source: trunk/ADOL-C/Makefile.in @ 455

Last change on this file since 455 was 455, checked in by kulshres, 6 years ago

regenerate files with maintainer-mode disabled

Signed-off-by: Kshitij Kulshreshtha <kshitij@…>

File size: 19.0 KB
Line 
1# Makefile.in generated by automake 1.13.4 from Makefile.am.
2# @configure_input@
3
4# Copyright (C) 1994-2013 Free Software Foundation, Inc.
5
6# This Makefile.in is free software; the Free Software Foundation
7# gives unlimited permission to copy and/or distribute it,
8# with or without modifications, as long as this notice is preserved.
9
10# This program is distributed in the hope that it will be useful,
11# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
12# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
13# PARTICULAR PURPOSE.
14
15@SET_MAKE@
16
17##############################################################################
18##############################################################################
19VPATH = @srcdir@
20am__is_gnu_make = test -n '$(MAKEFILE_LIST)' && test -n '$(MAKELEVEL)'
21am__make_running_with_option = \
22  case $${target_option-} in \
23      ?) ;; \
24      *) echo "am__make_running_with_option: internal error: invalid" \
25              "target option '$${target_option-}' specified" >&2; \
26         exit 1;; \
27  esac; \
28  has_opt=no; \
29  sane_makeflags=$$MAKEFLAGS; \
30  if $(am__is_gnu_make); then \
31    sane_makeflags=$$MFLAGS; \
32  else \
33    case $$MAKEFLAGS in \
34      *\\[\ \   ]*) \
35        bs=\\; \
36        sane_makeflags=`printf '%s\n' "$$MAKEFLAGS" \
37          | sed "s/$$bs$$bs[$$bs $$bs   ]*//g"`;; \
38    esac; \
39  fi; \
40  skip_next=no; \
41  strip_trailopt () \
42  { \
43    flg=`printf '%s\n' "$$flg" | sed "s/$$1.*$$//"`; \
44  }; \
45  for flg in $$sane_makeflags; do \
46    test $$skip_next = yes && { skip_next=no; continue; }; \
47    case $$flg in \
48      *=*|--*) continue;; \
49        -*I) strip_trailopt 'I'; skip_next=yes;; \
50      -*I?*) strip_trailopt 'I';; \
51        -*O) strip_trailopt 'O'; skip_next=yes;; \
52      -*O?*) strip_trailopt 'O';; \
53        -*l) strip_trailopt 'l'; skip_next=yes;; \
54      -*l?*) strip_trailopt 'l';; \
55      -[dEDm]) skip_next=yes;; \
56      -[JT]) skip_next=yes;; \
57    esac; \
58    case $$flg in \
59      *$$target_option*) has_opt=yes; break;; \
60    esac; \
61  done; \
62  test $$has_opt = yes
63am__make_dryrun = (target_option=n; $(am__make_running_with_option))
64am__make_keepgoing = (target_option=k; $(am__make_running_with_option))
65pkgdatadir = $(datadir)/@PACKAGE@
66pkgincludedir = $(includedir)/@PACKAGE@
67pkglibdir = $(libdir)/@PACKAGE@
68pkglibexecdir = $(libexecdir)/@PACKAGE@
69am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
70install_sh_DATA = $(install_sh) -c -m 644
71install_sh_PROGRAM = $(install_sh) -c
72install_sh_SCRIPT = $(install_sh) -c
73INSTALL_HEADER = $(INSTALL_DATA)
74transform = $(program_transform_name)
75NORMAL_INSTALL = :
76PRE_INSTALL = :
77POST_INSTALL = :
78NORMAL_UNINSTALL = :
79PRE_UNINSTALL = :
80POST_UNINSTALL = :
81build_triplet = @build@
82host_triplet = @host@
83subdir = ADOL-C
84DIST_COMMON = $(srcdir)/Makefile.in $(srcdir)/Makefile.am
85ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
86am__aclocal_m4_deps = $(top_srcdir)/autoconf/acx_builtin.m4 \
87        $(top_srcdir)/autoconf/ampi.m4 \
88        $(top_srcdir)/autoconf/libtool.m4 \
89        $(top_srcdir)/autoconf/ltoptions.m4 \
90        $(top_srcdir)/autoconf/ltsugar.m4 \
91        $(top_srcdir)/autoconf/ltversion.m4 \
92        $(top_srcdir)/autoconf/lt~obsolete.m4 \
93        $(top_srcdir)/autoconf/mpi.m4 $(top_srcdir)/configure.ac
94am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
95        $(ACLOCAL_M4)
96mkinstalldirs = $(install_sh) -d
97CONFIG_HEADER = $(top_builddir)/ADOL-C/src/config.h
98CONFIG_CLEAN_FILES =
99CONFIG_CLEAN_VPATH_FILES =
100AM_V_P = $(am__v_P_@AM_V@)
101am__v_P_ = $(am__v_P_@AM_DEFAULT_V@)
102am__v_P_0 = false
103am__v_P_1 = :
104AM_V_GEN = $(am__v_GEN_@AM_V@)
105am__v_GEN_ = $(am__v_GEN_@AM_DEFAULT_V@)
106am__v_GEN_0 = @echo "  GEN     " $@;
107am__v_GEN_1 =
108AM_V_at = $(am__v_at_@AM_V@)
109am__v_at_ = $(am__v_at_@AM_DEFAULT_V@)
110am__v_at_0 = @
111am__v_at_1 =
112SOURCES =
113DIST_SOURCES =
114RECURSIVE_TARGETS = all-recursive check-recursive cscopelist-recursive \
115        ctags-recursive dvi-recursive html-recursive info-recursive \
116        install-data-recursive install-dvi-recursive \
117        install-exec-recursive install-html-recursive \
118        install-info-recursive install-pdf-recursive \
119        install-ps-recursive install-recursive installcheck-recursive \
120        installdirs-recursive pdf-recursive ps-recursive \
121        tags-recursive uninstall-recursive
122am__can_run_installinfo = \
123  case $$AM_UPDATE_INFO_DIR in \
124    n|no|NO) false;; \
125    *) (install-info --version) >/dev/null 2>&1;; \
126  esac
127RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive \
128  distclean-recursive maintainer-clean-recursive
129am__recursive_targets = \
130  $(RECURSIVE_TARGETS) \
131  $(RECURSIVE_CLEAN_TARGETS) \
132  $(am__extra_recursive_targets)
133AM_RECURSIVE_TARGETS = $(am__recursive_targets:-recursive=) TAGS CTAGS \
134        distdir
135am__tagged_files = $(HEADERS) $(SOURCES) $(TAGS_FILES) $(LISP)
136# Read a list of newline-separated strings from the standard input,
137# and print each of them once, without duplicates.  Input order is
138# *not* preserved.
139am__uniquify_input = $(AWK) '\
140  BEGIN { nonempty = 0; } \
141  { items[$$0] = 1; nonempty = 1; } \
142  END { if (nonempty) { for (i in items) print i; }; } \
143'
144# Make sure the list of sources is unique.  This is necessary because,
145# e.g., the same source file might be shared among _SOURCES variables
146# for different programs/libraries.
147am__define_uniq_tagged_files = \
148  list='$(am__tagged_files)'; \
149  unique=`for i in $$list; do \
150    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
151  done | $(am__uniquify_input)`
152ETAGS = etags
153CTAGS = ctags
154DIST_SUBDIRS = src test include examples
155DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
156am__relativize = \
157  dir0=`pwd`; \
158  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
159  sed_rest='s,^[^/]*/*,,'; \
160  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
161  sed_butlast='s,/*[^/]*$$,,'; \
162  while test -n "$$dir1"; do \
163    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
164    if test "$$first" != "."; then \
165      if test "$$first" = ".."; then \
166        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
167        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
168      else \
169        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
170        if test "$$first2" = "$$first"; then \
171          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
172        else \
173          dir2="../$$dir2"; \
174        fi; \
175        dir0="$$dir0"/"$$first"; \
176      fi; \
177    fi; \
178    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
179  done; \
180  reldir="$$dir2"
181ACLOCAL = @ACLOCAL@
182ADOLC_PATCHLEVEL = @ADOLC_PATCHLEVEL@
183ADOLC_SUBVERSION = @ADOLC_SUBVERSION@
184ADOLC_VERSION = @ADOLC_VERSION@
185ADVBRANCH = @ADVBRANCH@
186AMTAR = @AMTAR@
187AM_DEFAULT_VERBOSITY = @AM_DEFAULT_VERBOSITY@
188AR = @AR@
189AS = @AS@
190ATRIG_ERF = @ATRIG_ERF@
191AUTOCONF = @AUTOCONF@
192AUTOHEADER = @AUTOHEADER@
193AUTOMAKE = @AUTOMAKE@
194AWK = @AWK@
195CC = @CC@
196CCDEPMODE = @CCDEPMODE@
197CFLAGS = @CFLAGS@
198COLPACK_CFLAGS = @COLPACK_CFLAGS@
199COLPACK_LIBS = @COLPACK_LIBS@
200CPP = @CPP@
201CPPFLAGS = @CPPFLAGS@
202CXX = @CXX@
203CXXCPP = @CXXCPP@
204CXXDEPMODE = @CXXDEPMODE@
205CXXFLAGS = @CXXFLAGS@
206CYGPATH_W = @CYGPATH_W@
207DEFS = @DEFS@
208DEPDIR = @DEPDIR@
209DLLTOOL = @DLLTOOL@
210DSYMUTIL = @DSYMUTIL@
211DUMPBIN = @DUMPBIN@
212ECHO_C = @ECHO_C@
213ECHO_N = @ECHO_N@
214ECHO_T = @ECHO_T@
215EGREP = @EGREP@
216EXEEXT = @EXEEXT@
217FGREP = @FGREP@
218GREP = @GREP@
219INSTALL = @INSTALL@
220INSTALL_DATA = @INSTALL_DATA@
221INSTALL_PROGRAM = @INSTALL_PROGRAM@
222INSTALL_SCRIPT = @INSTALL_SCRIPT@
223INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
224LD = @LD@
225LDFLAGS = @LDFLAGS@
226LIBOBJS = @LIBOBJS@
227LIBS = @LIBS@
228LIBTOOL = @LIBTOOL@
229LIPO = @LIPO@
230LN_S = @LN_S@
231LTLIBOBJS = @LTLIBOBJS@
232MAINT = @MAINT@
233MAKEINFO = @MAKEINFO@
234MANIFEST_TOOL = @MANIFEST_TOOL@
235MKDIR_P = @MKDIR_P@
236NM = @NM@
237NMEDIT = @NMEDIT@
238OBJDUMP = @OBJDUMP@
239OBJEXT = @OBJEXT@
240OTOOL = @OTOOL@
241OTOOL64 = @OTOOL64@
242PACKAGE = @PACKAGE@
243PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
244PACKAGE_NAME = @PACKAGE_NAME@
245PACKAGE_STRING = @PACKAGE_STRING@
246PACKAGE_TARNAME = @PACKAGE_TARNAME@
247PACKAGE_URL = @PACKAGE_URL@
248PACKAGE_VERSION = @PACKAGE_VERSION@
249PATH_SEPARATOR = @PATH_SEPARATOR@
250RANLIB = @RANLIB@
251REAL_TYPE = @REAL_TYPE@
252SED = @SED@
253SET_MAKE = @SET_MAKE@
254SHELL = @SHELL@
255STRIP = @STRIP@
256UINT_TYPE = @UINT_TYPE@
257VERSION = @VERSION@
258_lib = @_lib@
259abs_builddir = @abs_builddir@
260abs_srcdir = @abs_srcdir@
261abs_top_builddir = @abs_top_builddir@
262abs_top_srcdir = @abs_top_srcdir@
263ac_adolc_cflags = @ac_adolc_cflags@
264ac_adolc_cxxflags = @ac_adolc_cxxflags@
265ac_aux_dir = @ac_aux_dir@
266ac_ct_AR = @ac_ct_AR@
267ac_ct_CC = @ac_ct_CC@
268ac_ct_CXX = @ac_ct_CXX@
269ac_ct_DUMPBIN = @ac_ct_DUMPBIN@
270adolclib = @adolclib@
271am__include = @am__include@
272am__leading_dot = @am__leading_dot@
273am__quote = @am__quote@
274am__tar = @am__tar@
275am__untar = @am__untar@
276bindir = @bindir@
277build = @build@
278build_alias = @build_alias@
279build_cpu = @build_cpu@
280build_os = @build_os@
281build_vendor = @build_vendor@
282builddir = @builddir@
283datadir = @datadir@
284datarootdir = @datarootdir@
285docdir = @docdir@
286dvidir = @dvidir@
287exec_prefix = @exec_prefix@
288host = @host@
289host_alias = @host_alias@
290host_cpu = @host_cpu@
291host_os = @host_os@
292host_vendor = @host_vendor@
293htmldir = @htmldir@
294includedir = @includedir@
295infodir = @infodir@
296install_sh = @install_sh@
297libdir = @libdir@
298libexecdir = @libexecdir@
299localedir = @localedir@
300localstatedir = @localstatedir@
301mandir = @mandir@
302mkdir_p = @mkdir_p@
303oldincludedir = @oldincludedir@
304pdfdir = @pdfdir@
305prefix = @prefix@
306program_transform_name = @program_transform_name@
307psdir = @psdir@
308sbindir = @sbindir@
309sharedstatedir = @sharedstatedir@
310srcdir = @srcdir@
311sysconfdir = @sysconfdir@
312target_alias = @target_alias@
313top_build_prefix = @top_build_prefix@
314top_builddir = @top_builddir@
315top_srcdir = @top_srcdir@
316AUTOMAKE_OPTIONS = foreign
317@ADDEXA_FALSE@@DOCEXA_FALSE@@PAREXA_FALSE@SUBDIRS = src test include
318@ADDEXA_FALSE@@DOCEXA_FALSE@@PAREXA_TRUE@SUBDIRS = src examples test \
319@ADDEXA_FALSE@@DOCEXA_FALSE@@PAREXA_TRUE@       include
320@ADDEXA_TRUE@@DOCEXA_FALSE@SUBDIRS = src examples test include
321@DOCEXA_TRUE@SUBDIRS = src examples test include
322MAINTAINERCLEANFILES = Makefile.in
323all: all-recursive
324
325.SUFFIXES:
326$(srcdir)/Makefile.in: @MAINTAINER_MODE_TRUE@ $(srcdir)/Makefile.am  $(am__configure_deps)
327        @for dep in $?; do \
328          case '$(am__configure_deps)' in \
329            *$$dep*) \
330              ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
331                && { if test -f $@; then exit 0; else break; fi; }; \
332              exit 1;; \
333          esac; \
334        done; \
335        echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign ADOL-C/Makefile'; \
336        $(am__cd) $(top_srcdir) && \
337          $(AUTOMAKE) --foreign ADOL-C/Makefile
338.PRECIOUS: Makefile
339Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
340        @case '$?' in \
341          *config.status*) \
342            cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
343          *) \
344            echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
345            cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
346        esac;
347
348$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
349        cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
350
351$(top_srcdir)/configure: @MAINTAINER_MODE_TRUE@ $(am__configure_deps)
352        cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
353$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ $(am__aclocal_m4_deps)
354        cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
355$(am__aclocal_m4_deps):
356
357mostlyclean-libtool:
358        -rm -f *.lo
359
360clean-libtool:
361        -rm -rf .libs _libs
362
363# This directory's subdirectories are mostly independent; you can cd
364# into them and run 'make' without going through this Makefile.
365# To change the values of 'make' variables: instead of editing Makefiles,
366# (1) if the variable is set in 'config.status', edit 'config.status'
367#     (which will cause the Makefiles to be regenerated when you run 'make');
368# (2) otherwise, pass the desired values on the 'make' command line.
369$(am__recursive_targets):
370        @fail=; \
371        if $(am__make_keepgoing); then \
372          failcom='fail=yes'; \
373        else \
374          failcom='exit 1'; \
375        fi; \
376        dot_seen=no; \
377        target=`echo $@ | sed s/-recursive//`; \
378        case "$@" in \
379          distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
380          *) list='$(SUBDIRS)' ;; \
381        esac; \
382        for subdir in $$list; do \
383          echo "Making $$target in $$subdir"; \
384          if test "$$subdir" = "."; then \
385            dot_seen=yes; \
386            local_target="$$target-am"; \
387          else \
388            local_target="$$target"; \
389          fi; \
390          ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
391          || eval $$failcom; \
392        done; \
393        if test "$$dot_seen" = "no"; then \
394          $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
395        fi; test -z "$$fail"
396
397ID: $(am__tagged_files)
398        $(am__define_uniq_tagged_files); mkid -fID $$unique
399tags: tags-recursive
400TAGS: tags
401
402tags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
403        set x; \
404        here=`pwd`; \
405        if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
406          include_option=--etags-include; \
407          empty_fix=.; \
408        else \
409          include_option=--include; \
410          empty_fix=; \
411        fi; \
412        list='$(SUBDIRS)'; for subdir in $$list; do \
413          if test "$$subdir" = .; then :; else \
414            test ! -f $$subdir/TAGS || \
415              set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
416          fi; \
417        done; \
418        $(am__define_uniq_tagged_files); \
419        shift; \
420        if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
421          test -n "$$unique" || unique=$$empty_fix; \
422          if test $$# -gt 0; then \
423            $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
424              "$$@" $$unique; \
425          else \
426            $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
427              $$unique; \
428          fi; \
429        fi
430ctags: ctags-recursive
431
432CTAGS: ctags
433ctags-am: $(TAGS_DEPENDENCIES) $(am__tagged_files)
434        $(am__define_uniq_tagged_files); \
435        test -z "$(CTAGS_ARGS)$$unique" \
436          || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
437             $$unique
438
439GTAGS:
440        here=`$(am__cd) $(top_builddir) && pwd` \
441          && $(am__cd) $(top_srcdir) \
442          && gtags -i $(GTAGS_ARGS) "$$here"
443cscopelist: cscopelist-recursive
444
445cscopelist-am: $(am__tagged_files)
446        list='$(am__tagged_files)'; \
447        case "$(srcdir)" in \
448          [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
449          *) sdir=$(subdir)/$(srcdir) ;; \
450        esac; \
451        for i in $$list; do \
452          if test -f "$$i"; then \
453            echo "$(subdir)/$$i"; \
454          else \
455            echo "$$sdir/$$i"; \
456          fi; \
457        done >> $(top_builddir)/cscope.files
458
459distclean-tags:
460        -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
461
462distdir: $(DISTFILES)
463        @srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
464        topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
465        list='$(DISTFILES)'; \
466          dist_files=`for file in $$list; do echo $$file; done | \
467          sed -e "s|^$$srcdirstrip/||;t" \
468              -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
469        case $$dist_files in \
470          */*) $(MKDIR_P) `echo "$$dist_files" | \
471                           sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
472                           sort -u` ;; \
473        esac; \
474        for file in $$dist_files; do \
475          if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
476          if test -d $$d/$$file; then \
477            dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
478            if test -d "$(distdir)/$$file"; then \
479              find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
480            fi; \
481            if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
482              cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
483              find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
484            fi; \
485            cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
486          else \
487            test -f "$(distdir)/$$file" \
488            || cp -p $$d/$$file "$(distdir)/$$file" \
489            || exit 1; \
490          fi; \
491        done
492        @list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
493          if test "$$subdir" = .; then :; else \
494            $(am__make_dryrun) \
495              || test -d "$(distdir)/$$subdir" \
496              || $(MKDIR_P) "$(distdir)/$$subdir" \
497              || exit 1; \
498            dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
499            $(am__relativize); \
500            new_distdir=$$reldir; \
501            dir1=$$subdir; dir2="$(top_distdir)"; \
502            $(am__relativize); \
503            new_top_distdir=$$reldir; \
504            echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
505            echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
506            ($(am__cd) $$subdir && \
507              $(MAKE) $(AM_MAKEFLAGS) \
508                top_distdir="$$new_top_distdir" \
509                distdir="$$new_distdir" \
510                am__remove_distdir=: \
511                am__skip_length_check=: \
512                am__skip_mode_fix=: \
513                distdir) \
514              || exit 1; \
515          fi; \
516        done
517check-am: all-am
518check: check-recursive
519all-am: Makefile
520installdirs: installdirs-recursive
521installdirs-am:
522install: install-recursive
523install-exec: install-exec-recursive
524install-data: install-data-recursive
525uninstall: uninstall-recursive
526
527install-am: all-am
528        @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
529
530installcheck: installcheck-recursive
531install-strip:
532        if test -z '$(STRIP)'; then \
533          $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
534            install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
535              install; \
536        else \
537          $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
538            install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
539            "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
540        fi
541mostlyclean-generic:
542
543clean-generic:
544
545distclean-generic:
546        -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
547        -test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
548
549maintainer-clean-generic:
550        @echo "This command is intended for maintainers to use"
551        @echo "it deletes files that may require special tools to rebuild."
552        -test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
553clean: clean-recursive
554
555clean-am: clean-generic clean-libtool mostlyclean-am
556
557distclean: distclean-recursive
558        -rm -f Makefile
559distclean-am: clean-am distclean-generic distclean-tags
560
561dvi: dvi-recursive
562
563dvi-am:
564
565html: html-recursive
566
567html-am:
568
569info: info-recursive
570
571info-am:
572
573install-data-am:
574
575install-dvi: install-dvi-recursive
576
577install-dvi-am:
578
579install-exec-am:
580
581install-html: install-html-recursive
582
583install-html-am:
584
585install-info: install-info-recursive
586
587install-info-am:
588
589install-man:
590
591install-pdf: install-pdf-recursive
592
593install-pdf-am:
594
595install-ps: install-ps-recursive
596
597install-ps-am:
598
599installcheck-am:
600
601maintainer-clean: maintainer-clean-recursive
602        -rm -f Makefile
603maintainer-clean-am: distclean-am maintainer-clean-generic
604
605mostlyclean: mostlyclean-recursive
606
607mostlyclean-am: mostlyclean-generic mostlyclean-libtool
608
609pdf: pdf-recursive
610
611pdf-am:
612
613ps: ps-recursive
614
615ps-am:
616
617uninstall-am:
618
619.MAKE: $(am__recursive_targets) install-am install-strip
620
621.PHONY: $(am__recursive_targets) CTAGS GTAGS TAGS all all-am check \
622        check-am clean clean-generic clean-libtool cscopelist-am ctags \
623        ctags-am distclean distclean-generic distclean-libtool \
624        distclean-tags distdir dvi dvi-am html html-am info info-am \
625        install install-am install-data install-data-am install-dvi \
626        install-dvi-am install-exec install-exec-am install-html \
627        install-html-am install-info install-info-am install-man \
628        install-pdf install-pdf-am install-ps install-ps-am \
629        install-strip installcheck installcheck-am installdirs \
630        installdirs-am maintainer-clean maintainer-clean-generic \
631        mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \
632        ps ps-am tags tags-am uninstall uninstall-am
633
634
635test: all
636        cd test; $(MAKE) test
637
638# Tell versions [3.59,3.63) of GNU make to not export all variables.
639# Otherwise a system limit (for SysV at least) may be exceeded.
640.NOEXPORT:
Note: See TracBrowser for help on using the repository browser.