) otherwise, pass the desired values on the 'make' command line.
365$(am__recursive_targets):
366        @fail=; \
367        if $(am__make_keepgoing); then \
368          failcom='fail=yes'; \
369        else \
370          failcom='exit 1'; \
371        fi; \
372        dot_seen=no; \
373        target=`echo $@ | sed s/-recursive//`; \
374        case "$@" in \
375          distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
376          *) list='$(SUBDIRS)' ;; \
377        esac; \
378        for subdir in $$list; do \
379          echo "Making $$target in $$subdir"; \
380          if test "$$subdir" = "."; then \
381            dot_seen=yes; \
382            local_target="$$target-am"; \
383          else \
384            local_target="$$target"; \
385          fi; \
386          ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
387          || eval $$failcom; \
388        done; \
389        if test "$$dot_seen" = "no"; then \
390          $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
391        fi; test -z "$$fail"
392
393ID: $(am__tagged_files)
394        $(am__define_uniq_tagged_files); mkid -fID $$unique
395tags: tags-recursive
396TAGS: tags
397
398tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
399        set x; \
400        here=`pwd`; \
401        if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
402          include_option=--etags-include; \
403          empty_fix=.; \
404        else \
405          include_option=--include; \
406          empty_fix=; \
407        fi; \
408        list='$(SUBDIRS)'; for subdir in $$list; do \
409          if test "$$subdir" = .; then :; else \
410            test ! -f $$subdir/TAGS || \
411              set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
412          fi; \
413        done; \
414        $(am__define_uniq_tagged_files); \
415        shift; \
416        if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
417          test -n "$$unique" || unique=$$empty_fix; \
418          if test $$# -gt 0; then \
419            $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
420              "$$@" $$unique; \
421          else \
422            $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
423              $$unique; \
424          fi; \
425        fi
426ctags: ctags-recursive
427
428CTAGS: ctags
429ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
430        $(am__define_uniq_tagged_files); \
431        test -z "$(CTAGS_ARGS)$$unique" \
432          || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
433             $$unique
434
435GTAGS:
436        here=`$(am__cd) $(top_builddir) && pwd` \
437          && $(am__cd) $(top_srcdir) \
438          && gtags -i $(GTAGS_ARGS) "$$here"
439cscopelist: cscopelist-recursive
440
441cscopelist-am: $(am__tagged_files)
442        list='$(am__tagged_files)'; \
443        case "$(srcdir)" in \
444          [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
445          *) sdir=$(subdir)/$(srcdir) ;; \
446        esac; \
447        for i in $$list; do \
448          if test -f "$$i"; then \
449            echo "$(subdir)/$$i"; \
450          else \
451            echo "$$sdir/$$i"; \
452          fi; \
453        done >> $(top_builddir)/cscope.files
454
455distclean-tags:
456        -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
457
458distdir: $(DISTFILES)
459        @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
460        topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
461        list='$(DISTFILES)'; \
462          dist_files=`for file in $$list; do echo $$file; done | \
463          sed -e "s|^$$srcdirstrip/||;t" \
464              -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
465        case $$dist_files in \
466          */*) $(MKDIR_P) `echo "$$dist_files" | \
467                           sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
468                           sort -u` ;; \
469        esac; \
470        for file in $$dist_files; do \
471          if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
472          if test -d $$d/$$file; then \
473            dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
474            if test -d "$(distdir)/$$file"; then \
475              find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
476            fi; \
477            if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
478              cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
479              find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
480            fi; \
481            cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
482          else \
483            test -f "$(distdir)/$$file" \
484            || cp -p $$d/$$file "$(distdir)/$$file" \
485            || exit 1; \
486          fi; \
487        done
488        @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
489          if test "$$subdir" = .; then :; else \
490            $(am__make_dryrun) \
491              || test -d "$(distdir)/$$subdir" \
492              || $(MKDIR_P) "$(distdir)/$$subdir" \
493              || exit 1; \
494            dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
495            $(am__relativize); \
496            new_distdir=$$reldir; \
497            dir1=$$subdir; dir2="$(top_distdir)"; \
498            $(am__relativize); \
499            new_top_distdir=$$reldir; \
500            echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
501            echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
502            ($(am__cd) $$subdir && \
503              $(MAKE) $(AM_MAKEFLAGS) \
504                top_distdir="$$new_top_distdir" \
505                distdir="$$new_distdir" \
506                am__remove_distdir=: \
507                am__skip_length_check=: \
508                am__skip_mode_fix=: \
509                distdir) \
510              || exit 1; \
511          fi; \
512        done
513check-am: all-am
514check: check-recursive
515all-am: Makefile
516installdirs: installdirs-recursive
517installdirs-am:
518install: install-recursive
519install-exec: install-exec-recursive
520install-data: install-data-recursive
521uninstall: uninstall-recursive
522
523install-am: all-am
524        @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
525
526installcheck: installcheck-recursive
527install-strip:
528        if test -z '$(STRIP)'; then \
529          $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
530            install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
531              install; \
532        else \
533          $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
534            install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
535            "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
536        fi
537mostlyclean-generic:
538
539clean-generic:
540
541distclean-generic:
542        -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
543        -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
544
545maintainer-clean-generic:
546        @echo "This command is intended for maintainers to use"
547        @echo "it deletes files that may require special tools to rebuild."
548clean: clean-recursive
549
550clean-am: clean-generic clean-libtool mostlyclean-am
551
552distclean: distclean-recursive
553        -rm -f Makefile
554distclean-am: clean-am distclean-generic distclean-tags
555
556dvi: dvi-recursive
557
558dvi-am:
559
560html: html-recursive
561
562html-am:
563
564info: info-recursive
565
566info-am:
567
568install-data-am:
569
570install-dvi: install-dvi-recursive
571
572install-dvi-am:
573
574install-exec-am:
575
576install-html: install-html-recursive
577
578install-html-am:
579
580install-info: install-info-recursive
581
582install-info-am:
583
584install-man:
585
586install-pdf: install-pdf-recursive
587
588install-pdf-am:
589
590install-ps: install-ps-recursive
591
592install-ps-am:
593
594installcheck-am:
595
596maintainer-clean: maintainer-clean-recursive
597        -rm -f Makefile
598maintainer-clean-am: distclean-am maintainer-clean-generic
599
600mostlyclean: mostlyclean-recursive
601
602mostlyclean-am: mostlyclean-generic mostlyclean-libtool
603
604pdf: pdf-recursive
605
606pdf-am:
607
608ps: ps-recursive
609
610ps-am:
611
612uninstall-am:
613
614.MAKE: $(am__recursive_targets) install-am install-strip
615
616.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am check \
617        check-am clean clean-generic clean-libtool cscopelist-am ctags \
618        ctags-am distclean distclean-generic distclean-libtool \
619        distclean-tags distdir dvi dvi-am html html-am info info-am \
620        install install-am install-data install-data-am install-dvi \
621        install-dvi-am install-exec install-exec-am install-html \
622        install-html-am install-info install-info-am install-man \
623        install-pdf install-pdf-am install-ps install-ps-am \
624        install-strip installcheck installcheck-am installdirs \
625        installdirs-am maintainer-clean maintainer-clean-generic \
626        mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \
627        ps ps-am tags tags-am uninstall uninstall-am
628
629
630# Tell versions [3.59,3.63) of GNU make to not export all variables.
631# Otherwise a system limit (for SysV at least) may be exceeded.
632.NOEXPORT:
Note: See TracBrowser for help on using the repository browser.