source: trunk/ADOL-C/examples/additional_examples/Makefile.in @ 517

Last change on this file since 517 was 517, checked in by kulshres, 6 years ago

regenerate files

Signed-off-by: Kshitij Kulshreshtha <kshitij@…>

File size: 19.5 KB
Line 
1# Makefile.in generated by automake 1.13.4 from Makefile.am.
2# @configure_input@
3
4# Copyright (C) 1994-2013 Free Software Foundation, Inc.
5
6# This Makefile.in is free software; the Free Software Foundation
7# gives unlimited permission to copy and/or distribute it,
8# with or without modifications, as long as this notice is preserved.
9
10# This program is distributed in the hope that it will be useful,
11# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
12# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
13# PARTICULAR PURPOSE.
14
15@SET_MAKE@
16
17##############################################################################
18##############################################################################
19VPATH = @srcdir@
20am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
21am__make_running_with_option = \
22  case $${target_option-} in \
23      ?) ;; \
24      *) echo "am__make_running_with_option: internal error: invalid" \
25              "target option '$${target_option-}' specified" >&2; \
26         exit 1;; \
27  esac; \
28  has_opt=no; \
29  sane_makeflags=$$MAKEFLAGS; \
30  if $(am__is_gnu_make); then \
31    sane_makeflags=$$MFLAGS; \
32  else \
33    case $$MAKEFLAGS in \
34      *\\[\ \   ]*) \
35        bs=\\; \
36        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
37          | sed "s/$$bs$$bs[$$bs $$bs   ]*//g"`;; \
38    esac; \
39  fi; \
40  skip_next=no; \
41  strip_trailopt () \
42  { \
43    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
44  }; \
45  for flg in $$sane_makeflags; do \
46    test $$skip_next = yes && { skip_next=no; continue; }; \
47    case $$flg in \
48      *=*|--*) continue;; \
49        -*I) strip_trailopt 'I'; skip_next=yes;; \
50      -*I?*) strip_trailopt 'I';; \
51        -*O) strip_trailopt 'O'; skip_next=yes;; \
52      -*O?*) strip_trailopt 'O';; \
53        -*l) strip_trailopt 'l'; skip_next=yes;; \
54      -*l?*) strip_trailopt 'l';; \
55      -[dEDm]) skip_next=yes;; \
56      -[JT]) skip_next=yes;; \
57    esac; \
58    case $$flg in \
59      *$$target_option*) has_opt=yes; break;; \
60    esac; \
61  done; \
62  test $$has_opt = yes
63am__make_dryrun = (target_option=n; $(am__make_running_with_option))
64am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
65pkgdatadir = $(datadir)/@PACKAGE@
66pkgincludedir = $(includedir)/@PACKAGE@
67pkglibdir = $(libdir)/@PACKAGE@
68pkglibexecdir = $(libexecdir)/@PACKAGE@
69am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
70install_sh_DATA = $(install_sh) -c -m 644
71install_sh_PROGRAM = $(install_sh) -c
72install_sh_SCRIPT = $(install_sh) -c
73INSTALL_HEADER = $(INSTALL_DATA)
74transform = $(program_transform_name)
75NORMAL_INSTALL = :
76PRE_INSTALL = :
77POST_INSTALL = :
78NORMAL_UNINSTALL = :
79PRE_UNINSTALL = :
80POST_UNINSTALL = :
81build_triplet = @build@
82host_triplet = @host@
83subdir = ADOL-C/examples/additional_examples
84DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am
85ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
86am__aclocal_m4_deps = $(top_srcdir)/autoconf/acx_builtin.m4 \
87        $(top_srcdir)/autoconf/ampi.m4 \
88        $(top_srcdir)/autoconf/colpack.m4 \
89        $(top_srcdir)/autoconf/libtool.m4 \
90        $(top_srcdir)/autoconf/ltoptions.m4 \
91        $(top_srcdir)/autoconf/ltsugar.m4 \
92        $(top_srcdir)/autoconf/ltversion.m4 \
93        $(top_srcdir)/autoconf/lt~obsolete.m4 \
94        $(top_srcdir)/autoconf/mpi.m4 \
95        $(top_srcdir)/autoconf/stdcxx_11.m4 $(top_srcdir)/configure.ac
96am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
97        $(ACLOCAL_M4)
98mkinstalldirs = $(install_sh) -d
99CONFIG_HEADER = $(top_builddir)/ADOL-C/src/config.h
100CONFIG_CLEAN_FILES =
101CONFIG_CLEAN_VPATH_FILES =
102AM_V_P = $(am__v_P_@AM_V@)
103am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
104am__v_P_0 = false
105am__v_P_1 = :
106AM_V_GEN = $(am__v_GEN_@AM_V@)
107am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
108am__v_GEN_0 = @echo "  GEN     " $@;
109am__v_GEN_1 =
110AM_V_at = $(am__v_at_@AM_V@)
111am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
112am__v_at_0 = @
113am__v_at_1 =
114SOURCES =
115DIST_SOURCES =
116RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
117        ctags-recursive dvi-recursive html-recursive info-recursive \
118        install-data-recursive install-dvi-recursive \
119        install-exec-recursive install-html-recursive \
120        install-info-recursive install-pdf-recursive \
121        install-ps-recursive install-recursive installcheck-recursive \
122        installdirs-recursive pdf-recursive ps-recursive \
123        tags-recursive uninstall-recursive
124am__can_run_installinfo = \
125  case $$AM_UPDATE_INFO_DIR in \
126    n|no|NO) false;; \
127    *) (install-info --version) >/dev/null 2>&1;; \
128  esac
129RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
130  distclean-recursive maintainer-clean-recursive
131am__recursive_targets = \
132  $(RECURSIVE_TARGETS) \
133  $(RECURSIVE_CLEAN_TARGETS) \
134  $(am__extra_recursive_targets)
135AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
136        distdir
137am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
138# Read a list of newline-separated strings from the standard input,
139# and print each of them once, without duplicates.  Input order is
140# *not* preserved.
141am__uniquify_input = $(AWK) '\
142  BEGIN { nonempty = 0; } \
143  { items[$$0] = 1; nonempty = 1; } \
144  END { if (nonempty) { for (i in items) print i; }; } \
145'
146# Make sure the list of sources is unique.  This is necessary because,
147# e.g., the same source file might be shared among _SOURCES variables
148# for different programs/libraries.
149am__define_uniq_tagged_files = \
150  list='$(am__tagged_files)'; \
151  unique=`for i in $$list; do \
152    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
153  done | $(am__uniquify_input)`
154ETAGS = etags
155CTAGS = ctags
156DIST_SUBDIRS = clock hessmat lufact ode sparse tapesave timing detexam \
157        helm lighthouse scal speelpenning taylor pow checkpointing \
158        ext_diff_func fixpoint_exam openmp_exam cuda
159DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
160am__relativize = \
161  dir0=`pwd`; \
162  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
163  sed_rest='s,^[^/]*/*,,'; \
164  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
165  sed_butlast='s,/*[^/]*$$,,'; \
166  while test -n "$$dir1"; do \
167    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
168    if test "$$first" != "."; then \
169      if test "$$first" = ".."; then \
170        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
171        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
172      else \
173        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
174        if test "$$first2" = "$$first"; then \
175          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
176        else \
177          dir2="../$$dir2"; \
178        fi; \
179        dir0="$$dir0"/"$$first"; \
180      fi; \
181    fi; \
182    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
183  done; \
184  reldir="$$dir2"
185ACLOCAL = @ACLOCAL@
186ADOLC_PATCHLEVEL = @ADOLC_PATCHLEVEL@
187ADOLC_SUBVERSION = @ADOLC_SUBVERSION@
188ADOLC_VERSION = @ADOLC_VERSION@
189ADVBRANCH = @ADVBRANCH@
190AMTAR = @AMTAR@
191AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
192AR = @AR@
193AS = @AS@
194ATRIG_ERF = @ATRIG_ERF@
195AUTOCONF = @AUTOCONF@
196AUTOHEADER = @AUTOHEADER@
197AUTOMAKE = @AUTOMAKE@
198AWK = @AWK@
199CC = @CC@
200CCDEPMODE = @CCDEPMODE@
201CFLAGS = @CFLAGS@
202CPP = @CPP@
203CPPFLAGS = @CPPFLAGS@
204CXX = @CXX@
205CXXCPP = @CXXCPP@
206CXXDEPMODE = @CXXDEPMODE@
207CXXFLAGS = @CXXFLAGS@
208CYGPATH_W = @CYGPATH_W@
209DEFS = @DEFS@
210DEPDIR = @DEPDIR@
211DLLTOOL = @DLLTOOL@
212DSYMUTIL = @DSYMUTIL@
213DUMPBIN = @DUMPBIN@
214ECHO_C = @ECHO_C@
215ECHO_N = @ECHO_N@
216ECHO_T = @ECHO_T@
217EGREP = @EGREP@
218EXEEXT = @EXEEXT@
219FGREP = @FGREP@
220GREP = @GREP@
221HAVE_CXX11 = @HAVE_CXX11@
222INSTALL = @INSTALL@
223INSTALL_DATA = @INSTALL_DATA@
224INSTALL_PROGRAM = @INSTALL_PROGRAM@
225INSTALL_SCRIPT = @INSTALL_SCRIPT@
226INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
227LD = @LD@
228LDFLAGS = @LDFLAGS@
229LIBOBJS = @LIBOBJS@
230LIBS = @LIBS@
231LIBTOOL = @LIBTOOL@
232LIPO = @LIPO@
233LN_S = @LN_S@
234LTLIBOBJS = @LTLIBOBJS@
235MAINT = @MAINT@
236MAKEINFO = @MAKEINFO@
237MANIFEST_TOOL = @MANIFEST_TOOL@
238MKDIR_P = @MKDIR_P@
239NM = @NM@
240NMEDIT = @NMEDIT@
241OBJDUMP = @OBJDUMP@
242OBJEXT = @OBJEXT@
243OTOOL = @OTOOL@
244OTOOL64 = @OTOOL64@
245PACKAGE = @PACKAGE@
246PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
247PACKAGE_NAME = @PACKAGE_NAME@
248PACKAGE_STRING = @PACKAGE_STRING@
249PACKAGE_TARNAME = @PACKAGE_TARNAME@
250PACKAGE_URL = @PACKAGE_URL@
251PACKAGE_VERSION = @PACKAGE_VERSION@
252PATH_SEPARATOR = @PATH_SEPARATOR@
253RANLIB = @RANLIB@
254REAL_TYPE = @REAL_TYPE@
255SED = @SED@
256SET_MAKE = @SET_MAKE@
257SHELL = @SHELL@
258STRIP = @STRIP@
259UINT_TYPE = @UINT_TYPE@
260VERSION = @VERSION@
261_lib = @_lib@
262abs_builddir = @abs_builddir@
263abs_srcdir = @abs_srcdir@
264abs_top_builddir = @abs_top_builddir@
265abs_top_srcdir = @abs_top_srcdir@
266ac_adolc_cflags = @ac_adolc_cflags@
267ac_adolc_cxxflags = @ac_adolc_cxxflags@
268ac_aux_dir = @ac_aux_dir@
269ac_ct_AR = @ac_ct_AR@
270ac_ct_CC = @ac_ct_CC@
271ac_ct_CXX = @ac_ct_CXX@
272ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
273adolclib = @adolclib@
274am__include = @am__include@
275am__leading_dot = @am__leading_dot@
276am__quote = @am__quote@
277am__tar = @am__tar@
278am__untar = @am__untar@
279bindir = @bindir@
280build = @build@
281build_alias = @build_alias@
282build_cpu = @build_cpu@
283build_os = @build_os@
284build_vendor = @build_vendor@
285builddir = @builddir@
286datadir = @datadir@
287datarootdir = @datarootdir@
288docdir = @docdir@
289dvidir = @dvidir@
290exec_prefix = @exec_prefix@
291host = @host@
292host_alias = @host_alias@
293host_cpu = @host_cpu@
294host_os = @host_os@
295host_vendor = @host_vendor@
296htmldir = @htmldir@
297includedir = @includedir@
298infodir = @infodir@
299install_sh = @install_sh@
300libdir = @libdir@
301libexecdir = @libexecdir@
302localedir = @localedir@
303localstatedir = @localstatedir@
304mandir = @mandir@
305mkdir_p = @mkdir_p@
306oldincludedir = @oldincludedir@
307pdfdir = @pdfdir@
308prefix = @prefix@
309program_transform_name = @program_transform_name@
310psdir = @psdir@
311saveCC = @saveCC@
312saveCXX = @saveCXX@
313sbindir = @sbindir@
314sharedstatedir = @sharedstatedir@
315srcdir = @srcdir@
316sysconfdir = @sysconfdir@
317target_alias = @target_alias@
318top_build_prefix = @top_build_prefix@
319top_builddir = @top_builddir@
320top_srcdir = @top_srcdir@
321MAINTAINERCLEANFILES = Makefile.in *~
322@ADDEXA_TRUE@SUBDIRS = clock hessmat lufact ode sparse tapesave timing \
323@ADDEXA_TRUE@                       detexam helm lighthouse scal speelpenning taylor pow \
324@ADDEXA_TRUE@                       checkpointing ext_diff_func fixpoint_exam openmp_exam \
325@ADDEXA_TRUE@                       cuda
326
327@PAREXA_TRUE@SUBDIRS = clock hessmat lufact ode sparse tapesave timing \
328@PAREXA_TRUE@                       detexam helm lighthouse scal speelpenning taylor pow \
329@PAREXA_TRUE@                       checkpointing ext_diff_func fixpoint_exam openmp_exam \
330@PAREXA_TRUE@                       cuda
331
332all: all-recursive
333
334.SUFFIXES:
335$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
336        @for dep in $?; do \
337          case '$(am__configure_deps)' in \
338            *$$dep*) \
339              ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
340                && { if test -f $@; then exit 0; else break; fi; }; \
341              exit 1;; \
342          esac; \
343        done; \
344        echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign ADOL-C/examples/additional_examples/Makefile'; \
345        $(am__cd) $(top_srcdir) && \
346          $(AUTOMAKE) --foreign ADOL-C/examples/additional_examples/Makefile
347.PRECIOUS: Makefile
348Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
349        @case '$?' in \
350          *config.status*) \
351            cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
352          *) \
353            echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
354            cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
355        esac;
356
357$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
358        cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
359
360$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
361        cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
362$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
363        cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
364$(am__aclocal_m4_deps):
365
366mostlyclean-libtool:
367        -rm -f *.lo
368
369clean-libtool:
370        -rm -rf .libs _libs
371
372# This directory's subdirectories are mostly independent; you can cd
373# into them and run 'make' without going through this Makefile.
374# To change the values of 'make' variables: instead of editing Makefiles,
375# (1) if the variable is set in 'config.status', edit 'config.status'
376#     (which will cause the Makefiles to be regenerated when you run 'make');
377# (2) otherwise, pass the desired values on the 'make' command line.
378$(am__recursive_targets):
379        @fail=; \
380        if $(am__make_keepgoing); then \
381          failcom='fail=yes'; \
382        else \
383          failcom='exit 1'; \
384        fi; \
385        dot_seen=no; \
386        target=`echo $@ | sed s/-recursive//`; \
387        case "$@" in \
388          distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
389          *) list='$(SUBDIRS)' ;; \
390        esac; \
391        for subdir in $$list; do \
392          echo "Making $$target in $$subdir"; \
393          if test "$$subdir" = "."; then \
394            dot_seen=yes; \
395            local_target="$$target-am"; \
396          else \
397            local_target="$$target"; \
398          fi; \
399          ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
400          || eval $$failcom; \
401        done; \
402        if test "$$dot_seen" = "no"; then \
403          $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
404        fi; test -z "$$fail"
405
406ID: $(am__tagged_files)
407        $(am__define_uniq_tagged_files); mkid -fID $$unique
408tags: tags-recursive
409TAGS: tags
410
411tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
412        set x; \
413        here=`pwd`; \
414        if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
415          include_option=--etags-include; \
416          empty_fix=.; \
417        else \
418          include_option=--include; \
419          empty_fix=; \
420        fi; \
421        list='$(SUBDIRS)'; for subdir in $$list; do \
422          if test "$$subdir" = .; then :; else \
423            test ! -f $$subdir/TAGS || \
424              set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
425          fi; \
426        done; \
427        $(am__define_uniq_tagged_files); \
428        shift; \
429        if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
430          test -n "$$unique" || unique=$$empty_fix; \
431          if test $$# -gt 0; then \
432            $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
433              "$$@" $$unique; \
434          else \
435            $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
436              $$unique; \
437          fi; \
438        fi
439ctags: ctags-recursive
440
441CTAGS: ctags
442ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
443        $(am__define_uniq_tagged_files); \
444        test -z "$(CTAGS_ARGS)$$unique" \
445          || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
446             $$unique
447
448GTAGS:
449        here=`$(am__cd) $(top_builddir) && pwd` \
450          && $(am__cd) $(top_srcdir) \
451          && gtags -i $(GTAGS_ARGS) "$$here"
452cscopelist: cscopelist-recursive
453
454cscopelist-am: $(am__tagged_files)
455        list='$(am__tagged_files)'; \
456        case "$(srcdir)" in \
457          [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
458          *) sdir=$(subdir)/$(srcdir) ;; \
459        esac; \
460        for i in $$list; do \
461          if test -f "$$i"; then \
462            echo "$(subdir)/$$i"; \
463          else \
464            echo "$$sdir/$$i"; \
465          fi; \
466        done >> $(top_builddir)/cscope.files
467
468distclean-tags:
469        -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
470
471distdir: $(DISTFILES)
472        @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
473        topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
474        list='$(DISTFILES)'; \
475          dist_files=`for file in $$list; do echo $$file; done | \
476          sed -e "s|^$$srcdirstrip/||;t" \
477              -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
478        case $$dist_files in \
479          */*) $(MKDIR_P) `echo "$$dist_files" | \
480                           sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
481                           sort -u` ;; \
482        esac; \
483        for file in $$dist_files; do \
484          if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
485          if test -d $$d/$$file; then \
486            dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
487            if test -d "$(distdir)/$$file"; then \
488              find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
489            fi; \
490            if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
491              cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
492              find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
493            fi; \
494            cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
495          else \
496            test -f "$(distdir)/$$file" \
497            || cp -p $$d/$$file "$(distdir)/$$file" \
498            || exit 1; \
499          fi; \
500        done
501        @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
502          if test "$$subdir" = .; then :; else \
503            $(am__make_dryrun) \
504              || test -d "$(distdir)/$$subdir" \
505              || $(MKDIR_P) "$(distdir)/$$subdir" \
506              || exit 1; \
507            dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
508            $(am__relativize); \
509            new_distdir=$$reldir; \
510            dir1=$$subdir; dir2="$(top_distdir)"; \
511            $(am__relativize); \
512            new_top_distdir=$$reldir; \
513            echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
514            echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
515            ($(am__cd) $$subdir && \
516              $(MAKE) $(AM_MAKEFLAGS) \
517                top_distdir="$$new_top_distdir" \
518                distdir="$$new_distdir" \
519                am__remove_distdir=: \
520                am__skip_length_check=: \
521                am__skip_mode_fix=: \
522                distdir) \
523              || exit 1; \
524          fi; \
525        done
526check-am: all-am
527check: check-recursive
528all-am: Makefile
529installdirs: installdirs-recursive
530installdirs-am:
531install: install-recursive
532install-exec: install-exec-recursive
533install-data: install-data-recursive
534uninstall: uninstall-recursive
535
536install-am: all-am
537        @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
538
539installcheck: installcheck-recursive
540install-strip:
541        if test -z '$(STRIP)'; then \
542          $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
543            install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
544              install; \
545        else \
546          $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
547            install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
548            "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
549        fi
550mostlyclean-generic:
551
552clean-generic:
553
554distclean-generic:
555        -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
556        -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
557
558maintainer-clean-generic:
559        @echo "This command is intended for maintainers to use"
560        @echo "it deletes files that may require special tools to rebuild."
561        -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
562clean: clean-recursive
563
564clean-am: clean-generic clean-libtool mostlyclean-am
565
566distclean: distclean-recursive
567        -rm -f Makefile
568distclean-am: clean-am distclean-generic distclean-tags
569
570dvi: dvi-recursive
571
572dvi-am:
573
574html: html-recursive
575
576html-am:
577
578info: info-recursive
579
580info-am:
581
582install-data-am:
583
584install-dvi: install-dvi-recursive
585
586install-dvi-am:
587
588install-exec-am:
589
590install-html: install-html-recursive
591
592install-html-am:
593
594install-info: install-info-recursive
595
596install-info-am:
597
598install-man:
599
600install-pdf: install-pdf-recursive
601
602install-pdf-am:
603
604install-ps: install-ps-recursive
605
606install-ps-am:
607
608installcheck-am:
609
610maintainer-clean: maintainer-clean-recursive
611        -rm -f Makefile
612maintainer-clean-am: distclean-am maintainer-clean-generic
613
614mostlyclean: mostlyclean-recursive
615
616mostlyclean-am: mostlyclean-generic mostlyclean-libtool
617
618pdf: pdf-recursive
619
620pdf-am:
621
622ps: ps-recursive
623
624ps-am:
625
626uninstall-am:
627
628.MAKE: $(am__recursive_targets) install-am install-strip
629
630.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am check \
631        check-am clean clean-generic clean-libtool cscopelist-am ctags \
632        ctags-am distclean distclean-generic distclean-libtool \
633        distclean-tags distdir dvi dvi-am html html-am info info-am \
634        install install-am install-data install-data-am install-dvi \
635        install-dvi-am install-exec install-exec-am install-html \
636        install-html-am install-info install-info-am install-man \
637        install-pdf install-pdf-am install-ps install-ps-am \
638        install-strip installcheck installcheck-am installdirs \
639        installdirs-am maintainer-clean maintainer-clean-generic \
640        mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \
641        ps ps-am tags tags-am uninstall uninstall-am
642
643
644# Tell versions [3.59,3.63) of GNU make to not export all variables.
645# Otherwise a system limit (for SysV at least) may be exceeded.
646.NOEXPORT:
Note: See TracBrowser for help on using the repository browser.