source: trunk/ADOL-C/examples/additional_examples/Makefile.in @ 321

Last change on this file since 321 was 321, checked in by kulshres, 7 years ago

regenerate files

Signed-off-by: Kshitij Kulshreshtha <kshitij@…>

File size: 17.8 KB
Line 
1# Makefile.in generated by automake 1.11.1 from Makefile.am.
2# @configure_input@
3
4# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
5# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
6# Inc.
7# This Makefile.in is free software; the Free Software Foundation
8# gives unlimited permission to copy and/or distribute it,
9# with or without modifications, as long as this notice is preserved.
10
11# This program is distributed in the hope that it will be useful,
12# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
13# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
14# PARTICULAR PURPOSE.
15
16@SET_MAKE@
17
18##############################################################################
19##############################################################################
20VPATH = @srcdir@
21pkgdatadir = $(datadir)/@PACKAGE@
22pkgincludedir = $(includedir)/@PACKAGE@
23pkglibdir = $(libdir)/@PACKAGE@
24pkglibexecdir = $(libexecdir)/@PACKAGE@
25am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
26install_sh_DATA = $(install_sh) -c -m 644
27install_sh_PROGRAM = $(install_sh) -c
28install_sh_SCRIPT = $(install_sh) -c
29INSTALL_HEADER = $(INSTALL_DATA)
30transform = $(program_transform_name)
31NORMAL_INSTALL = :
32PRE_INSTALL = :
33POST_INSTALL = :
34NORMAL_UNINSTALL = :
35PRE_UNINSTALL = :
36POST_UNINSTALL = :
37build_triplet = @build@
38host_triplet = @host@
39subdir = ADOL-C/examples/additional_examples
40DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
41ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
42am__aclocal_m4_deps = $(top_srcdir)/configure.ac
43am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
44        $(ACLOCAL_M4)
45mkinstalldirs = $(install_sh) -d
46CONFIG_HEADER = $(top_builddir)/ADOL-C/src/config.h
47CONFIG_CLEAN_FILES =
48CONFIG_CLEAN_VPATH_FILES =
49AM_V_GEN = $(am__v_GEN_$(V))
50am__v_GEN_ = $(am__v_GEN_$(AM_DEFAULT_VERBOSITY))
51am__v_GEN_0 = @echo "  GEN   " $@;
52AM_V_at = $(am__v_at_$(V))
53am__v_at_ = $(am__v_at_$(AM_DEFAULT_VERBOSITY))
54am__v_at_0 = @
55SOURCES =
56DIST_SOURCES =
57RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
58        html-recursive info-recursive install-data-recursive \
59        install-dvi-recursive install-exec-recursive \
60        install-html-recursive install-info-recursive \
61        install-pdf-recursive install-ps-recursive install-recursive \
62        installcheck-recursive installdirs-recursive pdf-recursive \
63        ps-recursive uninstall-recursive
64RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
65  distclean-recursive maintainer-clean-recursive
66AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
67        $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
68        distdir
69ETAGS = etags
70CTAGS = ctags
71DIST_SUBDIRS = clock hessmat lufact ode sparse tapesave timing detexam \
72        helm lighthouse scal speelpenning taylor pow checkpointing \
73        ext_diff_func fixpoint_exam openmp_exam
74DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
75am__relativize = \
76  dir0=`pwd`; \
77  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
78  sed_rest='s,^[^/]*/*,,'; \
79  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
80  sed_butlast='s,/*[^/]*$$,,'; \
81  while test -n "$$dir1"; do \
82    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
83    if test "$$first" != "."; then \
84      if test "$$first" = ".."; then \
85        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
86        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
87      else \
88        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
89        if test "$$first2" = "$$first"; then \
90          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
91        else \
92          dir2="../$$dir2"; \
93        fi; \
94        dir0="$$dir0"/"$$first"; \
95      fi; \
96    fi; \
97    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
98  done; \
99  reldir="$$dir2"
100ACLOCAL = @ACLOCAL@
101ADOLC_PATCHLEVEL = @ADOLC_PATCHLEVEL@
102ADOLC_SUBVERSION = @ADOLC_SUBVERSION@
103ADOLC_VERSION = @ADOLC_VERSION@
104AMTAR = @AMTAR@
105AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
106AR = @AR@
107AS = @AS@
108AUTOCONF = @AUTOCONF@
109AUTOHEADER = @AUTOHEADER@
110AUTOMAKE = @AUTOMAKE@
111AWK = @AWK@
112CC = @CC@
113CCDEPMODE = @CCDEPMODE@
114CFLAGS = @CFLAGS@
115COLPACK_CFLAGS = @COLPACK_CFLAGS@
116COLPACK_LIBS = @COLPACK_LIBS@
117CPP = @CPP@
118CPPFLAGS = @CPPFLAGS@
119CXX = @CXX@
120CXXCPP = @CXXCPP@
121CXXDEPMODE = @CXXDEPMODE@
122CXXFLAGS = @CXXFLAGS@
123CYGPATH_W = @CYGPATH_W@
124DEFS = @DEFS@
125DEPDIR = @DEPDIR@
126DLLTOOL = @DLLTOOL@
127DSYMUTIL = @DSYMUTIL@
128DUMPBIN = @DUMPBIN@
129ECHO_C = @ECHO_C@
130ECHO_N = @ECHO_N@
131ECHO_T = @ECHO_T@
132EGREP = @EGREP@
133EXEEXT = @EXEEXT@
134FGREP = @FGREP@
135GREP = @GREP@
136INSTALL = @INSTALL@
137INSTALL_DATA = @INSTALL_DATA@
138INSTALL_PROGRAM = @INSTALL_PROGRAM@
139INSTALL_SCRIPT = @INSTALL_SCRIPT@
140INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
141LD = @LD@
142LDFLAGS = @LDFLAGS@
143LIBOBJS = @LIBOBJS@
144LIBS = @LIBS@
145LIBTOOL = @LIBTOOL@
146LIPO = @LIPO@
147LN_S = @LN_S@
148LTLIBOBJS = @LTLIBOBJS@
149MAKEINFO = @MAKEINFO@
150MANIFEST_TOOL = @MANIFEST_TOOL@
151MKDIR_P = @MKDIR_P@
152NM = @NM@
153NMEDIT = @NMEDIT@
154OBJDUMP = @OBJDUMP@
155OBJEXT = @OBJEXT@
156OTOOL = @OTOOL@
157OTOOL64 = @OTOOL64@
158PACKAGE = @PACKAGE@
159PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
160PACKAGE_NAME = @PACKAGE_NAME@
161PACKAGE_STRING = @PACKAGE_STRING@
162PACKAGE_TARNAME = @PACKAGE_TARNAME@
163PACKAGE_URL = @PACKAGE_URL@
164PACKAGE_VERSION = @PACKAGE_VERSION@
165PATH_SEPARATOR = @PATH_SEPARATOR@
166RANLIB = @RANLIB@
167SED = @SED@
168SET_MAKE = @SET_MAKE@
169SHELL = @SHELL@
170STRIP = @STRIP@
171VERSION = @VERSION@
172_lib = @_lib@
173abs_builddir = @abs_builddir@
174abs_srcdir = @abs_srcdir@
175abs_top_builddir = @abs_top_builddir@
176abs_top_srcdir = @abs_top_srcdir@
177ac_adolc_cflags = @ac_adolc_cflags@
178ac_adolc_cxxflags = @ac_adolc_cxxflags@
179ac_aux_dir = @ac_aux_dir@
180ac_ct_AR = @ac_ct_AR@
181ac_ct_CC = @ac_ct_CC@
182ac_ct_CXX = @ac_ct_CXX@
183ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
184am__include = @am__include@
185am__leading_dot = @am__leading_dot@
186am__quote = @am__quote@
187am__tar = @am__tar@
188am__untar = @am__untar@
189bindir = @bindir@
190build = @build@
191build_alias = @build_alias@
192build_cpu = @build_cpu@
193build_os = @build_os@
194build_vendor = @build_vendor@
195builddir = @builddir@
196datadir = @datadir@
197datarootdir = @datarootdir@
198docdir = @docdir@
199dvidir = @dvidir@
200exec_prefix = @exec_prefix@
201host = @host@
202host_alias = @host_alias@
203host_cpu = @host_cpu@
204host_os = @host_os@
205host_vendor = @host_vendor@
206htmldir = @htmldir@
207includedir = @includedir@
208infodir = @infodir@
209install_sh = @install_sh@
210libdir = @libdir@
211libexecdir = @libexecdir@
212localedir = @localedir@
213localstatedir = @localstatedir@
214mandir = @mandir@
215mkdir_p = @mkdir_p@
216oldincludedir = @oldincludedir@
217pdfdir = @pdfdir@
218prefix = @prefix@
219program_transform_name = @program_transform_name@
220psdir = @psdir@
221sbindir = @sbindir@
222sharedstatedir = @sharedstatedir@
223srcdir = @srcdir@
224sysconfdir = @sysconfdir@
225target_alias = @target_alias@
226top_build_prefix = @top_build_prefix@
227top_builddir = @top_builddir@
228top_srcdir = @top_srcdir@
229MAINTAINERCLEANFILES = Makefile.in *~
230@ADDEXA_TRUE@SUBDIRS = clock hessmat lufact ode sparse tapesave timing \
231@ADDEXA_TRUE@                       detexam helm lighthouse scal speelpenning taylor pow \
232@ADDEXA_TRUE@                       checkpointing ext_diff_func fixpoint_exam openmp_exam
233
234@PAREXA_TRUE@SUBDIRS = clock hessmat lufact ode sparse tapesave timing \
235@PAREXA_TRUE@                       detexam helm lighthouse scal speelpenning taylor pow \
236@PAREXA_TRUE@                       checkpointing ext_diff_func fixpoint_exam openmp_exam
237
238all: all-recursive
239
240.SUFFIXES:
241$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
242        @for dep in $?; do \
243          case '$(am__configure_deps)' in \
244            *$$dep*) \
245              ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
246                && { if test -f $@; then exit 0; else break; fi; }; \
247              exit 1;; \
248          esac; \
249        done; \
250        echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign ADOL-C/examples/additional_examples/Makefile'; \
251        $(am__cd) $(top_srcdir) && \
252          $(AUTOMAKE) --foreign ADOL-C/examples/additional_examples/Makefile
253.PRECIOUS: Makefile
254Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
255        @case '$?' in \
256          *config.status*) \
257            cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
258          *) \
259            echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
260            cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
261        esac;
262
263$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
264        cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
265
266$(top_srcdir)/configure:  $(am__configure_deps)
267        cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
268$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
269        cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
270$(am__aclocal_m4_deps):
271
272mostlyclean-libtool:
273        -rm -f *.lo
274
275clean-libtool:
276        -rm -rf .libs _libs
277
278# This directory's subdirectories are mostly independent; you can cd
279# into them and run `make' without going through this Makefile.
280# To change the values of `make' variables: instead of editing Makefiles,
281# (1) if the variable is set in `config.status', edit `config.status'
282#     (which will cause the Makefiles to be regenerated when you run `make');
283# (2) otherwise, pass the desired values on the `make' command line.
284$(RECURSIVE_TARGETS):
285        @fail= failcom='exit 1'; \
286        for f in x $$MAKEFLAGS; do \
287          case $$f in \
288            *=* | --[!k]*);; \
289            *k*) failcom='fail=yes';; \
290          esac; \
291        done; \
292        dot_seen=no; \
293        target=`echo $@ | sed s/-recursive//`; \
294        list='$(SUBDIRS)'; for subdir in $$list; do \
295          echo "Making $$target in $$subdir"; \
296          if test "$$subdir" = "."; then \
297            dot_seen=yes; \
298            local_target="$$target-am"; \
299          else \
300            local_target="$$target"; \
301          fi; \
302          ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
303          || eval $$failcom; \
304        done; \
305        if test "$$dot_seen" = "no"; then \
306          $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
307        fi; test -z "$$fail"
308
309$(RECURSIVE_CLEAN_TARGETS):
310        @fail= failcom='exit 1'; \
311        for f in x $$MAKEFLAGS; do \
312          case $$f in \
313            *=* | --[!k]*);; \
314            *k*) failcom='fail=yes';; \
315          esac; \
316        done; \
317        dot_seen=no; \
318        case "$@" in \
319          distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
320          *) list='$(SUBDIRS)' ;; \
321        esac; \
322        rev=''; for subdir in $$list; do \
323          if test "$$subdir" = "."; then :; else \
324            rev="$$subdir $$rev"; \
325          fi; \
326        done; \
327        rev="$$rev ."; \
328        target=`echo $@ | sed s/-recursive//`; \
329        for subdir in $$rev; do \
330          echo "Making $$target in $$subdir"; \
331          if test "$$subdir" = "."; then \
332            local_target="$$target-am"; \
333          else \
334            local_target="$$target"; \
335          fi; \
336          ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
337          || eval $$failcom; \
338        done && test -z "$$fail"
339tags-recursive:
340        list='$(SUBDIRS)'; for subdir in $$list; do \
341          test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
342        done
343ctags-recursive:
344        list='$(SUBDIRS)'; for subdir in $$list; do \
345          test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
346        done
347
348ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
349        list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
350        unique=`for i in $$list; do \
351            if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
352          done | \
353          $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
354              END { if (nonempty) { for (i in files) print i; }; }'`; \
355        mkid -fID $$unique
356tags: TAGS
357
358TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
359                $(TAGS_FILES) $(LISP)
360        set x; \
361        here=`pwd`; \
362        if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
363          include_option=--etags-include; \
364          empty_fix=.; \
365        else \
366          include_option=--include; \
367          empty_fix=; \
368        fi; \
369        list='$(SUBDIRS)'; for subdir in $$list; do \
370          if test "$$subdir" = .; then :; else \
371            test ! -f $$subdir/TAGS || \
372              set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
373          fi; \
374        done; \
375        list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
376        unique=`for i in $$list; do \
377            if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
378          done | \
379          $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
380              END { if (nonempty) { for (i in files) print i; }; }'`; \
381        shift; \
382        if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
383          test -n "$$unique" || unique=$$empty_fix; \
384          if test $$# -gt 0; then \
385            $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
386              "$$@" $$unique; \
387          else \
388            $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
389              $$unique; \
390          fi; \
391        fi
392ctags: CTAGS
393CTAGS: ctags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
394                $(TAGS_FILES) $(LISP)
395        list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
396        unique=`for i in $$list; do \
397            if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
398          done | \
399          $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
400              END { if (nonempty) { for (i in files) print i; }; }'`; \
401        test -z "$(CTAGS_ARGS)$$unique" \
402          || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
403             $$unique
404
405GTAGS:
406        here=`$(am__cd) $(top_builddir) && pwd` \
407          && $(am__cd) $(top_srcdir) \
408          && gtags -i $(GTAGS_ARGS) "$$here"
409
410distclean-tags:
411        -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
412
413distdir: $(DISTFILES)
414        @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
415        topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
416        list='$(DISTFILES)'; \
417          dist_files=`for file in $$list; do echo $$file; done | \
418          sed -e "s|^$$srcdirstrip/||;t" \
419              -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
420        case $$dist_files in \
421          */*) $(MKDIR_P) `echo "$$dist_files" | \
422                           sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
423                           sort -u` ;; \
424        esac; \
425        for file in $$dist_files; do \
426          if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
427          if test -d $$d/$$file; then \
428            dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
429            if test -d "$(distdir)/$$file"; then \
430              find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
431            fi; \
432            if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
433              cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
434              find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
435            fi; \
436            cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
437          else \
438            test -f "$(distdir)/$$file" \
439            || cp -p $$d/$$file "$(distdir)/$$file" \
440            || exit 1; \
441          fi; \
442        done
443        @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
444          if test "$$subdir" = .; then :; else \
445            test -d "$(distdir)/$$subdir" \
446            || $(MKDIR_P) "$(distdir)/$$subdir" \
447            || exit 1; \
448          fi; \
449        done
450        @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
451          if test "$$subdir" = .; then :; else \
452            dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
453            $(am__relativize); \
454            new_distdir=$$reldir; \
455            dir1=$$subdir; dir2="$(top_distdir)"; \
456            $(am__relativize); \
457            new_top_distdir=$$reldir; \
458            echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
459            echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
460            ($(am__cd) $$subdir && \
461              $(MAKE) $(AM_MAKEFLAGS) \
462                top_distdir="$$new_top_distdir" \
463                distdir="$$new_distdir" \
464                am__remove_distdir=: \
465                am__skip_length_check=: \
466                am__skip_mode_fix=: \
467                distdir) \
468              || exit 1; \
469          fi; \
470        done
471check-am: all-am
472check: check-recursive
473all-am: Makefile
474installdirs: installdirs-recursive
475installdirs-am:
476install: install-recursive
477install-exec: install-exec-recursive
478install-data: install-data-recursive
479uninstall: uninstall-recursive
480
481install-am: all-am
482        @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
483
484installcheck: installcheck-recursive
485install-strip:
486        $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
487          install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
488          `test -z '$(STRIP)' || \
489            echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
490mostlyclean-generic:
491
492clean-generic:
493
494distclean-generic:
495        -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
496        -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
497
498maintainer-clean-generic:
499        @echo "This command is intended for maintainers to use"
500        @echo "it deletes files that may require special tools to rebuild."
501        -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
502clean: clean-recursive
503
504clean-am: clean-generic clean-libtool mostlyclean-am
505
506distclean: distclean-recursive
507        -rm -f Makefile
508distclean-am: clean-am distclean-generic distclean-tags
509
510dvi: dvi-recursive
511
512dvi-am:
513
514html: html-recursive
515
516html-am:
517
518info: info-recursive
519
520info-am:
521
522install-data-am:
523
524install-dvi: install-dvi-recursive
525
526install-dvi-am:
527
528install-exec-am:
529
530install-html: install-html-recursive
531
532install-html-am:
533
534install-info: install-info-recursive
535
536install-info-am:
537
538install-man:
539
540install-pdf: install-pdf-recursive
541
542install-pdf-am:
543
544install-ps: install-ps-recursive
545
546install-ps-am:
547
548installcheck-am:
549
550maintainer-clean: maintainer-clean-recursive
551        -rm -f Makefile
552maintainer-clean-am: distclean-am maintainer-clean-generic
553
554mostlyclean: mostlyclean-recursive
555
556mostlyclean-am: mostlyclean-generic mostlyclean-libtool
557
558pdf: pdf-recursive
559
560pdf-am:
561
562ps: ps-recursive
563
564ps-am:
565
566uninstall-am:
567
568.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) ctags-recursive \
569        install-am install-strip tags-recursive
570
571.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
572        all all-am check check-am clean clean-generic clean-libtool \
573        ctags ctags-recursive distclean distclean-generic \
574        distclean-libtool distclean-tags distdir dvi dvi-am html \
575        html-am info info-am install install-am install-data \
576        install-data-am install-dvi install-dvi-am install-exec \
577        install-exec-am install-html install-html-am install-info \
578        install-info-am install-man install-pdf install-pdf-am \
579        install-ps install-ps-am install-strip installcheck \
580        installcheck-am installdirs installdirs-am maintainer-clean \
581        maintainer-clean-generic mostlyclean mostlyclean-generic \
582        mostlyclean-libtool pdf pdf-am ps ps-am tags tags-recursive \
583        uninstall uninstall-am
584
585
586# Tell versions [3.59,3.63) of GNU make to not export all variables.
587# Otherwise a system limit (for SysV at least) may be exceeded.
588.NOEXPORT:
Note: See TracBrowser for help on using the repository browser.