source: trunk/ADOL-C/examples/additional_examples/Makefile.in @ 289

Last change on this file since 289 was 289, checked in by kulshres, 7 years ago

regenerate files

Signed-off-by: Kshitij Kulshreshtha <kshitij@…>

File size: 17.9 KB
Line 
1# Makefile.in generated by automake 1.11.1 from Makefile.am.
2# @configure_input@
3
4# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
5# 2003, 2004, 2005, 2006, 2007, 2008, 2009  Free Software Foundation,
6# Inc.
7# This Makefile.in is free software; the Free Software Foundation
8# gives unlimited permission to copy and/or distribute it,
9# with or without modifications, as long as this notice is preserved.
10
11# This program is distributed in the hope that it will be useful,
12# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
13# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
14# PARTICULAR PURPOSE.
15
16@SET_MAKE@
17
18##############################################################################
19##############################################################################
20VPATH = @srcdir@
21pkgdatadir = $(datadir)/@PACKAGE@
22pkgincludedir = $(includedir)/@PACKAGE@
23pkglibdir = $(libdir)/@PACKAGE@
24pkglibexecdir = $(libexecdir)/@PACKAGE@
25am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
26install_sh_DATA = $(install_sh) -c -m 644
27install_sh_PROGRAM = $(install_sh) -c
28install_sh_SCRIPT = $(install_sh) -c
29INSTALL_HEADER = $(INSTALL_DATA)
30transform = $(program_transform_name)
31NORMAL_INSTALL = :
32PRE_INSTALL = :
33POST_INSTALL = :
34NORMAL_UNINSTALL = :
35PRE_UNINSTALL = :
36POST_UNINSTALL = :
37build_triplet = @build@
38host_triplet = @host@
39subdir = ADOL-C/examples/additional_examples
40DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in
41ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
42am__aclocal_m4_deps = $(top_srcdir)/acinclude.m4 \
43        $(top_srcdir)/autoconf/dolt.m4 $(top_srcdir)/autoconf/shave.m4 \
44        $(top_srcdir)/configure.ac
45am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
46        $(ACLOCAL_M4)
47mkinstalldirs = $(install_sh) -d
48CONFIG_HEADER = $(top_builddir)/ADOL-C/src/config.h
49CONFIG_CLEAN_FILES =
50CONFIG_CLEAN_VPATH_FILES =
51SOURCES =
52DIST_SOURCES =
53RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
54        html-recursive info-recursive install-data-recursive \
55        install-dvi-recursive install-exec-recursive \
56        install-html-recursive install-info-recursive \
57        install-pdf-recursive install-ps-recursive install-recursive \
58        installcheck-recursive installdirs-recursive pdf-recursive \
59        ps-recursive uninstall-recursive
60RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
61  distclean-recursive maintainer-clean-recursive
62AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
63        $(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
64        distdir
65ETAGS = etags
66CTAGS = ctags
67DIST_SUBDIRS = clock hessmat lufact ode sparse tapesave timing detexam \
68        helm lighthouse scal speelpenning taylor pow checkpointing \
69        ext_diff_func fixpoint_exam openmp_exam
70DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
71am__relativize = \
72  dir0=`pwd`; \
73  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
74  sed_rest='s,^[^/]*/*,,'; \
75  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
76  sed_butlast='s,/*[^/]*$$,,'; \
77  while test -n "$$dir1"; do \
78    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
79    if test "$$first" != "."; then \
80      if test "$$first" = ".."; then \
81        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
82        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
83      else \
84        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
85        if test "$$first2" = "$$first"; then \
86          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
87        else \
88          dir2="../$$dir2"; \
89        fi; \
90        dir0="$$dir0"/"$$first"; \
91      fi; \
92    fi; \
93    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
94  done; \
95  reldir="$$dir2"
96ACLOCAL = @ACLOCAL@
97ADOLC_PATCHLEVEL = @ADOLC_PATCHLEVEL@
98ADOLC_SUBVERSION = @ADOLC_SUBVERSION@
99ADOLC_VERSION = @ADOLC_VERSION@
100AMTAR = @AMTAR@
101AM_MAKEFLAGS = @AM_MAKEFLAGS@
102AR = @AR@
103AS = @AS@
104AUTOCONF = @AUTOCONF@
105AUTOHEADER = @AUTOHEADER@
106AUTOMAKE = @AUTOMAKE@
107AWK = @AWK@
108CC = @CC@
109CCDEPMODE = @CCDEPMODE@
110CFLAGS = @CFLAGS@
111COLPACK_CFLAGS = @COLPACK_CFLAGS@
112COLPACK_LIBS = @COLPACK_LIBS@
113CPP = @CPP@
114CPPFLAGS = @CPPFLAGS@
115CXX = @CXX@
116CXXCPP = @CXXCPP@
117CXXDEPMODE = @CXXDEPMODE@
118CXXFLAGS = @CXXFLAGS@
119CYGPATH_W = @CYGPATH_W@
120DEFS = @DEFS@
121DEPDIR = @DEPDIR@
122DLLTOOL = @DLLTOOL@
123DOLT_BASH = @DOLT_BASH@
124DSYMUTIL = @DSYMUTIL@
125DUMPBIN = @DUMPBIN@
126ECHO_C = @ECHO_C@
127ECHO_N = @ECHO_N@
128ECHO_T = @ECHO_T@
129EGREP = @EGREP@
130EXEEXT = @EXEEXT@
131F77 = @F77@
132FC = @FC@
133FGREP = @FGREP@
134GREP = @GREP@
135INSTALL = @INSTALL@
136INSTALL_DATA = @INSTALL_DATA@
137INSTALL_PROGRAM = @INSTALL_PROGRAM@
138INSTALL_SCRIPT = @INSTALL_SCRIPT@
139INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
140LD = @LD@
141LDFLAGS = @LDFLAGS@
142LIBOBJS = @LIBOBJS@
143LIBS = @LIBS@
144LIBTOOL = @LIBTOOL@
145LIPO = @LIPO@
146LN_S = @LN_S@
147LTCOMPILE = @LTCOMPILE@
148LTCXXCOMPILE = @LTCXXCOMPILE@
149LTLIBOBJS = @LTLIBOBJS@
150MAKEFLAGS = @MAKEFLAGS@
151MAKEINFO = @MAKEINFO@
152MANIFEST_TOOL = @MANIFEST_TOOL@
153MCS = @MCS@
154MKDIR_P = @MKDIR_P@
155NM = @NM@
156NMEDIT = @NMEDIT@
157OBJC = @OBJC@
158OBJDUMP = @OBJDUMP@
159OBJEXT = @OBJEXT@
160OTOOL = @OTOOL@
161OTOOL64 = @OTOOL64@
162PACKAGE = @PACKAGE@
163PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
164PACKAGE_NAME = @PACKAGE_NAME@
165PACKAGE_STRING = @PACKAGE_STRING@
166PACKAGE_TARNAME = @PACKAGE_TARNAME@
167PACKAGE_URL = @PACKAGE_URL@
168PACKAGE_VERSION = @PACKAGE_VERSION@
169PATH_SEPARATOR = @PATH_SEPARATOR@
170Q = @Q@
171RANLIB = @RANLIB@
172SED = @SED@
173SET_MAKE = @SET_MAKE@
174SHELL = @SHELL@
175STRIP = @STRIP@
176V = @V@
177VERSION = @VERSION@
178_lib = @_lib@
179abs_builddir = @abs_builddir@
180abs_srcdir = @abs_srcdir@
181abs_top_builddir = @abs_top_builddir@
182abs_top_srcdir = @abs_top_srcdir@
183ac_adolc_cflags = @ac_adolc_cflags@
184ac_adolc_cxxflags = @ac_adolc_cxxflags@
185ac_aux_dir = @ac_aux_dir@
186ac_ct_AR = @ac_ct_AR@
187ac_ct_CC = @ac_ct_CC@
188ac_ct_CXX = @ac_ct_CXX@
189ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
190am__include = @am__include@
191am__leading_dot = @am__leading_dot@
192am__quote = @am__quote@
193am__tar = @am__tar@
194am__untar = @am__untar@
195bindir = @bindir@
196build = @build@
197build_alias = @build_alias@
198build_cpu = @build_cpu@
199build_os = @build_os@
200build_vendor = @build_vendor@
201builddir = @builddir@
202datadir = @datadir@
203datarootdir = @datarootdir@
204docdir = @docdir@
205dvidir = @dvidir@
206exec_prefix = @exec_prefix@
207host = @host@
208host_alias = @host_alias@
209host_cpu = @host_cpu@
210host_os = @host_os@
211host_vendor = @host_vendor@
212htmldir = @htmldir@
213includedir = @includedir@
214infodir = @infodir@
215install_sh = @install_sh@
216libdir = @libdir@
217libexecdir = @libexecdir@
218localedir = @localedir@
219localstatedir = @localstatedir@
220mandir = @mandir@
221mkdir_p = @mkdir_p@
222oldincludedir = @oldincludedir@
223pdfdir = @pdfdir@
224prefix = @prefix@
225program_transform_name = @program_transform_name@
226psdir = @psdir@
227sbindir = @sbindir@
228sharedstatedir = @sharedstatedir@
229shavedir = @shavedir@
230srcdir = @srcdir@
231sysconfdir = @sysconfdir@
232target_alias = @target_alias@
233top_build_prefix = @top_build_prefix@
234top_builddir = @top_builddir@
235top_srcdir = @top_srcdir@
236MAINTAINERCLEANFILES = Makefile.in *~
237@ADDEXA_TRUE@SUBDIRS = clock hessmat lufact ode sparse tapesave timing \
238@ADDEXA_TRUE@                       detexam helm lighthouse scal speelpenning taylor pow \
239@ADDEXA_TRUE@                       checkpointing ext_diff_func fixpoint_exam openmp_exam
240
241@PAREXA_TRUE@SUBDIRS = clock hessmat lufact ode sparse tapesave timing \
242@PAREXA_TRUE@                       detexam helm lighthouse scal speelpenning taylor pow \
243@PAREXA_TRUE@                       checkpointing ext_diff_func fixpoint_exam openmp_exam
244
245all: all-recursive
246
247.SUFFIXES:
248$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
249        @for dep in $?; do \
250          case '$(am__configure_deps)' in \
251            *$$dep*) \
252              ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
253                && { if test -f $@; then exit 0; else break; fi; }; \
254              exit 1;; \
255          esac; \
256        done; \
257        echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign ADOL-C/examples/additional_examples/Makefile'; \
258        $(am__cd) $(top_srcdir) && \
259          $(AUTOMAKE) --foreign ADOL-C/examples/additional_examples/Makefile
260.PRECIOUS: Makefile
261Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
262        @case '$?' in \
263          *config.status*) \
264            cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
265          *) \
266            echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
267            cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
268        esac;
269
270$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
271        cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
272
273$(top_srcdir)/configure:  $(am__configure_deps)
274        cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
275$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
276        cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
277$(am__aclocal_m4_deps):
278
279mostlyclean-libtool:
280        -rm -f *.lo
281
282clean-libtool:
283        -rm -rf .libs _libs
284
285# This directory's subdirectories are mostly independent; you can cd
286# into them and run `make' without going through this Makefile.
287# To change the values of `make' variables: instead of editing Makefiles,
288# (1) if the variable is set in `config.status', edit `config.status'
289#     (which will cause the Makefiles to be regenerated when you run `make');
290# (2) otherwise, pass the desired values on the `make' command line.
291$(RECURSIVE_TARGETS):
292        @fail= failcom='exit 1'; \
293        for f in x $$MAKEFLAGS; do \
294          case $$f in \
295            *=* | --[!k]*);; \
296            *k*) failcom='fail=yes';; \
297          esac; \
298        done; \
299        dot_seen=no; \
300        target=`echo $@ | sed s/-recursive//`; \
301        list='$(SUBDIRS)'; for subdir in $$list; do \
302          echo "Making $$target in $$subdir"; \
303          if test "$$subdir" = "."; then \
304            dot_seen=yes; \
305            local_target="$$target-am"; \
306          else \
307            local_target="$$target"; \
308          fi; \
309          ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
310          || eval $$failcom; \
311        done; \
312        if test "$$dot_seen" = "no"; then \
313          $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
314        fi; test -z "$$fail"
315
316$(RECURSIVE_CLEAN_TARGETS):
317        @fail= failcom='exit 1'; \
318        for f in x $$MAKEFLAGS; do \
319          case $$f in \
320            *=* | --[!k]*);; \
321            *k*) failcom='fail=yes';; \
322          esac; \
323        done; \
324        dot_seen=no; \
325        case "$@" in \
326          distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
327          *) list='$(SUBDIRS)' ;; \
328        esac; \
329        rev=''; for subdir in $$list; do \
330          if test "$$subdir" = "."; then :; else \
331            rev="$$subdir $$rev"; \
332          fi; \
333        done; \
334        rev="$$rev ."; \
335        target=`echo $@ | sed s/-recursive//`; \
336        for subdir in $$rev; do \
337          echo "Making $$target in $$subdir"; \
338          if test "$$subdir" = "."; then \
339            local_target="$$target-am"; \
340          else \
341            local_target="$$target"; \
342          fi; \
343          ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
344          || eval $$failcom; \
345        done && test -z "$$fail"
346tags-recursive:
347        list='$(SUBDIRS)'; for subdir in $$list; do \
348          test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
349        done
350ctags-recursive:
351        list='$(SUBDIRS)'; for subdir in $$list; do \
352          test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
353        done
354
355ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
356        list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
357        unique=`for i in $$list; do \
358            if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
359          done | \
360          $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
361              END { if (nonempty) { for (i in files) print i; }; }'`; \
362        mkid -fID $$unique
363tags: TAGS
364
365TAGS: tags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
366                $(TAGS_FILES) $(LISP)
367        set x; \
368        here=`pwd`; \
369        if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
370          include_option=--etags-include; \
371          empty_fix=.; \
372        else \
373          include_option=--include; \
374          empty_fix=; \
375        fi; \
376        list='$(SUBDIRS)'; for subdir in $$list; do \
377          if test "$$subdir" = .; then :; else \
378            test ! -f $$subdir/TAGS || \
379              set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
380          fi; \
381        done; \
382        list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
383        unique=`for i in $$list; do \
384            if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
385          done | \
386          $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
387              END { if (nonempty) { for (i in files) print i; }; }'`; \
388        shift; \
389        if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
390          test -n "$$unique" || unique=$$empty_fix; \
391          if test $$# -gt 0; then \
392            $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
393              "$$@" $$unique; \
394          else \
395            $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
396              $$unique; \
397          fi; \
398        fi
399ctags: CTAGS
400CTAGS: ctags-recursive $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
401                $(TAGS_FILES) $(LISP)
402        list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
403        unique=`for i in $$list; do \
404            if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
405          done | \
406          $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
407              END { if (nonempty) { for (i in files) print i; }; }'`; \
408        test -z "$(CTAGS_ARGS)$$unique" \
409          || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
410             $$unique
411
412GTAGS:
413        here=`$(am__cd) $(top_builddir) && pwd` \
414          && $(am__cd) $(top_srcdir) \
415          && gtags -i $(GTAGS_ARGS) "$$here"
416
417distclean-tags:
418        -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
419
420distdir: $(DISTFILES)
421        @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
422        topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
423        list='$(DISTFILES)'; \
424          dist_files=`for file in $$list; do echo $$file; done | \
425          sed -e "s|^$$srcdirstrip/||;t" \
426              -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
427        case $$dist_files in \
428          */*) $(MKDIR_P) `echo "$$dist_files" | \
429                           sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
430                           sort -u` ;; \
431        esac; \
432        for file in $$dist_files; do \
433          if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
434          if test -d $$d/$$file; then \
435            dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
436            if test -d "$(distdir)/$$file"; then \
437              find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
438            fi; \
439            if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
440              cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
441              find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
442            fi; \
443            cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
444          else \
445            test -f "$(distdir)/$$file" \
446            || cp -p $$d/$$file "$(distdir)/$$file" \
447            || exit 1; \
448          fi; \
449        done
450        @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
451          if test "$$subdir" = .; then :; else \
452            test -d "$(distdir)/$$subdir" \
453            || $(MKDIR_P) "$(distdir)/$$subdir" \
454            || exit 1; \
455          fi; \
456        done
457        @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
458          if test "$$subdir" = .; then :; else \
459            dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
460            $(am__relativize); \
461            new_distdir=$$reldir; \
462            dir1=$$subdir; dir2="$(top_distdir)"; \
463            $(am__relativize); \
464            new_top_distdir=$$reldir; \
465            echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
466            echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
467            ($(am__cd) $$subdir && \
468              $(MAKE) $(AM_MAKEFLAGS) \
469                top_distdir="$$new_top_distdir" \
470                distdir="$$new_distdir" \
471                am__remove_distdir=: \
472                am__skip_length_check=: \
473                am__skip_mode_fix=: \
474                distdir) \
475              || exit 1; \
476          fi; \
477        done
478check-am: all-am
479check: check-recursive
480all-am: Makefile
481installdirs: installdirs-recursive
482installdirs-am:
483install: install-recursive
484install-exec: install-exec-recursive
485install-data: install-data-recursive
486uninstall: uninstall-recursive
487
488install-am: all-am
489        @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
490
491installcheck: installcheck-recursive
492install-strip:
493        $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
494          install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
495          `test -z '$(STRIP)' || \
496            echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install
497mostlyclean-generic:
498
499clean-generic:
500
501distclean-generic:
502        -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
503        -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
504
505maintainer-clean-generic:
506        @echo "This command is intended for maintainers to use"
507        @echo "it deletes files that may require special tools to rebuild."
508        -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
509clean: clean-recursive
510
511clean-am: clean-generic clean-libtool mostlyclean-am
512
513distclean: distclean-recursive
514        -rm -f Makefile
515distclean-am: clean-am distclean-generic distclean-tags
516
517dvi: dvi-recursive
518
519dvi-am:
520
521html: html-recursive
522
523html-am:
524
525info: info-recursive
526
527info-am:
528
529install-data-am:
530
531install-dvi: install-dvi-recursive
532
533install-dvi-am:
534
535install-exec-am:
536
537install-html: install-html-recursive
538
539install-html-am:
540
541install-info: install-info-recursive
542
543install-info-am:
544
545install-man:
546
547install-pdf: install-pdf-recursive
548
549install-pdf-am:
550
551install-ps: install-ps-recursive
552
553install-ps-am:
554
555installcheck-am:
556
557maintainer-clean: maintainer-clean-recursive
558        -rm -f Makefile
559maintainer-clean-am: distclean-am maintainer-clean-generic
560
561mostlyclean: mostlyclean-recursive
562
563mostlyclean-am: mostlyclean-generic mostlyclean-libtool
564
565pdf: pdf-recursive
566
567pdf-am:
568
569ps: ps-recursive
570
571ps-am:
572
573uninstall-am:
574
575.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) ctags-recursive \
576        install-am install-strip tags-recursive
577
578.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
579        all all-am check check-am clean clean-generic clean-libtool \
580        ctags ctags-recursive distclean distclean-generic \
581        distclean-libtool distclean-tags distdir dvi dvi-am html \
582        html-am info info-am install install-am install-data \
583        install-data-am install-dvi install-dvi-am install-exec \
584        install-exec-am install-html install-html-am install-info \
585        install-info-am install-man install-pdf install-pdf-am \
586        install-ps install-ps-am install-strip installcheck \
587        installcheck-am installdirs installdirs-am maintainer-clean \
588        maintainer-clean-generic mostlyclean mostlyclean-generic \
589        mostlyclean-libtool pdf pdf-am ps ps-am tags tags-recursive \
590        uninstall uninstall-am
591
592
593# Tell versions [3.59,3.63) of GNU make to not export all variables.
594# Otherwise a system limit (for SysV at least) may be exceeded.
595.NOEXPORT:
Note: See TracBrowser for help on using the repository browser.