source: trunk/ADOL-C/examples/additional_examples/Makefile.in @ 472

Last change on this file since 472 was 472, checked in by kulshres, 6 years ago

regenerate files

Signed-off-by: Kshitij Kulshreshtha <kshitij@…>

File size: 19.4 KB
Line 
1# Makefile.in generated by automake 1.13.4 from Makefile.am.
2# @configure_input@
3
4# Copyright (C) 1994-2013 Free Software Foundation, Inc.
5
6# This Makefile.in is free software; the Free Software Foundation
7# gives unlimited permission to copy and/or distribute it,
8# with or without modifications, as long as this notice is preserved.
9
10# This program is distributed in the hope that it will be useful,
11# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
12# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
13# PARTICULAR PURPOSE.
14
15@SET_MAKE@
16
17##############################################################################
18##############################################################################
19VPATH = @srcdir@
20am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
21am__make_running_with_option = \
22  case $${target_option-} in \
23      ?) ;; \
24      *) echo "am__make_running_with_option: internal error: invalid" \
25              "target option '$${target_option-}' specified" >&2; \
26         exit 1;; \
27  esac; \
28  has_opt=no; \
29  sane_makeflags=$$MAKEFLAGS; \
30  if $(am__is_gnu_make); then \
31    sane_makeflags=$$MFLAGS; \
32  else \
33    case $$MAKEFLAGS in \
34      *\\[\ \   ]*) \
35        bs=\\; \
36        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
37          | sed "s/$$bs$$bs[$$bs $$bs   ]*//g"`;; \
38    esac; \
39  fi; \
40  skip_next=no; \
41  strip_trailopt () \
42  { \
43    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
44  }; \
45  for flg in $$sane_makeflags; do \
46    test $$skip_next = yes && { skip_next=no; continue; }; \
47    case $$flg in \
48      *=*|--*) continue;; \
49        -*I) strip_trailopt 'I'; skip_next=yes;; \
50      -*I?*) strip_trailopt 'I';; \
51        -*O) strip_trailopt 'O'; skip_next=yes;; \
52      -*O?*) strip_trailopt 'O';; \
53        -*l) strip_trailopt 'l'; skip_next=yes;; \
54      -*l?*) strip_trailopt 'l';; \
55      -[dEDm]) skip_next=yes;; \
56      -[JT]) skip_next=yes;; \
57    esac; \
58    case $$flg in \
59      *$$target_option*) has_opt=yes; break;; \
60    esac; \
61  done; \
62  test $$has_opt = yes
63am__make_dryrun = (target_option=n; $(am__make_running_with_option))
64am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
65pkgdatadir = $(datadir)/@PACKAGE@
66pkgincludedir = $(includedir)/@PACKAGE@
67pkglibdir = $(libdir)/@PACKAGE@
68pkglibexecdir = $(libexecdir)/@PACKAGE@
69am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
70install_sh_DATA = $(install_sh) -c -m 644
71install_sh_PROGRAM = $(install_sh) -c
72install_sh_SCRIPT = $(install_sh) -c
73INSTALL_HEADER = $(INSTALL_DATA)
74transform = $(program_transform_name)
75NORMAL_INSTALL = :
76PRE_INSTALL = :
77POST_INSTALL = :
78NORMAL_UNINSTALL = :
79PRE_UNINSTALL = :
80POST_UNINSTALL = :
81build_triplet = @build@
82host_triplet = @host@
83subdir = ADOL-C/examples/additional_examples
84DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am
85ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
86am__aclocal_m4_deps = $(top_srcdir)/autoconf/acx_builtin.m4 \
87        $(top_srcdir)/autoconf/ampi.m4 \
88        $(top_srcdir)/autoconf/colpack.m4 \
89        $(top_srcdir)/autoconf/libtool.m4 \
90        $(top_srcdir)/autoconf/ltoptions.m4 \
91        $(top_srcdir)/autoconf/ltsugar.m4 \
92        $(top_srcdir)/autoconf/ltversion.m4 \
93        $(top_srcdir)/autoconf/lt~obsolete.m4 \
94        $(top_srcdir)/autoconf/mpi.m4 $(top_srcdir)/configure.ac
95am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
96        $(ACLOCAL_M4)
97mkinstalldirs = $(install_sh) -d
98CONFIG_HEADER = $(top_builddir)/ADOL-C/src/config.h
99CONFIG_CLEAN_FILES =
100CONFIG_CLEAN_VPATH_FILES =
101AM_V_P = $(am__v_P_@AM_V@)
102am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
103am__v_P_0 = false
104am__v_P_1 = :
105AM_V_GEN = $(am__v_GEN_@AM_V@)
106am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
107am__v_GEN_0 = @echo "  GEN     " $@;
108am__v_GEN_1 =
109AM_V_at = $(am__v_at_@AM_V@)
110am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
111am__v_at_0 = @
112am__v_at_1 =
113SOURCES =
114DIST_SOURCES =
115RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
116        ctags-recursive dvi-recursive html-recursive info-recursive \
117        install-data-recursive install-dvi-recursive \
118        install-exec-recursive install-html-recursive \
119        install-info-recursive install-pdf-recursive \
120        install-ps-recursive install-recursive installcheck-recursive \
121        installdirs-recursive pdf-recursive ps-recursive \
122        tags-recursive uninstall-recursive
123am__can_run_installinfo = \
124  case $$AM_UPDATE_INFO_DIR in \
125    n|no|NO) false;; \
126    *) (install-info --version) >/dev/null 2>&1;; \
127  esac
128RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
129  distclean-recursive maintainer-clean-recursive
130am__recursive_targets = \
131  $(RECURSIVE_TARGETS) \
132  $(RECURSIVE_CLEAN_TARGETS) \
133  $(am__extra_recursive_targets)
134AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
135        distdir
136am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
137# Read a list of newline-separated strings from the standard input,
138# and print each of them once, without duplicates.  Input order is
139# *not* preserved.
140am__uniquify_input = $(AWK) '\
141  BEGIN { nonempty = 0; } \
142  { items[$$0] = 1; nonempty = 1; } \
143  END { if (nonempty) { for (i in items) print i; }; } \
144'
145# Make sure the list of sources is unique.  This is necessary because,
146# e.g., the same source file might be shared among _SOURCES variables
147# for different programs/libraries.
148am__define_uniq_tagged_files = \
149  list='$(am__tagged_files)'; \
150  unique=`for i in $$list; do \
151    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
152  done | $(am__uniquify_input)`
153ETAGS = etags
154CTAGS = ctags
155DIST_SUBDIRS = clock hessmat lufact ode sparse tapesave timing detexam \
156        helm lighthouse scal speelpenning taylor pow checkpointing \
157        ext_diff_func fixpoint_exam openmp_exam cuda
158DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
159am__relativize = \
160  dir0=`pwd`; \
161  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
162  sed_rest='s,^[^/]*/*,,'; \
163  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
164  sed_butlast='s,/*[^/]*$$,,'; \
165  while test -n "$$dir1"; do \
166    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
167    if test "$$first" != "."; then \
168      if test "$$first" = ".."; then \
169        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
170        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
171      else \
172        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
173        if test "$$first2" = "$$first"; then \
174          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
175        else \
176          dir2="../$$dir2"; \
177        fi; \
178        dir0="$$dir0"/"$$first"; \
179      fi; \
180    fi; \
181    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
182  done; \
183  reldir="$$dir2"
184ACLOCAL = @ACLOCAL@
185ADOLC_PATCHLEVEL = @ADOLC_PATCHLEVEL@
186ADOLC_SUBVERSION = @ADOLC_SUBVERSION@
187ADOLC_VERSION = @ADOLC_VERSION@
188ADVBRANCH = @ADVBRANCH@
189AMTAR = @AMTAR@
190AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
191AR = @AR@
192AS = @AS@
193ATRIG_ERF = @ATRIG_ERF@
194AUTOCONF = @AUTOCONF@
195AUTOHEADER = @AUTOHEADER@
196AUTOMAKE = @AUTOMAKE@
197AWK = @AWK@
198CC = @CC@
199CCDEPMODE = @CCDEPMODE@
200CFLAGS = @CFLAGS@
201CPP = @CPP@
202CPPFLAGS = @CPPFLAGS@
203CXX = @CXX@
204CXXCPP = @CXXCPP@
205CXXDEPMODE = @CXXDEPMODE@
206CXXFLAGS = @CXXFLAGS@
207CYGPATH_W = @CYGPATH_W@
208DEFS = @DEFS@
209DEPDIR = @DEPDIR@
210DLLTOOL = @DLLTOOL@
211DSYMUTIL = @DSYMUTIL@
212DUMPBIN = @DUMPBIN@
213ECHO_C = @ECHO_C@
214ECHO_N = @ECHO_N@
215ECHO_T = @ECHO_T@
216EGREP = @EGREP@
217EXEEXT = @EXEEXT@
218FGREP = @FGREP@
219GREP = @GREP@
220INSTALL = @INSTALL@
221INSTALL_DATA = @INSTALL_DATA@
222INSTALL_PROGRAM = @INSTALL_PROGRAM@
223INSTALL_SCRIPT = @INSTALL_SCRIPT@
224INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
225LD = @LD@
226LDFLAGS = @LDFLAGS@
227LIBOBJS = @LIBOBJS@
228LIBS = @LIBS@
229LIBTOOL = @LIBTOOL@
230LIPO = @LIPO@
231LN_S = @LN_S@
232LTLIBOBJS = @LTLIBOBJS@
233MAINT = @MAINT@
234MAKEINFO = @MAKEINFO@
235MANIFEST_TOOL = @MANIFEST_TOOL@
236MKDIR_P = @MKDIR_P@
237NM = @NM@
238NMEDIT = @NMEDIT@
239OBJDUMP = @OBJDUMP@
240OBJEXT = @OBJEXT@
241OTOOL = @OTOOL@
242OTOOL64 = @OTOOL64@
243PACKAGE = @PACKAGE@
244PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
245PACKAGE_NAME = @PACKAGE_NAME@
246PACKAGE_STRING = @PACKAGE_STRING@
247PACKAGE_TARNAME = @PACKAGE_TARNAME@
248PACKAGE_URL = @PACKAGE_URL@
249PACKAGE_VERSION = @PACKAGE_VERSION@
250PATH_SEPARATOR = @PATH_SEPARATOR@
251RANLIB = @RANLIB@
252REAL_TYPE = @REAL_TYPE@
253SED = @SED@
254SET_MAKE = @SET_MAKE@
255SHELL = @SHELL@
256STRIP = @STRIP@
257UINT_TYPE = @UINT_TYPE@
258VERSION = @VERSION@
259_lib = @_lib@
260abs_builddir = @abs_builddir@
261abs_srcdir = @abs_srcdir@
262abs_top_builddir = @abs_top_builddir@
263abs_top_srcdir = @abs_top_srcdir@
264ac_adolc_cflags = @ac_adolc_cflags@
265ac_adolc_cxxflags = @ac_adolc_cxxflags@
266ac_aux_dir = @ac_aux_dir@
267ac_ct_AR = @ac_ct_AR@
268ac_ct_CC = @ac_ct_CC@
269ac_ct_CXX = @ac_ct_CXX@
270ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
271adolclib = @adolclib@
272am__include = @am__include@
273am__leading_dot = @am__leading_dot@
274am__quote = @am__quote@
275am__tar = @am__tar@
276am__untar = @am__untar@
277bindir = @bindir@
278build = @build@
279build_alias = @build_alias@
280build_cpu = @build_cpu@
281build_os = @build_os@
282build_vendor = @build_vendor@
283builddir = @builddir@
284datadir = @datadir@
285datarootdir = @datarootdir@
286docdir = @docdir@
287dvidir = @dvidir@
288exec_prefix = @exec_prefix@
289host = @host@
290host_alias = @host_alias@
291host_cpu = @host_cpu@
292host_os = @host_os@
293host_vendor = @host_vendor@
294htmldir = @htmldir@
295includedir = @includedir@
296infodir = @infodir@
297install_sh = @install_sh@
298libdir = @libdir@
299libexecdir = @libexecdir@
300localedir = @localedir@
301localstatedir = @localstatedir@
302mandir = @mandir@
303mkdir_p = @mkdir_p@
304oldincludedir = @oldincludedir@
305pdfdir = @pdfdir@
306prefix = @prefix@
307program_transform_name = @program_transform_name@
308psdir = @psdir@
309saveCC = @saveCC@
310saveCXX = @saveCXX@
311sbindir = @sbindir@
312sharedstatedir = @sharedstatedir@
313srcdir = @srcdir@
314sysconfdir = @sysconfdir@
315target_alias = @target_alias@
316top_build_prefix = @top_build_prefix@
317top_builddir = @top_builddir@
318top_srcdir = @top_srcdir@
319MAINTAINERCLEANFILES = Makefile.in *~
320@ADDEXA_TRUE@SUBDIRS = clock hessmat lufact ode sparse tapesave timing \
321@ADDEXA_TRUE@                       detexam helm lighthouse scal speelpenning taylor pow \
322@ADDEXA_TRUE@                       checkpointing ext_diff_func fixpoint_exam openmp_exam \
323@ADDEXA_TRUE@                       cuda
324
325@PAREXA_TRUE@SUBDIRS = clock hessmat lufact ode sparse tapesave timing \
326@PAREXA_TRUE@                       detexam helm lighthouse scal speelpenning taylor pow \
327@PAREXA_TRUE@                       checkpointing ext_diff_func fixpoint_exam openmp_exam \
328@PAREXA_TRUE@                       cuda
329
330all: all-recursive
331
332.SUFFIXES:
333$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
334        @for dep in $?; do \
335          case '$(am__configure_deps)' in \
336            *$$dep*) \
337              ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
338                && { if test -f $@; then exit 0; else break; fi; }; \
339              exit 1;; \
340          esac; \
341        done; \
342        echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign ADOL-C/examples/additional_examples/Makefile'; \
343        $(am__cd) $(top_srcdir) && \
344          $(AUTOMAKE) --foreign ADOL-C/examples/additional_examples/Makefile
345.PRECIOUS: Makefile
346Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
347        @case '$?' in \
348          *config.status*) \
349            cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
350          *) \
351            echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
352            cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
353        esac;
354
355$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
356        cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
357
358$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
359        cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
360$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
361        cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
362$(am__aclocal_m4_deps):
363
364mostlyclean-libtool:
365        -rm -f *.lo
366
367clean-libtool:
368        -rm -rf .libs _libs
369
370# This directory's subdirectories are mostly independent; you can cd
371# into them and run 'make' without going through this Makefile.
372# To change the values of 'make' variables: instead of editing Makefiles,
373# (1) if the variable is set in 'config.status', edit 'config.status'
374#     (which will cause the Makefiles to be regenerated when you run 'make');
375# (2) otherwise, pass the desired values on the 'make' command line.
376$(am__recursive_targets):
377        @fail=; \
378        if $(am__make_keepgoing); then \
379          failcom='fail=yes'; \
380        else \
381          failcom='exit 1'; \
382        fi; \
383        dot_seen=no; \
384        target=`echo $@ | sed s/-recursive//`; \
385        case "$@" in \
386          distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
387          *) list='$(SUBDIRS)' ;; \
388        esac; \
389        for subdir in $$list; do \
390          echo "Making $$target in $$subdir"; \
391          if test "$$subdir" = "."; then \
392            dot_seen=yes; \
393            local_target="$$target-am"; \
394          else \
395            local_target="$$target"; \
396          fi; \
397          ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
398          || eval $$failcom; \
399        done; \
400        if test "$$dot_seen" = "no"; then \
401          $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
402        fi; test -z "$$fail"
403
404ID: $(am__tagged_files)
405        $(am__define_uniq_tagged_files); mkid -fID $$unique
406tags: tags-recursive
407TAGS: tags
408
409tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
410        set x; \
411        here=`pwd`; \
412        if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
413          include_option=--etags-include; \
414          empty_fix=.; \
415        else \
416          include_option=--include; \
417          empty_fix=; \
418        fi; \
419        list='$(SUBDIRS)'; for subdir in $$list; do \
420          if test "$$subdir" = .; then :; else \
421            test ! -f $$subdir/TAGS || \
422              set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
423          fi; \
424        done; \
425        $(am__define_uniq_tagged_files); \
426        shift; \
427        if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
428          test -n "$$unique" || unique=$$empty_fix; \
429          if test $$# -gt 0; then \
430            $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
431              "$$@" $$unique; \
432          else \
433            $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
434              $$unique; \
435          fi; \
436        fi
437ctags: ctags-recursive
438
439CTAGS: ctags
440ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
441        $(am__define_uniq_tagged_files); \
442        test -z "$(CTAGS_ARGS)$$unique" \
443          || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
444             $$unique
445
446GTAGS:
447        here=`$(am__cd) $(top_builddir) && pwd` \
448          && $(am__cd) $(top_srcdir) \
449          && gtags -i $(GTAGS_ARGS) "$$here"
450cscopelist: cscopelist-recursive
451
452cscopelist-am: $(am__tagged_files)
453        list='$(am__tagged_files)'; \
454        case "$(srcdir)" in \
455          [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
456          *) sdir=$(subdir)/$(srcdir) ;; \
457        esac; \
458        for i in $$list; do \
459          if test -f "$$i"; then \
460            echo "$(subdir)/$$i"; \
461          else \
462            echo "$$sdir/$$i"; \
463          fi; \
464        done >> $(top_builddir)/cscope.files
465
466distclean-tags:
467        -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
468
469distdir: $(DISTFILES)
470        @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
471        topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
472        list='$(DISTFILES)'; \
473          dist_files=`for file in $$list; do echo $$file; done | \
474          sed -e "s|^$$srcdirstrip/||;t" \
475              -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
476        case $$dist_files in \
477          */*) $(MKDIR_P) `echo "$$dist_files" | \
478                           sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
479                           sort -u` ;; \
480        esac; \
481        for file in $$dist_files; do \
482          if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
483          if test -d $$d/$$file; then \
484            dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
485            if test -d "$(distdir)/$$file"; then \
486              find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
487            fi; \
488            if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
489              cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
490              find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
491            fi; \
492            cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
493          else \
494            test -f "$(distdir)/$$file" \
495            || cp -p $$d/$$file "$(distdir)/$$file" \
496            || exit 1; \
497          fi; \
498        done
499        @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
500          if test "$$subdir" = .; then :; else \
501            $(am__make_dryrun) \
502              || test -d "$(distdir)/$$subdir" \
503              || $(MKDIR_P) "$(distdir)/$$subdir" \
504              || exit 1; \
505            dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
506            $(am__relativize); \
507            new_distdir=$$reldir; \
508            dir1=$$subdir; dir2="$(top_distdir)"; \
509            $(am__relativize); \
510            new_top_distdir=$$reldir; \
511            echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
512            echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
513            ($(am__cd) $$subdir && \
514              $(MAKE) $(AM_MAKEFLAGS) \
515                top_distdir="$$new_top_distdir" \
516                distdir="$$new_distdir" \
517                am__remove_distdir=: \
518                am__skip_length_check=: \
519                am__skip_mode_fix=: \
520                distdir) \
521              || exit 1; \
522          fi; \
523        done
524check-am: all-am
525check: check-recursive
526all-am: Makefile
527installdirs: installdirs-recursive
528installdirs-am:
529install: install-recursive
530install-exec: install-exec-recursive
531install-data: install-data-recursive
532uninstall: uninstall-recursive
533
534install-am: all-am
535        @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
536
537installcheck: installcheck-recursive
538install-strip:
539        if test -z '$(STRIP)'; then \
540          $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
541            install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
542              install; \
543        else \
544          $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
545            install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
546            "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
547        fi
548mostlyclean-generic:
549
550clean-generic:
551
552distclean-generic:
553        -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
554        -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
555
556maintainer-clean-generic:
557        @echo "This command is intended for maintainers to use"
558        @echo "it deletes files that may require special tools to rebuild."
559        -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
560clean: clean-recursive
561
562clean-am: clean-generic clean-libtool mostlyclean-am
563
564distclean: distclean-recursive
565        -rm -f Makefile
566distclean-am: clean-am distclean-generic distclean-tags
567
568dvi: dvi-recursive
569
570dvi-am:
571
572html: html-recursive
573
574html-am:
575
576info: info-recursive
577
578info-am:
579
580install-data-am:
581
582install-dvi: install-dvi-recursive
583
584install-dvi-am:
585
586install-exec-am:
587
588install-html: install-html-recursive
589
590install-html-am:
591
592install-info: install-info-recursive
593
594install-info-am:
595
596install-man:
597
598install-pdf: install-pdf-recursive
599
600install-pdf-am:
601
602install-ps: install-ps-recursive
603
604install-ps-am:
605
606installcheck-am:
607
608maintainer-clean: maintainer-clean-recursive
609        -rm -f Makefile
610maintainer-clean-am: distclean-am maintainer-clean-generic
611
612mostlyclean: mostlyclean-recursive
613
614mostlyclean-am: mostlyclean-generic mostlyclean-libtool
615
616pdf: pdf-recursive
617
618pdf-am:
619
620ps: ps-recursive
621
622ps-am:
623
624uninstall-am:
625
626.MAKE: $(am__recursive_targets) install-am install-strip
627
628.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am check \
629        check-am clean clean-generic clean-libtool cscopelist-am ctags \
630        ctags-am distclean distclean-generic distclean-libtool \
631        distclean-tags distdir dvi dvi-am html html-am info info-am \
632        install install-am install-data install-data-am install-dvi \
633        install-dvi-am install-exec install-exec-am install-html \
634        install-html-am install-info install-info-am install-man \
635        install-pdf install-pdf-am install-ps install-ps-am \
636        install-strip installcheck installcheck-am installdirs \
637        installdirs-am maintainer-clean maintainer-clean-generic \
638        mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \
639        ps ps-am tags tags-am uninstall uninstall-am
640
641
642# Tell versions [3.59,3.63) of GNU make to not export all variables.
643# Otherwise a system limit (for SysV at least) may be exceeded.
644.NOEXPORT:
Note: See TracBrowser for help on using the repository browser.