source: trunk/ADOL-C/include/Makefile.in @ 472

Last change on this file since 472 was 472, checked in by kulshres, 6 years ago

regenerate files

Signed-off-by: Kshitij Kulshreshtha <kshitij@…>

File size: 18.6 KB
Line 
1# Makefile.in generated by automake 1.13.4 from Makefile.am.
2# @configure_input@
3
4# Copyright (C) 1994-2013 Free Software Foundation, Inc.
5
6# This Makefile.in is free software; the Free Software Foundation
7# gives unlimited permission to copy and/or distribute it,
8# with or without modifications, as long as this notice is preserved.
9
10# This program is distributed in the hope that it will be useful,
11# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
12# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
13# PARTICULAR PURPOSE.
14
15@SET_MAKE@
16
17##############################################################################
18##############################################################################
19VPATH = @srcdir@
20am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
21am__make_running_with_option = \
22  case $${target_option-} in \
23      ?) ;; \
24      *) echo "am__make_running_with_option: internal error: invalid" \
25              "target option '$${target_option-}' specified" >&2; \
26         exit 1;; \
27  esac; \
28  has_opt=no; \
29  sane_makeflags=$$MAKEFLAGS; \
30  if $(am__is_gnu_make); then \
31    sane_makeflags=$$MFLAGS; \
32  else \
33    case $$MAKEFLAGS in \
34      *\\[\ \   ]*) \
35        bs=\\; \
36        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
37          | sed "s/$$bs$$bs[$$bs $$bs   ]*//g"`;; \
38    esac; \
39  fi; \
40  skip_next=no; \
41  strip_trailopt () \
42  { \
43    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
44  }; \
45  for flg in $$sane_makeflags; do \
46    test $$skip_next = yes && { skip_next=no; continue; }; \
47    case $$flg in \
48      *=*|--*) continue;; \
49        -*I) strip_trailopt 'I'; skip_next=yes;; \
50      -*I?*) strip_trailopt 'I';; \
51        -*O) strip_trailopt 'O'; skip_next=yes;; \
52      -*O?*) strip_trailopt 'O';; \
53        -*l) strip_trailopt 'l'; skip_next=yes;; \
54      -*l?*) strip_trailopt 'l';; \
55      -[dEDm]) skip_next=yes;; \
56      -[JT]) skip_next=yes;; \
57    esac; \
58    case $$flg in \
59      *$$target_option*) has_opt=yes; break;; \
60    esac; \
61  done; \
62  test $$has_opt = yes
63am__make_dryrun = (target_option=n; $(am__make_running_with_option))
64am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
65pkgdatadir = $(datadir)/@PACKAGE@
66pkgincludedir = $(includedir)/@PACKAGE@
67pkglibdir = $(libdir)/@PACKAGE@
68pkglibexecdir = $(libexecdir)/@PACKAGE@
69am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
70install_sh_DATA = $(install_sh) -c -m 644
71install_sh_PROGRAM = $(install_sh) -c
72install_sh_SCRIPT = $(install_sh) -c
73INSTALL_HEADER = $(INSTALL_DATA)
74transform = $(program_transform_name)
75NORMAL_INSTALL = :
76PRE_INSTALL = :
77POST_INSTALL = :
78NORMAL_UNINSTALL = :
79PRE_UNINSTALL = :
80POST_UNINSTALL = :
81build_triplet = @build@
82host_triplet = @host@
83subdir = ADOL-C/include
84DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am
85ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
86am__aclocal_m4_deps = $(top_srcdir)/autoconf/acx_builtin.m4 \
87        $(top_srcdir)/autoconf/ampi.m4 \
88        $(top_srcdir)/autoconf/colpack.m4 \
89        $(top_srcdir)/autoconf/libtool.m4 \
90        $(top_srcdir)/autoconf/ltoptions.m4 \
91        $(top_srcdir)/autoconf/ltsugar.m4 \
92        $(top_srcdir)/autoconf/ltversion.m4 \
93        $(top_srcdir)/autoconf/lt~obsolete.m4 \
94        $(top_srcdir)/autoconf/mpi.m4 $(top_srcdir)/configure.ac
95am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
96        $(ACLOCAL_M4)
97mkinstalldirs = $(install_sh) -d
98CONFIG_HEADER = $(top_builddir)/ADOL-C/src/config.h
99CONFIG_CLEAN_FILES =
100CONFIG_CLEAN_VPATH_FILES =
101AM_V_P = $(am__v_P_@AM_V@)
102am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
103am__v_P_0 = false
104am__v_P_1 = :
105AM_V_GEN = $(am__v_GEN_@AM_V@)
106am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
107am__v_GEN_0 = @echo "  GEN     " $@;
108am__v_GEN_1 =
109AM_V_at = $(am__v_at_@AM_V@)
110am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
111am__v_at_0 = @
112am__v_at_1 =
113SOURCES =
114DIST_SOURCES =
115RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
116        ctags-recursive dvi-recursive html-recursive info-recursive \
117        install-data-recursive install-dvi-recursive \
118        install-exec-recursive install-html-recursive \
119        install-info-recursive install-pdf-recursive \
120        install-ps-recursive install-recursive installcheck-recursive \
121        installdirs-recursive pdf-recursive ps-recursive \
122        tags-recursive uninstall-recursive
123am__can_run_installinfo = \
124  case $$AM_UPDATE_INFO_DIR in \
125    n|no|NO) false;; \
126    *) (install-info --version) >/dev/null 2>&1;; \
127  esac
128RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
129  distclean-recursive maintainer-clean-recursive
130am__recursive_targets = \
131  $(RECURSIVE_TARGETS) \
132  $(RECURSIVE_CLEAN_TARGETS) \
133  $(am__extra_recursive_targets)
134AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
135        distdir
136am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
137# Read a list of newline-separated strings from the standard input,
138# and print each of them once, without duplicates.  Input order is
139# *not* preserved.
140am__uniquify_input = $(AWK) '\
141  BEGIN { nonempty = 0; } \
142  { items[$$0] = 1; nonempty = 1; } \
143  END { if (nonempty) { for (i in items) print i; }; } \
144'
145# Make sure the list of sources is unique.  This is necessary because,
146# e.g., the same source file might be shared among _SOURCES variables
147# for different programs/libraries.
148am__define_uniq_tagged_files = \
149  list='$(am__tagged_files)'; \
150  unique=`for i in $$list; do \
151    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
152  done | $(am__uniquify_input)`
153ETAGS = etags
154CTAGS = ctags
155DIST_SUBDIRS = $(SUBDIRS)
156DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
157am__relativize = \
158  dir0=`pwd`; \
159  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
160  sed_rest='s,^[^/]*/*,,'; \
161  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
162  sed_butlast='s,/*[^/]*$$,,'; \
163  while test -n "$$dir1"; do \
164    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
165    if test "$$first" != "."; then \
166      if test "$$first" = ".."; then \
167        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
168        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
169      else \
170        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
171        if test "$$first2" = "$$first"; then \
172          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
173        else \
174          dir2="../$$dir2"; \
175        fi; \
176        dir0="$$dir0"/"$$first"; \
177      fi; \
178    fi; \
179    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
180  done; \
181  reldir="$$dir2"
182ACLOCAL = @ACLOCAL@
183ADOLC_PATCHLEVEL = @ADOLC_PATCHLEVEL@
184ADOLC_SUBVERSION = @ADOLC_SUBVERSION@
185ADOLC_VERSION = @ADOLC_VERSION@
186ADVBRANCH = @ADVBRANCH@
187AMTAR = @AMTAR@
188AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
189AR = @AR@
190AS = @AS@
191ATRIG_ERF = @ATRIG_ERF@
192AUTOCONF = @AUTOCONF@
193AUTOHEADER = @AUTOHEADER@
194AUTOMAKE = @AUTOMAKE@
195AWK = @AWK@
196CC = @CC@
197CCDEPMODE = @CCDEPMODE@
198CFLAGS = @CFLAGS@
199CPP = @CPP@
200CPPFLAGS = @CPPFLAGS@
201CXX = @CXX@
202CXXCPP = @CXXCPP@
203CXXDEPMODE = @CXXDEPMODE@
204CXXFLAGS = @CXXFLAGS@
205CYGPATH_W = @CYGPATH_W@
206DEFS = @DEFS@
207DEPDIR = @DEPDIR@
208DLLTOOL = @DLLTOOL@
209DSYMUTIL = @DSYMUTIL@
210DUMPBIN = @DUMPBIN@
211ECHO_C = @ECHO_C@
212ECHO_N = @ECHO_N@
213ECHO_T = @ECHO_T@
214EGREP = @EGREP@
215EXEEXT = @EXEEXT@
216FGREP = @FGREP@
217GREP = @GREP@
218INSTALL = @INSTALL@
219INSTALL_DATA = @INSTALL_DATA@
220INSTALL_PROGRAM = @INSTALL_PROGRAM@
221INSTALL_SCRIPT = @INSTALL_SCRIPT@
222INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
223LD = @LD@
224LDFLAGS = @LDFLAGS@
225LIBOBJS = @LIBOBJS@
226LIBS = @LIBS@
227LIBTOOL = @LIBTOOL@
228LIPO = @LIPO@
229LN_S = @LN_S@
230LTLIBOBJS = @LTLIBOBJS@
231MAINT = @MAINT@
232MAKEINFO = @MAKEINFO@
233MANIFEST_TOOL = @MANIFEST_TOOL@
234MKDIR_P = @MKDIR_P@
235NM = @NM@
236NMEDIT = @NMEDIT@
237OBJDUMP = @OBJDUMP@
238OBJEXT = @OBJEXT@
239OTOOL = @OTOOL@
240OTOOL64 = @OTOOL64@
241PACKAGE = @PACKAGE@
242PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
243PACKAGE_NAME = @PACKAGE_NAME@
244PACKAGE_STRING = @PACKAGE_STRING@
245PACKAGE_TARNAME = @PACKAGE_TARNAME@
246PACKAGE_URL = @PACKAGE_URL@
247PACKAGE_VERSION = @PACKAGE_VERSION@
248PATH_SEPARATOR = @PATH_SEPARATOR@
249RANLIB = @RANLIB@
250REAL_TYPE = @REAL_TYPE@
251SED = @SED@
252SET_MAKE = @SET_MAKE@
253SHELL = @SHELL@
254STRIP = @STRIP@
255UINT_TYPE = @UINT_TYPE@
256VERSION = @VERSION@
257_lib = @_lib@
258abs_builddir = @abs_builddir@
259abs_srcdir = @abs_srcdir@
260abs_top_builddir = @abs_top_builddir@
261abs_top_srcdir = @abs_top_srcdir@
262ac_adolc_cflags = @ac_adolc_cflags@
263ac_adolc_cxxflags = @ac_adolc_cxxflags@
264ac_aux_dir = @ac_aux_dir@
265ac_ct_AR = @ac_ct_AR@
266ac_ct_CC = @ac_ct_CC@
267ac_ct_CXX = @ac_ct_CXX@
268ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
269adolclib = @adolclib@
270am__include = @am__include@
271am__leading_dot = @am__leading_dot@
272am__quote = @am__quote@
273am__tar = @am__tar@
274am__untar = @am__untar@
275bindir = @bindir@
276build = @build@
277build_alias = @build_alias@
278build_cpu = @build_cpu@
279build_os = @build_os@
280build_vendor = @build_vendor@
281builddir = @builddir@
282datadir = @datadir@
283datarootdir = @datarootdir@
284docdir = @docdir@
285dvidir = @dvidir@
286exec_prefix = @exec_prefix@
287host = @host@
288host_alias = @host_alias@
289host_cpu = @host_cpu@
290host_os = @host_os@
291host_vendor = @host_vendor@
292htmldir = @htmldir@
293includedir = @includedir@
294infodir = @infodir@
295install_sh = @install_sh@
296libdir = @libdir@
297libexecdir = @libexecdir@
298localedir = @localedir@
299localstatedir = @localstatedir@
300mandir = @mandir@
301mkdir_p = @mkdir_p@
302oldincludedir = @oldincludedir@
303pdfdir = @pdfdir@
304prefix = @prefix@
305program_transform_name = @program_transform_name@
306psdir = @psdir@
307saveCC = @saveCC@
308saveCXX = @saveCXX@
309sbindir = @sbindir@
310sharedstatedir = @sharedstatedir@
311srcdir = @srcdir@
312sysconfdir = @sysconfdir@
313target_alias = @target_alias@
314top_build_prefix = @top_build_prefix@
315top_builddir = @top_builddir@
316top_srcdir = @top_srcdir@
317SUBDIRS = adolc
318all: all-recursive
319
320.SUFFIXES:
321$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
322        @for dep in $?; do \
323          case '$(am__configure_deps)' in \
324            *$$dep*) \
325              ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
326                && { if test -f $@; then exit 0; else break; fi; }; \
327              exit 1;; \
328          esac; \
329        done; \
330        echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign ADOL-C/include/Makefile'; \
331        $(am__cd) $(top_srcdir) && \
332          $(AUTOMAKE) --foreign ADOL-C/include/Makefile
333.PRECIOUS: Makefile
334Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
335        @case '$?' in \
336          *config.status*) \
337            cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
338          *) \
339            echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
340            cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
341        esac;
342
343$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
344        cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
345
346$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
347        cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
348$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
349        cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
350$(am__aclocal_m4_deps):
351
352mostlyclean-libtool:
353        -rm -f *.lo
354
355clean-libtool:
356        -rm -rf .libs _libs
357
358# This directory's subdirectories are mostly independent; you can cd
359# into them and run 'make' without going through this Makefile.
360# To change the values of 'make' variables: instead of editing Makefiles,
361# (1) if the variable is set in 'config.status', edit 'config.status'
362#     (which will cause the Makefiles to be regenerated when you run 'make');
363# (2) otherwise, pass the desired values on the 'make' command line.
364$(am__recursive_targets):
365        @fail=; \
366        if $(am__make_keepgoing); then \
367          failcom='fail=yes'; \
368        else \
369          failcom='exit 1'; \
370        fi; \
371        dot_seen=no; \
372        target=`echo $@ | sed s/-recursive//`; \
373        case "$@" in \
374          distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
375          *) list='$(SUBDIRS)' ;; \
376        esac; \
377        for subdir in $$list; do \
378          echo "Making $$target in $$subdir"; \
379          if test "$$subdir" = "."; then \
380            dot_seen=yes; \
381            local_target="$$target-am"; \
382          else \
383            local_target="$$target"; \
384          fi; \
385          ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
386          || eval $$failcom; \
387        done; \
388        if test "$$dot_seen" = "no"; then \
389          $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
390        fi; test -z "$$fail"
391
392ID: $(am__tagged_files)
393        $(am__define_uniq_tagged_files); mkid -fID $$unique
394tags: tags-recursive
395TAGS: tags
396
397tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
398        set x; \
399        here=`pwd`; \
400        if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
401          include_option=--etags-include; \
402          empty_fix=.; \
403        else \
404          include_option=--include; \
405          empty_fix=; \
406        fi; \
407        list='$(SUBDIRS)'; for subdir in $$list; do \
408          if test "$$subdir" = .; then :; else \
409            test ! -f $$subdir/TAGS || \
410              set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
411          fi; \
412        done; \
413        $(am__define_uniq_tagged_files); \
414        shift; \
415        if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
416          test -n "$$unique" || unique=$$empty_fix; \
417          if test $$# -gt 0; then \
418            $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
419              "$$@" $$unique; \
420          else \
421            $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
422              $$unique; \
423          fi; \
424        fi
425ctags: ctags-recursive
426
427CTAGS: ctags
428ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
429        $(am__define_uniq_tagged_files); \
430        test -z "$(CTAGS_ARGS)$$unique" \
431          || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
432             $$unique
433
434GTAGS:
435        here=`$(am__cd) $(top_builddir) && pwd` \
436          && $(am__cd) $(top_srcdir) \
437          && gtags -i $(GTAGS_ARGS) "$$here"
438cscopelist: cscopelist-recursive
439
440cscopelist-am: $(am__tagged_files)
441        list='$(am__tagged_files)'; \
442        case "$(srcdir)" in \
443          [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
444          *) sdir=$(subdir)/$(srcdir) ;; \
445        esac; \
446        for i in $$list; do \
447          if test -f "$$i"; then \
448            echo "$(subdir)/$$i"; \
449          else \
450            echo "$$sdir/$$i"; \
451          fi; \
452        done >> $(top_builddir)/cscope.files
453
454distclean-tags:
455        -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
456
457distdir: $(DISTFILES)
458        @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
459        topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
460        list='$(DISTFILES)'; \
461          dist_files=`for file in $$list; do echo $$file; done | \
462          sed -e "s|^$$srcdirstrip/||;t" \
463              -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
464        case $$dist_files in \
465          */*) $(MKDIR_P) `echo "$$dist_files" | \
466                           sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
467                           sort -u` ;; \
468        esac; \
469        for file in $$dist_files; do \
470          if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
471          if test -d $$d/$$file; then \
472            dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
473            if test -d "$(distdir)/$$file"; then \
474              find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
475            fi; \
476            if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
477              cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
478              find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
479            fi; \
480            cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
481          else \
482            test -f "$(distdir)/$$file" \
483            || cp -p $$d/$$file "$(distdir)/$$file" \
484            || exit 1; \
485          fi; \
486        done
487        @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
488          if test "$$subdir" = .; then :; else \
489            $(am__make_dryrun) \
490              || test -d "$(distdir)/$$subdir" \
491              || $(MKDIR_P) "$(distdir)/$$subdir" \
492              || exit 1; \
493            dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
494            $(am__relativize); \
495            new_distdir=$$reldir; \
496            dir1=$$subdir; dir2="$(top_distdir)"; \
497            $(am__relativize); \
498            new_top_distdir=$$reldir; \
499            echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
500            echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
501            ($(am__cd) $$subdir && \
502              $(MAKE) $(AM_MAKEFLAGS) \
503                top_distdir="$$new_top_distdir" \
504                distdir="$$new_distdir" \
505                am__remove_distdir=: \
506                am__skip_length_check=: \
507                am__skip_mode_fix=: \
508                distdir) \
509              || exit 1; \
510          fi; \
511        done
512check-am: all-am
513check: check-recursive
514all-am: Makefile
515installdirs: installdirs-recursive
516installdirs-am:
517install: install-recursive
518install-exec: install-exec-recursive
519install-data: install-data-recursive
520uninstall: uninstall-recursive
521
522install-am: all-am
523        @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
524
525installcheck: installcheck-recursive
526install-strip:
527        if test -z '$(STRIP)'; then \
528          $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
529            install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
530              install; \
531        else \
532          $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
533            install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
534            "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
535        fi
536mostlyclean-generic:
537
538clean-generic:
539
540distclean-generic:
541        -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
542        -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
543
544maintainer-clean-generic:
545        @echo "This command is intended for maintainers to use"
546        @echo "it deletes files that may require special tools to rebuild."
547clean: clean-recursive
548
549clean-am: clean-generic clean-libtool mostlyclean-am
550
551distclean: distclean-recursive
552        -rm -f Makefile
553distclean-am: clean-am distclean-generic distclean-tags
554
555dvi: dvi-recursive
556
557dvi-am:
558
559html: html-recursive
560
561html-am:
562
563info: info-recursive
564
565info-am:
566
567install-data-am:
568
569install-dvi: install-dvi-recursive
570
571install-dvi-am:
572
573install-exec-am:
574
575install-html: install-html-recursive
576
577install-html-am:
578
579install-info: install-info-recursive
580
581install-info-am:
582
583install-man:
584
585install-pdf: install-pdf-recursive
586
587install-pdf-am:
588
589install-ps: install-ps-recursive
590
591install-ps-am:
592
593installcheck-am:
594
595maintainer-clean: maintainer-clean-recursive
596        -rm -f Makefile
597maintainer-clean-am: distclean-am maintainer-clean-generic
598
599mostlyclean: mostlyclean-recursive
600
601mostlyclean-am: mostlyclean-generic mostlyclean-libtool
602
603pdf: pdf-recursive
604
605pdf-am:
606
607ps: ps-recursive
608
609ps-am:
610
611uninstall-am:
612
613.MAKE: $(am__recursive_targets) install-am install-strip
614
615.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am check \
616        check-am clean clean-generic clean-libtool cscopelist-am ctags \
617        ctags-am distclean distclean-generic distclean-libtool \
618        distclean-tags distdir dvi dvi-am html html-am info info-am \
619        install install-am install-data install-data-am install-dvi \
620        install-dvi-am install-exec install-exec-am install-html \
621        install-html-am install-info install-info-am install-man \
622        install-pdf install-pdf-am install-ps install-ps-am \
623        install-strip installcheck installcheck-am installdirs \
624        installdirs-am maintainer-clean maintainer-clean-generic \
625        mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \
626        ps ps-am tags tags-am uninstall uninstall-am
627
628
629# Tell versions [3.59,3.63) of GNU make to not export all variables.
630# Otherwise a system limit (for SysV at least) may be exceeded.
631.NOEXPORT:
Note: See TracBrowser for help on using the repository browser.